Biodegradable Water Soluble Copolymer for Antimicrobial Applications

Synthesis and characterization of novel biodegradable, water soluble and optically active DL-malic acid (DMA) and citric acid (CA) copolymers were studied for possible use as antibacterial agents. The copolymers were synthesized by direct bulk melt condensation in the absence of a catalyst above 150 °C. Characterization of obtained copolymers was carried out with the help of infrared absorption spectra, differential scanning calorimetry and thermo gravimetric analysis. The antibacterial activity of copolymers against bacteria was investigated. The results obtained shows the above copolymers possess a broad wound dressing activity against different types of bacteria and may be useful as antibacterial agents.     

Fuel efficiency improvement of a dual-fuel engine fuelled with Honge oil methyl ester (HOME)–bioethanol and producer gas

Renewable and alternative fuels have numerous advantages compared with fossil fuels as they are renewable and biodegradable and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues (Yaliwal et al. 2013. International Journal of Sustainable Engineering, doi:10.1080/19397038.2013.801530. Zhu et al. 2011a, Applied Thermal Engineering 31 (14–15): 2271–2278; Zhu et al. 2011b, Fuel 90: 1743-1750; Banapurmath, Tewari, and Hosmath 2008, Renewable Energy 33: 2007-2018; Banapurmath 2009, “Performance, Combustion and Emission Characteristics of a Single Cylinder Direct Injection CI Engine Operated on Dual Fuel Mode Using Honge Oil and Producer Gas.” PhD thesis, 1–195; Banapurmath et al. 2011, Waste and Biomass Valorization 2: 1–11). In this context, the main objective of the present work is to study methods of biofuel production such as Honge oil methyl ester (HOME) using a conventional transesterification process and bioethanol from the Calliandra calothyrsus shrub using a new pretreatment method known as hydrothermal explosion. Further, experimental investigations were carried out on a single-cylinder, four-stroke, direct-injection stationary diesel engine operating in a dual-fuel mode using HOME, bioethanol and producer gas combinations to determine its performance, combustion and emission characteristics. The performance of the dual-fuel engine was analyzed at optimized engine conditions. HOME-Bioethanol (BE) blends such as HOME+ 5% bioethanol (BE5), HOME+ 10% bioethanol (BE10) and HOME+ 15% bioethanol (BE15) were prepared by adding bioethanol to HOME (on volume basis) in different proportions ranging from 5 to 15% with an increment of 5%. In this present work, the effect of different BE blends on the performance of producer gas fuelled dual fuel engine was studied. Experimental investigation on dual fuel engine using BE5-Producer gas operation resulted in up to 4–9% increased brake thermal efficiency with decreased hydrocarbon (HC), carbon monoxide (CO) and marginally increased nitric oxide (NOx) emission levels compared to HOME-Producer gas, BE10-producer gas and BE15-producer gas mode of operation. However, it was observed that, the overall performance of BE-producer gas operation was found to be lower compared to diesel-producer gas operation.     

The use of the cotton-strip assay to assess cellulose decomposition in heavy metal-contaminated sewage sludge-amended soils

Cellulose decomposition in soils amended over twenty year ago with heavy metal-contaminated sewage sludges was assessed by using the cotton-strip assay. The soils of the Luddington Experiment now contain concentrations of Cu, Ni and Zn in selected plots that approximate to or exceed the statutory limits for these elements in sewage sludge-amended soils. The rates of cellulose decomposition were generally lower in the plots with elevated metal concentrations, relative to uncontaminated sludge-amended and unsludged controls. Generally, the metal-rich plots showed reductions in the time taken to reach 50% cotton-tensile-strength loss (CTSL). However, the reductions could not be consistently related to any one metal. The difference in decomposition rates between treatments was systematically reduced over the duration of a time-course experiment. A lower initial population of the appropriate decomposer community of micro-organisms may account for the observed short-term lag in decomposition rates.     

A teratological assessment of four trihalomethanes in the rat

Four trihalomethanes were administered by gavage to Sprague-Dawley rats from day 6 to day 15 of gestation. Chloroform (Ch) was administered at levels of 100, 200 and 400 mg/kg and bromoform (Br), bromodichloromethane (BDCM) and chlorodibromomethane (CDBM) were administered at levels of 50, 100 or 200 mg/kg/day. A separate control was used for each compound. Maternal weight gain was depressed in all groups receiving Ch and at the highest dose levels of BDCM and CDBM. Ch administration caused decreased maternal hemoglobin and hematocrit values at all dose levels and also produced increased serum inorganic phosphorus and cholesterol at the highest dose. Liver enlargement was observed at all dose levels of Ch but in no other treatment groups. Evidence of a fetotoxic response was observed with Ch, CDBM and Br but not BDCM. No dose-related histopathological changes were observed in either mothers or fetuses as a result of treatment. None of the chemicals tested produced any teratogenic effects.     

The asiatic clam, Corbicula fluminea: An indicator of trace metal pollution in the Shatt al-Arab River, Iraq

The potential of Corbicula fluminea (Müller) as an indicator for trace metal pollution was investigated. Laboratory experiments show that Corbicula has the capability to accumulate and eliminate trace metals in relation to their concentrations in ambient water. However, an effect of individual size was observed. Seasonal variations in the concentrations of Cd, Co, Cu, Fe, Mn, Ni, Pb, V and Zn in Corbicula, water and particulate matter from the upper section of the Shatt al-Arab River were studied. Sediment samples were also analysed. Metal concentrations were determined by means of flameless AAS. It was found that Corbicula is a suitable bio-indicator for monitoring of trace metal pollution. Metal concentrations in Corbicula tissues correlated better with their corresponding concentrations in particulate matter than with the dissolved form. Temporal variations in metal concentrations were attributed to several factors, including fluctuations in metal inputs, and in geochemical and hydrological characteristics of the water. The obtained levels of trace metals were comparable to those reported for control sites, with the exception of Cd, Cu and Zn whose concentrations were higher in both Corbicula and particulate matter.     

Root growth responses of Anagallis arvensis L., primulaceae to air pollution

The root growth response to air pollution in populations of Anagallis arvensis growing about 0.5, 2, 6, 12 and 20 km leeward from a power plant complex varied with the level of pollution, age of the stand and meteorological conditions. The roots were more affected by the pollutants at a young stage and the loss in net primary productivity was proportional to the pollution level. The populations up to 2 km from the source of pollution completed their life cycle quickly. The coal consumption rate at the power plant, relative humidity, wind direction and other environmental factors were found to influence the degree of growth response to air pollution.