Monitoring of ozone effects on the vitality and increment of Norway spruce and European beech in the Central European forests

The ozone effect on Norway spruce (Picea abies (L) Karst.) and European beech (Fagus sylvatica L.) was studied on 48 monitoring plots in 2005-2008. These plots represent two major forest tree species stands of different ages in eight regions of the Czech Republic. The forest conditions were represented by defoliation and the annual radial increment of individual trees. The ozone exposure was assessed by using modeled values of mean annual O(3) concentration and the AOT40 index. The malondialdehyde (MDA) content of the foliage was analysed and used as an indicator of oxidative stress. The correlation analysis showed a significant relation of Norway spruce defoliation to the AOT40 exposure index, and European beech defoliation to the MDA level. The radial increment response to ozone was significant only for the European beech: (a) the correlation analysis showed its decrease with increasing AOT40; (b) the regression model showed its decrease with increasing mean annual ozone concentration only at lower altitudes (<700 m a.s.l.).     

Apportionment of the airborne PM10 in Spain. Episodes of potential negative impact for human health

The particulate matter with an aerodynamic diameter less than or equal to 10 and 2.5 microns respectively (PM10 and PM2.5) constitutes one of the main air pollutants, which is currently regulated in Europe through Directive 2008/50/EC due to its proven harmful effects on human health. In this paper, the airborne PM10 samples collected in Zaragoza city during 2001-2009 were apportioned by statistical tools based on principal component analysis with absolute principal component scores (PCA-APCS). PM10 samples were characterized regarding their concentrations of polycyclic aromatic hydrocarbons (PAH) and water-soluble ions. PAH were analyzed by gas chromatography-mass spectrometry-mass spectrometry detection (GC-MS-MS) and ions were analyzed by ion chromatography. A total of five factors were identified by PCA-APCS corresponding to different anthropogenic and natural sources. This work was focused on analyzing in more detail those samples involving higher negative impact on human health, in particular, PM10 samples exceeding the daily PM10 limit value of 50 μg m(-3) according to Directive 2008/50/EC and samples with concentrations of benzo[a]pyrene (BaP) higher than the upper assessment threshold (BaP > 0.6 ng m(-3)) established by the Directive 2004/107/EC. Most of the exceedances of the daily PM10 limit value were associated with direct and indirect North-African long-range transport. During these exceedances, it was observed that anthropogenic pollution sources slightly decreased with regard to the natural sources. This indicated that episodes of high PM10 could have a natural origin associated with long-range transport from the African continent. On the contrary, those exceedances with regional contribution and samples with BaP concentrations higher than 0.6 ng m(-3) showed an important contribution of anthropogenic pollution sources increasing their negative impact on human health.     

Investigations of mercury concentrations in walleye and other fish in the Athabasca River ecosystem with increasing oil sands developments

Recent studies have reported an increasing trend of mercury concentrations in walleye (Sander vitreus) from the Athabasca River, north eastern Alberta (Canada); these studies were based on three years of comparison and attributed the mercury increase to expanding oil sands developments in the region. In order to conduct a more comprehensive analysis of mercury trends in fish, we compiled an extensive database for walleye, lake whitefish (Coregonus clupeaformis), northern pike (Esox lucius) and lake trout (Salvelinus namaycush) using all available data obtained from provincial, federal, and industry-funded monitoring and other programs. Evidence for increasing trends in mercury concentrations were examined for each species by location and year also considering fish weight and length. In the immediate oil sands area of the Athabasca River, mercury concentrations decreased (p < 0.001) in walleye and lake whitefish over 1984-2011. In western Lake Athabasca and its delta, mercury concentrations decreased (p < 0.0001) in northern pike (1981-2009) although no trend was evident for walleye (1981-2005) and lake trout (1978-2009). Mercury concentrations in lake trout from Namur Lake, a small lake west of the oil sands area, were higher in 2007 than 2000 (p < 0.0001); it is difficult to ascribe this increase to an oil sands impact because similar increases in mercury concentrations have been observed in lake trout from similar sized lakes in the Northwest Territories. While mercury emissions rates have increased with oil sands development and the landscape become more disturbed, mercury concentrations remained low in water and sediments in the Athabasca River and its tributaries and similar to concentrations observed outside the development areas and in earlier decades. Our fish database was assembled from a series of studies that differed in study purpose, design, and analytical methods. Future monitoring programs investigating mercury trends in fish should be more rigorous in their design.     

Statistical modeling of crystalline silica exposure by trade in the construction industry using a database compiled from the literature

A quantitative determinants-of-exposure analysis of respirable crystalline silica (RCS) levels in the construction industry was performed using a database compiled from an extensive literature review. Statistical models were developed to predict work-shift exposure levels by trade. Monte Carlo simulation was used to recreate exposures derived from summarized measurements which were combined with single measurements for analysis. Modeling was performed using Tobit models within a multimodel inference framework, with year, sampling duration, type of environment, project purpose, project type, sampling strategy and use of exposure controls as potential predictors. 1346 RCS measurements were included in the analysis, of which 318 were non-detects and 228 were simulated from summary statistics. The model containing all the variables explained 22% of total variability. Apart from trade, sampling duration, year and strategy were the most influential predictors of RCS levels. The use of exposure controls was associated with an average decrease of 19% in exposure levels compared to none, and increased concentrations were found for industrial, demolition and renovation projects. Predicted geometric means for year 1999 were the highest for drilling rig operators (0.238 mg m(-3)) and tunnel construction workers (0.224 mg m(-3)), while the estimated exceedance fraction of the ACGIH TLV by trade ranged from 47% to 91%. The predicted geometric means in this study indicated important overexposure compared to the TLV. However, the low proportion of variability explained by the models suggests that the construction trade is only a moderate predictor of work-shift exposure levels. The impact of the different tasks performed during a work shift should also be assessed to provide better management and control of RCS exposure levels on construction sites.     

