Comparison between solid-phase extraction methods for the chromatographic determination of organophosphorus pesticides in water

A solid-phase microextraction (SPME) procedure has been developed to extract eight organophosphorus pesticides (OPs) in water and the method was compared with a conventional solid phase extraction (SPE) technique. The extracted OPs were analyzed by gas chromatography using thermionic specific detection. Both extraction methods presented linear calibration at least over the concentration range investigated (100 to 1000 ng x mL(-1) for SPE and 1 to 100 ng x mL(-1) for SPME). SPME method presented higher sensitivity than SPE. The quantitation limits were between 0.1 to 1.0 ng x mL(-1) for SPME depending upon the analyte, and 100 ng x mL(-1) for SPE. The precision, as measured by the standard deviations (RSD), were in the range 3.6% to 5.8% for SPME and 2.4% to 9.2% for SPE. Along with the feature of being a solvent - free sampling technique, SPME offers additional benefits due to its high sensitivity, simplicity, and small size sample required (typically: SPE - 500 mL, SPME - 5 mL).     

Comparison of the substrate effect on voc emissions from water based varnish and latex paint

BACKGROUND, AIMS AND SCOPE: The building materials are recognised to be major contributors to indoor air contamination by volatile organic compounds (VOCs). The improvement of the quality of the environment within buildings is a topic of increasing research and public interest. Legislation in preparation by the European Commission may induce, in the near future, European Union Member States to solicit the industries of paints, varnishes and flooring materials for taking measures, in order to reduce the VOC emissions resulting from the use of their products. Therefore, product characterisation and information about the influence of environmental parameters on the VOC emissions are fundamental for providing the basic scientific information required to allow architects, engineers, builders, and building owners to provide a healthy environment for building occupants. On the other hand, the producers of coating building materials require this information to introduce technological alterations, when necessary, in order to improve the ecological quality of their products, and to make them more competitive. Studies of VOC emissions from wet materials, like paints and varnishes, have usually been conducted after applying the material on inert substrates, due to its non-adsorption and non-porosity properties. However, in real indoor environments, these materials are applied on substrates of a different nature. One aim of this work was to study, for the first time, the VOC emissions from a latex paint applied on concrete. The influence of the substrate (uncoated cork parquet, eucalyptus parquet without finishing and pine parquet with finishing) on the emissions of VOC from a water-based varnish was also studied. For comparison purposes, polyester film (an inert substrate) was used for both wet materials. METHODS: The specific emission rates of the major VOCs were monitored for the first 72 h of material exposure in the atmosphere of a standardized test chamber. The air samples were collected on Tenax TA and analysed using thermal desorption online with gas chromatography provided with both mass selective detection and flame ionisation detection. A double exponential model was applied to the VOC concentrations as a function of time to facilitate the interpretation of the results. RESULTS AND DISCUSSION: The varnish, which was introduced in the test chamber 23 h after the application of the last layer of material, emitted mainly glycolethers. Only primary VOCs were emitted, but their concentrations varied markedly with the nature of the substrate. The higher VOC concentrations were observed for the parquets of cork and eucalyptus, which indicated that they have a much higher porosity and, therefore, a higher power of VOC adsorption than the finished pine parquet (and polyester film). The paint was introduced in the chamber just after its application. Only primary VOCs were emitted (esters, phthalates, glycolethers and white spirit) but some compounds, like 2-(2-butoxyethoxy)ethanol and diethylphthalate, were only observed for paint/polyester, which suggested that they were irreversibly adsorbed by the paint/concrete. Compared with the inert substrate, the rate of VOC emissions was lower for concrete in the wet-stage (first hours after the paint application) but slightly higher later (dry-stage) as a consequence of desorption. CONCLUSIONS: As to varnish, the substrates without finishing, like cork and eucalyptus parquets, displayed a higher power of adsorption of VOCs than the pine parquet with finishing, probably because they have a higher porosity. As concerns paint, the total masses of VOCs emitted were lower for concrete than for polyester, indicating that concrete reduces the global VOC emissions from the latex paint. Concrete is seen to have a strong power of adsorption of VOCs. Some compounds, namely 2-(2-butoxyethoxy)ethanol, diethylphthalate and TEXANOL (this partially), were either irreversibly adsorbed by the concrete or desorbed very slowly (at undetected levels). A similar behaviour had not been reported for gypsum board, a paint substrate studied before. RECOMMENDATIONS AND OUTLOOK: The present data suggest that concrete may be a recommendable substrate for paint in an indoor environment. As the nature of the substrate conditions the rate and nature of VOC emissions from wet materials, it must be explicit when emissions from composite materials are reported, in order to allow comparisons and labelling of the product in terms of indoor air quality.     

