Poly(Ethylene Glycol) as a Compatibilizer for Poly(Lactic Acid)/Thermoplastic Starch Blends

A new route to prepare poly(lactic acid) (PLA)/thermoplastic starch (TPS) blends is described in this work using poly(ethylene glycol) (PEG), a non-toxic polymer, as a compatibilizer. The influence of PEG on the morphology and properties of PLA/TPS blends was studied. The blends were processed using a twin-screw micro-compounder and a micro-injector. The morphologies were analyzed by scanning and transmission electron microscopies and the material properties were evaluated by dynamic-mechanical, differential scanning calorimetry, thermogravimetric analysis and mechanical tests. PLA/TPS blends presented large TPS phase size distribution and low adhesion between phases which was responsible for the lower elastic modulus of this blend when compared to pure PLA. The addition of PEG resulted in the increase of PLA crystallization, due to its plasticizing effect, and improvement of the interfacial interaction between TPS and PLA matrix. Results show that incorporation of PEG increased the impact strength of the ternary blend and that the elastic modulus remained similar to the PLA/TPS blend.     

Copper, nickel and lead in lichen and tree bark transplants over different periods of time

This work aimed at comparing the dynamics of atmospheric metal accumulation by the lichen Flavoparmelia caperata and bark of Platanus hybrida over different periods of time. Transplants were exposed in three Portuguese coastal cities. Samples were retrieved (1) every 2 months (discontinuous exposure), or (2) after 2-, 4-, 6-, 8- and 10-month periods (continuous exposure), and analysed for Cu, Ni and Pb. Airborne accumulation of metals was essentially independent of climatic factors. For both biomonitors [Pb]>[Ni]>[Cu] but Pb was the only element for which a consistent pattern of accumulation was observed, with the bark outperforming the lichen. The longest exposure periods hardly ever corresponded to the highest accumulation. This might have been partly because the biomonitors bound and released metals throughout the exposure, each with its own dynamics of accumulation, but both according to the environmental metal availability.     

Metal and hydrocarbon behavior in sediments from Brazilian shallow waters drilling activities using nonaqueous drilling fluids (NAFs)

The impact of drilling oil activities in the Brazilian Bonito Field/Campos Basin (Rio de Janeiro) shell drilling (300 m) using nonaqueous fluids (NAFs) was investigated with respect to Al, Fe, Mn, Ba, Co, Pb, Cu, As, Hg, Cr, Ni, Zn, Cd, V, and aliphatic and polynuclear aromatic hydrocarbons concentrations in the sediment. Sampling took place in three different times during approximately 33 months. For the metals Al, As, Co, Cr, Cu, Cd, Fe, Ni, Mn, V, and Zn, no significant variation was observed after drilling activities in most of the stations. However, an increase was found in Ba concentration—due to the drilling activity—without return to the levels found 22 months after drilling. High Ba contents was already detected prior to well drilling, probably due to drilling activities in other wells nearby. Hydrocarbon contents also suggest previous anthropogenic activities. Aliphatic hydrocarbon contents were in the range usually reported in other drilling sites. The same behavior was observed in the case of polyaromatic hydrocarbons. Nevertheless, the n-alkane concentration increased sharply after drilling, returning almost to predrilling levels 22 months after drilling activities.     

Trends in nutrient and sediment retention in Great Plains reservoirs (USA)

Reservoirs are artificial ecosystems with physical, chemical, and biological transitional characteristics between rivers and lakes. Greater water retention time in reservoirs provides conditions for cycling materials inputs from upstream waters through sedimentation, biological assimilation and other biogeochemical processes. We investigated the effects of reservoirs on the water quantity and quality in the Great Plains (Kansas, USA), an area where little is known about these dominant hydrologic features. We analyzed a 30-year time-series of discharge, total phosphorus (TP), nitrate (NO₃ ^?), and total suspended solids (TSS) from six reservoirs and estimated overall removal efficiencies from upstream to downstream, testing correlations among retention, discharge, and time. In general, mean removal of TP (42–74 %), TSS (0–93 %), and NO₃ ^? (11–56 %) from upstream to downstream did not change over 30 years. TP retention was associated with TSS removal, suggesting that nutrient substantial portion of P was adsorbed to solids. Our results indicated that reservoirs had the effect of lowering variance in the water quality parameters and that these reservoirs are not getting more or less nutrient-rich over time. We found no evidence of temporal changes in the yearly mean upstream and downstream discharges. The ratio upstream/downstream discharge was analyzed because it allowed us to assess how much contribution of additional unsampled tributaries may have biased our ability to calculate retention. Nutrient and sediment removal was less affected by hydraulic residence time than expected. Our study demonstrates that reservoirs can play a role in the removal and processing of nutrient and sediments, which has repercussions when valuing their ecological services and designing watershed management plans.     

