Correction to: Briquettes of acai seeds: characterization of the biomass and influence of the parameters of production temperature and pressure in the physical-mechanical and energy quality

Environmental Science and Pollution Research - A Correction to this paper has been published: 10.1007/s11356-021-16529-z     

Alternative herbicides to manage Italian ryegrass (Lolium multiflorum lam) resistant to glyphosate at different phenological stages

During the growing season of 2002--2003, field and greenhouse experiments were conducted with the objective of evaluating the influence of Italian ryegrass phenological stages and management alternatives on the control of resistant biotypes to glyphosate. Three field experiments were conducted in Lagoa Vermelha, RS, Brazil and glyphosate was applied alone and in combinations with alternative herbicides. Two greenhouse experiments were also conducted at the Department of Crop Science, ESALQ/USP, Piracicaba, SP, Brazil. The Italian ryegrass resistant population was collected from Lagoa Vermelha, RS, Brazil. From the results it was possible to conclude that: (i) the more advanced the phenological stage of application, the more difficult the control of resistant Italian ryegrass by glyphosate, mainly by the rate of 960 g a.i. ha(-1); however, this rate applied at earlier phenological stage (five tillers), the control was higher than 90%; (ii) with the increment of glyphosate rate, it significant response was observed on the control at all stages of application; (iii) the mixture of glyphosate + clethodim (1440 + 72 g a.i. ha(-1)), paraquat + diuron (500 + 250 g a.i. ha(-1)), at all stages of application and clethodim (96 g a.i. ha(-1)) and paraquat + diuron (300 + 150 g a.i. ha(-1)) at the initial stages until pre-flowering were excellent alternatives for management of these populations; and (iv) the response of control was much faster for the mixture of glyphosate + clethodim, independently of growth stage.     

Comparative study on the susceptibility of freshwater species to copper-based pesticides

Copper compounds have been intentionally introduced into water bodies as aquatic plant herbicides, algicides and molluscicides. Copper-based fertilizers and fungicides have been widely used in agriculture as well. Despite the fact that copper is an essential element for all biota, elevated concentrations of this metal have been shown to affect a variety of aquatic organisms. Nonetheless, comparative studies on the susceptibility of different freshwater species to copper compounds have seldom been performed. This study was conducted to compare toxicity of copper-based pesticides (copper oxychloride, cuprous oxide and copper sulfate) to different freshwater target (Raphidocelis subcapitata, a planktonic alga and Biomphalaria glabrata, a snail) and non-target (Daphnia similis, a planktonic crustacean and Danio rerio, a fish) organisms. Test water parameters were as follows: pH = 7.4 +/- 0.1; hardness 44 +/- 1 mg/l as CaCO3; DO 8-9 mg/l at the beginning and > 4 mg/l at the end; temperature, fish and snails 25 +/- 1 degrees C, Daphnia 20 +/- 2 degrees C, algae 24 +/- 1 degrees C. D. similis (immobilization), 48-h EC50s (95% CLs) ranging from 0.013 (0.011-0.016) to 0.043 (0.033-0.057) mg Cu/l, and R. subcapitata (growth inhibition), 96-h IC50s from 0.071 (0.045-0.099) to 0.137 (0.090-0.174) mg Cu/l, were the most susceptible species. B. glabrata (lethality), 48-h LC50s from 0.179 (0.102-0.270) to 0.854 (0.553-1.457) mg Cu/l, and D. rerio (lethality), 48-h LC50s 0.063 (0.045-0.089), 0.192 (0.133-0.272) and 0.714 (0.494-1.016) mg Cu/l, were less susceptible than Daphnia to copper-based pesticides. Findings from the present study therefore suggest that increased levels of copper in water bodies is likely to adversely affect a variety of aquatic species.     

Emission of air pollutants from burning candles with different composition in indoor environments

Candle composition is expected to influence the air pollutants emissions, possibly leading to important differences in the emissions of volatile organic compounds and polycyclic aromatic hydrocarbons. In this regard, the purity of the raw materials and additives used can play a key role. Consequently, in this work emission factors for some polycyclic aromatic hydrocarbons, aromatic species, short-chain aldehydes and particulate matter have been determined for container candles constituted by different paraffin waxes burning in a test chamber. It has been found that wax quality strongly influences the air pollutant emissions. These results could be used, at least at a first glance, to foresee the expected pollutant concentration in a given indoor environment with respect to health safety standards, while the test chamber used for performing the reported results could be useful to estimate the emission factors of any other candle in an easy-to-build standardised environment.     

Organic compounds temporal trends at some invertebrate species from the Balearics, Western Mediterranean

Concentrations of persistent organic pollutants (POPs) such as hexachlorobenzene (HCB), dichlore diphenyl trichloretane (DDT), polychlorinated biphenyls (PCBs), and gamma-hexachlorocyclohexane (gamma-HCH or lindane) were determined in tissue of marine benthic invertebrates such as Mytilus galloprovincialis, Chamelea gallina, Venus verrucosa, Lithophaga lithophaga and Paracentrotus lividus. Species were selected due to their habitat, trophic level, feeding behaviour and their consumption. Invertebrate species were systematically sampled from December 1996 to December 2005 from several sites along the Balearic Islands. The highest concentrations of PCBs (785ng/g lipid) were found in M. galloprovincialis while the lowest concentrations were found in the sea-urchin P. lividus (193ng/g lipid). Among the 7 PCB quantified congeners the higher values are mainly obtained for CB138 and CB153. All bivalves presented higher PCBs contents than the sea-urchin P. lividus are possibly linked with the bioaccumulation process of POPs throughout the food web and to differential detoxifying mechanisms. The concentration of SigmaDDT exceeds that of HCB and gamma-HCH at all species and sampling stations. DDT concentrations ranged from 0.4ng/g ww at the bivalve C. gallina in 2002, to values of 15.8ng/g ww at the bivalve L. lithophaga in 1998. The values obtained for the organic compounds (HCH, HCB, PCBs, DDT) depend upon the place and year of sampling and are compared to values found by other authors for the mussel M. galloprovincialis in other Mediterranean areas. gamma-HCH and HCB were found in lower concentrations than the other POPs.     

