Synthesis of functionalized mesoporous material from rice husk ash and its application in the removal of the polycyclic aromatic hydrocarbons

Environmental Science and Pollution Research - The rice husk ash (RHA) was used as an alternative source of silica for the synthesis of the functionalized mesoporous material, which was used in the...     

Microplastic distribution in surface sediments along the Spanish Mediterranean continental shelf

Environmental Science and Pollution Research - Microplastics (MPs) are widely recognised as a contaminant of emerging concern in the marine environment. This work provides original data of the...     

An uptake and elimination kinetics approach to assess the bioavailability of chromium,copper, and arsenic to earthworms (Eisenia andrei) in contaminated field soils

The aim of this study was to determine the bioavailability of metals in field soils contaminated with chromated copper arsenate (CCA) mixtures. The uptake and elimination kinetics of chromium, copper, and arsenic were assessed in the earthworm Eisenia andrei exposed to soils from a gradient of CCA wood preservative contamination near Hartola, Finland. In soils contaminated with 1480–1590 mg Cr/kg dry soil, 642–791 mg Cu/kg dry soil, and 850–2810 mg Ag/kg dry soil, uptake and elimination kinetics patterns were similar for Cr and Cu. Both metals were rapidly taken up and rapidly excreted by Eisenia andrei with equilibrium reached within 1 day. The metalloid As, however, showed very slow uptake and elimination in the earthworms and body concentrations did not reach equilibrium within 21 days. Bioaccumulation factors (BAF) were low for Cu and Cr (< 0.1), but high for As at 0.54–1.8. The potential risk of CCA exposure for the terrestrial ecosystem therefore is mainly due to As.

     

从6-APA和7-ADCA生产废液中回收苯乙酸

采用溶剂萃取、水法提取等方法从6-氨基青霉烷酸和7-氨基-3-去乙酰氧基头孢烷酸生产废液（简称废液）中回收苯乙酸（PAA）,考察了各种因素对回收效果的影响。实验结果表明：以甲苯为萃取剂,在萃取温度30℃、萃取时间15m in、500mL废液中萃取剂加入量130mL的最佳条件下,萃取率为96.5%;在提取温度为65℃左右、结晶温度低于10℃的条件下,PAA收率大于89%,纯度大于99%;所得PAA产品质量好,可用于青霉素G等医药产品的生产。     

采用两段SBR工艺处理石化废水

采用两段序批式活性污泥反应器（SBR）工艺处理高浓度石化废水,考察了DO、MLSS、反应温度对废水处理效果的影响。实验结果表明,两段SBR系统中有机物降解存在着不同的作用机理,第一段主要以去除易降解有机物为主,第二段主要以去除难降解有机物为主。在进水COD为4000mg／L、SBR1中DO为4～5mg／L、MLSS为5000mg／L,SBR2中DO为2～4mg／L、MLSS为3000mg／L、反应温度约为20℃的条件下,废水COD去除率达90％以上。     

含溴水源水臭氧处理时溴酸盐的产生与控制

针对南方某含溴水库水(溴离子浓度15～38μg·L-1),利用连续运行实验装置研究了臭氧氧化时溴酸盐的产生条件,同时初步考察了后续生物活性炭(BAC)对溴酸盐的去除效果.研究结果表明,单独采用预臭氧方式时,在臭氧消耗量控制为2.0mg·L-1以内的条件下,溴酸离子浓度低于6 μg·L-1;而采用预臭氧与后臭氧联合处理时,在总臭氧消耗量为2.0mg·L-1的条件下,出现了溴酸离子超标(10μg·L-1)情况.长期运行结果表明,尽管新炭对溴酸离子没有去除效果,但系统连续运行3个月后,BAC上的微生物对溴酸盐具有一定的去除能力.     

La2O3-CeO2/γ-Al2O3催化剂还原脱硫耐氧特性及其反应机理研究

用浸渍法制备了一系列稀土催化剂,研究了其催化CO还原SO2为单质硫的耐氧特性及影响其耐氧性能的主要因素,运用XRD技术分析了催化剂物相的变化及脱硫产物成分.结果表明,12% La2O3-8% CeO2/γ-Al2O3复组分催化剂比其他La2O3-CeO2/γ-Al2O3催化剂具有更好的耐氧性能;脱硫温度、催化剂用量、SO2与CO的摩尔比等对催化剂的耐氧性能均有明显的影响.最后,探讨了稀土催化剂脱硫机理,并分析在有O2条件下,引起脱硫率下降的原因是反应过程中O2与CO、S发生了竞争性反应.     

超重力技术治理火炸药行业氮氧化物的初步研究

火炸药行业排放氮氧化物(NOX)具有浓度高、排放点不集中和间歇排放的特点,采用超重力技术对尾气中高浓度的NOX进行湿法吸收.以清水为吸收剂,研究了进气量、液气比和超重力因子等因素对NOX吸收率的影响.结果表明,单级NOX吸收率可达64.69%(β＝90).超重力旋转填料床具有占地面积小、投资低和操作方便等优点,适宜于火炸药行业吸收NOX.     

活性炭纤维催化臭氧化降解苯酚及其对炭表面性能的影响

研究了活性炭纤维(ACF)存在下苯酚的臭氧化降解,以及臭氧化过程对炭表面的影响.结果表明:ACF存在下的臭氧化能够显著提高苯酚的分解和矿化,ACF的用量为1 g时.反应10 min后苯酚和COD的去除率分别为96.8%和88.4%,而活性炭在同样条件下对苯酚和COD的去除率仅分别为68.0%和63.6%;臭氧化后的ACF表面含氧官能团、比表面积和总孔体积都发生了变化,内酯基减少,羧基、羟基和羰基增多,表面更亲水;比表面积增加且主要集中在微孔,而微孔体积的减少表明较小孔径的微孔数量显著增多,同时出现极少量中孔和大孔.     

铁屑/焦炭/H2O2法预处理焦化废水的试验研究

采用铁屑/焦炭/H2O2法对焦化废水进行处理,通过单因素试验法考察了铁炭比、铁炭用量、H2O2用量、废水pH以及反应时间对处理效果的影响,并确定了最适工艺条件。结果表明,铁屑/焦炭/H2O2法与常规的铁屑内电解法相比,可显著提高焦化废水的预处理效果,并缩短反应时间。铁屑/焦炭/H2O2法处理焦化废水的最适条件为:铁炭比为4,铁炭用量为300mg/L铁屑+75mg/L焦炭,H2O2用量为1000mg/L,pH为3,反应时间20min。在此条件下,COD、色度、NH3-N和CN-的去除效率分别可达61.2%、74.0%、56.2%和74.3%,B/C比由处理前的0.189提高到0.387,处理水可生化性良好。铁屑/焦炭/H2O2可作为焦化废水的一种有效的预处理方法。