Unraveling the water and land nexus through inter- and transdisciplinary research: sustainable land management in a semi-arid watershed in Brazil’s Northeast

For decades, large reservoirs have been built for hydropower plants in Brazil’s São Francisco River Basin. Rural development has been a simultaneous goal with a primary focus on irrigation. Irrigated agriculture, however, has suffered from poor soils, insufficient water management strategies, and a disregard for integrating grazing-based smallholdings outside of the irrigation schemes. Recurrent droughts are distressing all sectors. This synthesis assessed sustainable land management options by investigating the aquatic and terrestrial land use systems alongside their underlying ecosystem functions and services. Decisions about the allocation of scarce water proved to be both the major issue of land use discourses and driver of practices. The primarily hydroelectricity-focused water management practice cannot be maintained at the same level in the long run, as it has become ever more adverse towards competing water usages. The increasing use of the water and adjacent land also constitutes a major potential threat to water quality. Managed water level fluctuations should generally mimic natural patterns. Wind and solar power generation are suitable complements to agricultural land use. Cycling scarce nutrients between aquatic and terrestrial sectors is ambitious but promising, ultimately improving the generally poor soils in the area. Smart management of biodiversity can foster intensively-irrigated cropping, although the non-irrigated Caatinga ecosystem needs better management of its conflicting uses. Aims and responsibilities of multi-level planning and management require clarification and coordination between sectors, while practices of public participation should be revised in order to better support a comprehensive and transparent transition towards sustainability.     

Effects of Weathering on Mechanical,Antimicrobial Properties and Biodegradation Process of Silver Loaded TPE Compounds

The incorporation of antimicrobial metals such as silver is an alternative to protect the material against microbial attack. However, loaded polymer can lose its antimicrobial properties after some time of use, and the additive may even leak out into the environment becoming harmful to non-target organisms. This study aims to evaluate the mechanical properties and antimicrobial activity of silver containing thermoplastic elastomer (TPE) samples exposed to weathering and the influence of additive incorporation in material biodegradation in the soil. For this purpose, silver ions (Ag⁺_bentonite, Ag⁺_phosphate) and silver nanoparticles (AgNp_silica) based additives were blended in a formulation of SEBS, polypropylene and mineral oil. The test samples were exposed to natural ageing over nine months, and were then evaluated according to their mechanical properties, antimicrobial activity, and degree of crystallinity and surface characteristics. The biodegradation process before and after natural ageing was evaluated through the generation of carbon dioxide. The results show that the action of natural ageing reduced the mechanical properties of loaded and unloaded TPE, and modified the degree of crystallinity and the chemical characteristic of the TPE surface. The presence or type of additive did not influence material resistance after being exposed to weathering. A decrease in antimicrobial activity in samples after natural ageing was observed. At a variable level and according to the chemical content, generation of carbon dioxide from TPE samples was greater in aged samples than in unexposed ones.     

Wave hydrodynamics around a multi-functional artificial reef at Leirosa

This paper describes an application of the Boussinesq-type COULWAVE model to study the wave hydrodynamics in the vicinity of a multi-functional artificial reef (MFAR). This reef is under investigation and consists of a supplementary protection solution for the Leirosa sand dune system located at South of Figueira da Foz, on the Portuguese West coast. Such installation near the coastline is expected to contribute to enhance the surfing conditions in the area, protect the sand dune system in the surroundings of Leirosa beach, and increase its environmental value. Numerical calculations with the COULWAVE model were performed for four test cases, considering two reef geometries (differing in the reef angle) and two incident wave conditions (storm condition and a common wave condition). Comparisons between the results obtained, in terms of wave heights and breaking line positions allow us to assess the influence of the reef on the hydrodynamics near the beach and around the reef. Moreover, the reef performance was analysed in terms of surfability and coastal protection. The surfability parameters (breaker height, Iribarren number and peel angle) were calculated for each test case using the numerical wave heights, wave directions and wave breaking positions. Comparisons of parameters allow characterizing the most appropriate configuration of the reef to improve the surfing conditions in the study area. A methodology based on numerical free surface elevations and horizontal velocity components was developed to calculate wave directions, since this is not a direct output of the COULWAVE model. Concerning coastal protection, analyses of the mean currents around the reef were used together with observations of the velocity cells near the shoreline as an indication of the sediment transport.     

Landslides into reservoirs and their impacts on banks

Mass wasting processes, like slope failures, on the margins of dam reservoirs, lakes, bays and oceans may generate large water waves that can produce disasters due to flooding over the banks, run up along the shoreline and overtopping dam crests. Therefore, the study of slope failures, the subsequent generation of impulse waves and their consequences are of paramount importance for safety. In this paper the generation and propagation of water waves in reservoirs induced by landslides and their impact on banks were investigated by means of a laboratory study carried out at University of Coimbra wave channel, in a flume measuring 12.0 m  ×  1.5 m  ×  1.0 m (L  ×  H  ×  W), where two banks with variable slope were placed. The study considered the sliding of calcareous blocks over a sliding slope bank into the reservoir, the generation of impulse waves, their propagation in the reservoir and their impact on the downstream bank. A number of waves were generated by different fallings of calcareous blocks, considering different volumes, sliding slopes, initial positions and reservoir depths. All fallings were recorded by video-camera and the results were processed afterwards to obtain the time history of the falling. The water surface variations due to transient waves were measured at five gauges placed between the banks. The waves overtopping and breaking on the downstream bank were also filmed using a video camera, and the hydrodynamic forces on this bank were also measured using four pressure transducers.