Mass balance in the monitoring of pollutants in tidal rivers of the Guanabara Bay, Rio de Janeiro, Brazil

This study addressed the identification and monitoring of pollution sources of terrestrial origin in rivers (domestic sewage and industrial effluents) and critical fluvial segments in highly polluted environments under tidal influence (mixing marine and continental sources) from Guanabara Bay Basin, Rio de Janeiro, Brazil. The mass balance of contaminants was determined in conditions of continuous flow (low tide) during dry season (lower dilution capability). The results allowed the evaluation of the potential of contaminant mass generation by the different river segments and the estimation of their natural and anthropogenic components. The water quality of Igua?ú and Sarapuí Rivers were evaluated for metals and biochemical oxygen demand. The method gave an excellent response, including the possibility of sources identification and contaminated river segments ranking. The approach also offers fast execution and data interpretation, being highly efficient.     

Influence of Environmental Factors on the Evolution of Industrial Noise-Induced Hearing Loss

The aim of the study is to investigate how environmental factors, associated with exposure to industrial noise, affect the development of chronic noise-induced hearing loss.The studywas conducted on 186 male subjectsworking in two bottling plants, situated respectively in a small farming community, and in a medium-sized city with significant levels of noise pollution. Levels of occupational exposure were the same for the two groups.The subjects were selected by means of a preliminary medical examination, and exposed to tonal hearing tests and acoustic impedance tests. Statistical analysis was performed on hearing threshold values obtained at the frequencies of 500, 1000, 2000 and 4000 Hz.The comparison between the thresholds obtained in the two groups showed a statistically significant difference, especially at the frequency of 4000 Hz and for occupational exposure exceeding 17 yr. The results led us to conclude that environmental factors, and urban noise in particular, influence the onset and development of occupational acoustic trauma, and that those working in the country are significantly less affected than those in the city. Since occupational exposure was the same for both groups, their different responses must therefore be interpreted as due to differences in nonoccupational exposure, in turn dependent on different opportunities for rest from noise and different levels of exposure to noise pollution.     

Sampling gaseous oxidation products of aromatic compounds in gas/particle separation systems

In this study we performed a direct comparison between two different ambient air samplers to characterize their performance in sampling oxidized gaseous organic compounds, known as oxidation products of aromatics. We investigated compounds with a variety of functional groups and vapor pressures. A polyurethane foam (PUF) adsorbent and an annular diffusion denuder sampler were operated along with particle filters. In both systems the sampling devices were liquid-extracted, followed by derivatization and analysis by GC-MS. The PUF system works very well for aromatic as well as non-aromatic compounds, whereas the denuder shows smaller collection efficiencies for highly volatile non-aromatic compounds. In addition, the sampling efficiencies in the PUF set-up are in good agreement with the calculated vapor pressures of the compounds and also the particle phase is not affected by most compounds.     

Chlorination in a wastewater treatment plant: acute toxicity effects of the effluent and of the recipient water body

This study investigates the impact of wastewater treatment plant (WWTP) effluent on the toxicity of the recipient water body and the effectiveness of the disinfection treatment applied (sodium hypochloride) to assure the compliance of both microbiological and toxicological emission limits. No toxicity was found in the majority of samples collected from the recipient river, upstream and downstream of the WWTP, using three different toxicity tests (Vibrio fischeri, Daphnia magna, and Pseudokirchneriella subcapitata). Only three samples presented toxic unit (TU) values with V. fischeri, and one presented TU with P. subcapitata. The influent toxicity ranged from slightly toxic to toxic (TU = 0.68–4.47) with V. fischeri, while only three samples presented TU values with the other tests. No toxicity was found in the absence of chlorination, while the mean toxicity was 3.42 ± 4.12 TU with chlorination in the effluent. Although no toxicity or very slight toxicity was found in the receiving water, its residual toxicity was higher than the US EPA Quality Standard in two samples. Escherichia coli concentration had a lower mean value in the chlorinated effluent: 13,993 ± 12,037 CFU/100 mL vs. 62,857 ± 80,526 CFU/100 mL for the not chlorinated effluent. This difference was shown to be significant (p < 0.05). E. coli in ten chlorinated samples was higher than the limit established by European and Italian Legislation. The mean highest trihalomethanes (THMs) value was found in the influent samples (2.79 ± 1.40 μg/L), while the mean highest disinfection by-products (DBPs) was found in the effluent samples (1.85 ± 2.25 μg/L). Significant correlations were found between toxicity, sodium hypochlorite, THMs, DBPs, E. coli, and residual chlorine. In conclusion, this study highlighted that the disinfection of wastewater effluents with sodium hypochlorite determines the increase of the toxicity, and sometimes is not enough to control the E. coli contamination.