Physical and chemical characterisation of metal finishing industrial wastes

In EU countries approximately 150,000 tons/year of galvanic sludges are generated by 4000 industrial units from the corresponding wastewater treatment plants. These sludges are generally classified as hazardous (European Waste Catalogue as adopted in Council Decision 2000/532/CE and as amended by Decisions 2001/118/EC, 2001/119/EC and 2001/573/CE), basically due to the presence of heavy metals. This work attempts to better understand the physical and chemical characteristics of these sludges, by studying 39 samples collected in different Portuguese industries that should represent all kinds of similar wastes independent of their place of generation. Chemical composition and leaching characteristics are given, together with density, grain size distribution, and specific surface area values. Statistical analysis was used for grouping the wastes according to chemical parameters, which might be useful to predict potential reuse as raw materials for different applications.     

Production and biomass accumulation of periphytic diatoms growing on glass slides during a 1-year cycle in a subtropical estuarine environment (Bay of Paranaguá, southern Brazil)

Production rates, chlorophyll concentrations and general composition of periphytic diatom communities growing on glass slides were studied in relation to environmental parameters during one seasonal cycle in the Bay of Paranaguá, southern Brazil. Slides were routinely submersed at 1, 2 and 3 m depth and recovered weekly for microscopic examinations, analyses of chlorophyll, cell counts and in situ photosynthetic incubations using the Winkler titration method. Water samples were also collected at surface and bottom layers for determinations of temperature, salinity, nutrients and chlorophyll in the water. The periphytic community was mainly formed by epipelic and epipsammic species, dominated by Navicula phyllepta, Cylindrotheca closterium, Navicula spp. and Amphora sp. Weekly chlorophyll a and cell accumulations on slides varied from <1–32 mg m⁻² and up to 31 × 10⁸cells m⁻², respectively. Photosynthetic rates varied from <1 to 35 mg oxygen mg chlorophyll a ⁻¹ h⁻¹, with higher values in summer. Daily production varied from 5 to 3,600 mg oxygen m⁻² day⁻¹ (<0.01–1.4 g carbon m⁻² day⁻¹). Multiple regression analysis revealed that vertical differences in light conditions and grazing pressure jointly affected the influence of temperature on the seasonal patterns of cell densities and chlorophyll concentrations according to depth. Received: 27 April 2000 / Accepted: 16 August 2000     

Growth,mortality and disease susceptibility of oyster<Emphasis Type="Italic"> Ostrea edulis</Emphasis> families obtained from brood stocks of different geographical origins,through on-growing in the Ría de Arousa (Galicia,NW Spain)

Infection by Bonamia ostreae has caused extensive mortalities of oysters Ostrea edulis through European and United States coasts for at least 25 years. The development of a bonamiosis-resistant strain seems a promising strategy to fight against the disease. As a first step, evaluation of variability in productive traits and disease susceptibility of European populations was performed to identify favourable oyster populations with which to start selective breeding in Galicia (NW Spain). Oysters taken from Greece, Ireland, Ortigueira (Galicia) and Coroso (Galicia) were used as brood stock, and 19 seed families were produced (4–5 families from each origin). The oyster families were used to assess variability through on-growing in an area of the Ría de Arousa heavily affected by bonamiosis. Results showed significant differences in growth, mortality and susceptibility to bonamiosis and other diseases, both between origins and between families under origins. Bonamiosis was associated with mortality in the late stage of oyster on-growing. Indications of natural selection of bonamiosis less-susceptible oysters due to the long exposure of the Ortigueira population to bonamiosis were found. Other symbionts and pathological conditions were detected, of which herpes-like viral infections and disseminated neoplasia could also cause mortality. An index of the overall incidence of pathological conditions (OIPC) was estimated for each family. A significant correlation between the OIPC and the cumulative mortality of the families was noted. On average, oysters from autochthonous origins showed better performance. The results obtained with the best-performing families suggest that the profitability of oyster farming in Galicia would improve, even under bonamiosis pressure, by using appropriate oyster spat.Communicated by S.A. Poulet, Roscoff     

加勒比地区的生态旅游 : 莫失良机

注意保护自然与文化资源 , 生态旅游就能够产生收益 , 在保护地和偏远农村地区更是如此 .本 文集中论述了为使旅游产业更具有可持续性 , 在加勒比地区 ( 例如伯利兹、博奈尔岛、圣卢 西亚、开曼群岛、古巴和委内瑞拉 ) 所采取的一些积极措施 .     