Attribution of Carbon Dioxide Fluxes to Crop Types in a Heterogeneous Agricultural Landscape of Argentina

The increasing proportion of agricultural lands worldwide makes it necessary to intensify the research concerning the carbon exchange at agricultural sites. In order to determine the Net Ecosystem Exchange (NEE) in an agricultural landscape in the province of Buenos Aires, Argentina, we carried out eddy covariance measurements with a flux tower, which was placed between two agricultural fields. Therefore, the measured CO₂ flux represents the accumulated flux from both areas, i.e., from different crop types. We here present an analysis method which attributes the flux to the two crop types. For this analysis, we applied the Hsieh footprint model to identify the contributing source area to the flux measurement. We then applied a multiple regression analysis to calculate the NEE in the growing season 2011/2012 for each field separately. The pronounced differences in the time courses of the CO₂ fluxes in the two fields can be explained by the different sowing times and different growth stages of both cultivations. The time courses furthermore show that the CO₂ uptake of the plants was strongly affected by the drought which lasted from December 2011 to January 2012. For the growth cycle of maize (216 days), the NEE was ?240 g C m^?2 and for the growth cycle of soybean (154 days) ?231 g C m^?2. In order to obtain the NEE of a complete agricultural cycle (from harvest to harvest), we also considered the NEE of autumn and winter 2011. Uncertainties of the spatially partitioned NEE are quantified and discussed.     

Adjusting the effect of seasonal variability in the bioassessment of streams

Bioassessment tools should distinguish between the effects of anthropogenic degradation in communities and natural temporal changes. The present study tests the influence of natural seasonal variability on macroinvertebrate stream communities assessed by a predictive model (PORTRIV) and a multimetric index (IPtI) calibrated for spring. The scores of PORTRIV decreased significantly between spring and autumn, and between spring and winter (ca. 37 to 53 %, respectively), while those of IPtI did not change significantly between seasons. For non-reference samples, the results of the predictive model also indicate no significant differences. A correction factor (CF) was calculated to adjust the existing differences in the model assessments between seasons, based on the percentage of variation of reference site scores from spring to autumn and winter. After the application of the CF to the OE50 scores of spring reference samples, the differences were no longer significant. Independent reference validation sites confirmed this tendency. This method has the advantage of avoiding large efforts required for the construction of databases from other seasons and the development of new models to allow the assessment of streams in seasons other than spring. Further tests with models developed in regions with more marked seasonal changes should be done to confirm its wider applicability.     

Micromorphology and chemistry of airborne particles in Brussels during agriculture working periods in surrounding region

The main objective of our research was to compare the airborne particle micromorphology and chemistry in the Brussels environment during agriculture working periods in the surrounding farming region. We used specific methods and instrumentation that are adapted to the climate peculiarities of the Brussels region, the period of investigations (12 months) and the proposed objectives. For the agricultural works we defined the following six periods: before sowing, sowing, after sowing, before harvest, harvest and after harvest. The results indicate a possible temporal correlation between agricultural work periods and airborne particle concentration, micromorphology and chemistry in the Brabant-Brussels region. For wheat and corn plant-growth periods, the average particle size, defined as the area obtained by a planar projection of the particulate, showed important variations in time. For sugar beet and endive, the average area size variations are less important. The roughness and sphericity parameters for the growth periods of the four different plants also showed significant differences. Many of the larger particulates (> 10 microm) are aggregates of even finer particles coated with many still finer ones. The airborne particle chemistry averages (atomic percentage At%), showed that three constituents (Si, S and Fe) dominate all the samples (except for particles 3-10 microm in size, which contain a relatively large percentage of Al). Applying similar investigation methods to study the correlations between airborne particle dynamics in urban zones and the agriculture working periods in their surrounding regions could be of interest to better understand the complexity of the PM problematic.     

Assessing reliable indicators to sewage pollution in coastal soft-bottom communities

Physicochemical characteristics of sediment and benthic communities were studied in the proximity of seven sewage outfalls with differences in flow and wastewater treatment in the Western Mediterranean Sea. Redox potential was the only abiotic parameter which showed a pattern related with distance to outfalls, whereas granulometry, percentage of organic matter, metal concentrations or pH did not show changes related with outfall presence. Benthic community analysis proved to be the most suitable monitoring tool. The results showed that the highest impacted stations corresponded with those closest to outfall with the highest flow and only pre-treatment, whilst a decrease of this tendency was detected in the locations where secondary treatment takes place. Meta-analysis showed a decrease of amphipods and tanaids abundance as well as redox potential, as the indicators with the clearest response to sewage presence.