斯里兰卡梅迪里吉里亚的社区生态旅游计划——保护与开发相结合

斯里兰卡政府推动社区生态旅游业发展 , 把它作为农村地区可持续性的保护手段和开发途径 . 梅迪里吉里亚 (Medirigiriya)社区生态旅游计划 , 是一项保护与开发相结合的综合性地方 政府社区工程 . 本文所介绍的梅迪里吉里亚示范计划 , 属于获得斯里兰卡政府支持的第一批 可持续性旅游开发试验计划之一 .     

Application of geostatistical methods to arsenic data from soil samples of the Cova dos Mouros mine (Vila Verde-Portugal)

A total of 286 soil samples were collected in the Cova dos Mouros area. All samples were dry sieved into the <200 mesh size fraction and analysed for Fe, Cu, Zn, Pb, Co, Ni, Bi and Mn by atomic absorption spectrometry (AAS) and for As, Se, Sb and Te by atomic absorption spectrometry-hydrid generation (AAS-HG). Only the results of arsenic are discussed in this paper although the survey was extended to all analysed chemical elements. The purpose of this study was to make a risk probability mapping for arsenic that would allow better knowledge about the vulnerability of the soil to arsenic contamination. To achieve this purpose, the initial variable was transformed into an indicator variable using as thresholds the risk-based standards (intervention values) for soils, as proposed by [Swartjes 1999. Risk based assessment of soil and groundwater quality in the Netherlands: Standards and remediation. J. Geochem. Explor.73 1–10]. To account for spatial structure, sample variograms were computed for the main directions of the sampling grid and a spherical model was fitted to each sample variogram (arsenic variable and indicator variables). The parameters of the spherical model fitted to the arsenic variable were used to predict arsenic concentrations at unsampled locations. A risk probability mapping was also done to assess the vulnerability of the soil towards the mining works. The parameters of the spherical model fitted to each indicator variable were used to estimate probabilities of exceeding the corresponding threshold. The use of indicator kriging as an alternative to ordinary kriging for the soil data of Cova dos Mouros produced unbiased probability maps that allowed assessment of the quality of the soil.     

Use of oxytetracycline and tylosin in intensive calf farming: evaluation of transfer to manure and soil

Antibiotics may enter soils with manure from treated animals. Because of their biological effects, antibiotics are regarded as potential micropollutants. The levels of oxytetracycline and tylosin over time were followed in faeces, bedding and manure, and then in the soil of a manured field and surrounding drainage courses, after oral treatment of calves. Fifty Simmental calves were treated for 5 days with 60 mg/kg/day of oxytetracycline. After 15 days the animals were treated for 5 days with 20 mg/kg/day of tylosin. Tylosin degraded rapidly, and was no longer detected in manure 45 days after cessation of treatment and no trace of the compound was detected in soil or surrounding water (detection limits 10 microg/l). The half-life of oxytetracycline in manure was 30 days and the compound was still detectable in this matrix (820 microg/kg) after 5 months maturation. In the manured soil oxytetracycline was detected at concentrations at least 10 times lower than the European Agency for the Evaluation of Medicinal Products threshold (100 microg/kg) requiring phase II environmental risk assessment. Oxytetracycline was not detected in the water courses (detection limit 1 microg/l). These results demonstrate that the processes occurring between faeces production and application of manure to the soil are very effective in reducing the load of TYL and OTC in the environment. For both drugs a toxicity test was performed using the alga Selenastrum capricornutum. The EC50 was 4.18 mg/l for oxytetracycline and 0.95 mg/l for tylosin. A worst-case hazard assessment for the aquatic environment was performed comparing the ratio between the measured concentrations (LOD) and effect data from previous work (OTC) or from this work (TYL). This showed ratio between toxicity levels (bacteria) (EC50=0.14 mg/l) and measured concentrations (LOD=1 microg/l) for OTC to be 140. The corresponding value for TYL (LOD=10 microg/l) was 95.     

A pest is a pest is a pest? The dilemma of neotropical leaf-cutting ants: Keystone taxa of natural ecosystems

Leaf-cutting ants of the generaAcromyrmex andAtta are considered the principal polyphagous pests of the Neotropics Although some members of these genera are of economic importance, have a broad geographic distribution, and are extremely good colonizers, others are endemic and closely interact with native ecosystems. Control is generally practiced against any colony, irrespective of its taxonomic status. Indiscriminate control coupled with habitat destruction threatens endemic species with extinction, and, through habitat simplification, favors other pest species. As nests ofAtta are large, having several square meters of nest surface, the endemic taxa can be easily used as environmental indicators for natural ecosystems Likewise, the pest species can be used to detect environmental disturbance As these ants are keystone species and easily identified by nonspecialists, efforts should be made to integrate these into viable conservation programs