Bait-lamina assay as a tool to assess the effects of metal contamination in the feeding activity of soil invertebrates within a uranium mine area

As part of the tier 2 of a site-specific risk assessment, this study was the first reporting an intensive in situ application of the bait-lamina assay; two exposure periods (7 and 14 days) were tested during four seasons in ten different sites, within a uranium mine area and at two different depths. The most contaminated sites (by deposition of sludge from the effluent treatment pond) were discriminated after 14 days of exposure because extremely low percentages of feeding activity were recorded. Previous sub-lethal ecotoxicological assays, already had demonstrated that the habitat function of these soils is compromised. Nevertheless, seasonality has proved to have a significant influence on responses. Thus to strength conclusions about the impact of contaminants, the in situ bait-lamina assay should be performed on different annual seasons, at least for temperate regions. It was also found that some environmental parameters (e.g. soil moisture and litter) can act as confounding factors in the bait-lamina assay.     

Analysis and modelling of the pollutant emissions from European cars regarding the driving characteristics and test cycles

Within the European research project ARTEMIS, significant works have been conducted to analyse the hot emissions of pollutant from the passenger cars regarding the driving cycles and to propose modelling approaches taking into account large but heterogeneous datasets recorded in Europe. The review and analysis of a large range of test cycles enabled first the building-up of a set of contrasted cycles specifically designed for characterizing the influence of the driving conditions. These cycles were used for the measurement of the pollutants emission rates from nine passenger cars on a chassis dynamometer.Emissions measured on 30 vehicles tested on cycles adapted to their motorization (i.e., cycles for high- or low-powered cars, inducing thus a significant difference in the dynamic) were also considered for analysing the influence of the cycles and of the kinematic parameters on the hot emission rates of the regulated pollutants (CO, HC, NO_x, CO₂, PM). An analyses of variance demonstrated the preponderance of the driving type (urban, rural road, motorway), of the vehicle category (fuel, emission standard) and emitting status (high/normal emitter) and thus the pertinence of analysing and modelling separately the corresponding emissions. It also demonstrated that Urban driving led systematically to high diesel emission rates and to high CO₂, HC and NO_x emissions from petrol cars. Congested driving implied high CO₂ (diesel and petrol) and high diesel NO_x emission. On motorway, the very high speeds generated high CO₂, while unsteady speeds induced diesel NO_x and petrol CO over-emissions. A search for pertinent kinematic parameters showed that urban diesel emissions were mostly sensitive to stops and speed parameters, while petrol emissions were rather sensitive to acceleration parameters. On the motorway, diesel NO_x and CO₂ emissions rates increased with the speed variability and occurrence of high speeds, while CO₂ and CO over-emission from petrol cars were linked to the occurrence of strong acceleration at high speeds.A modelling approach based on partial least square regression was tested, which demonstrates its ability to discriminate satisfactorily the emissions according to dynamic related parameters and in particular when considering the two-dimensionnal distribution of instantaneous speed and acceleration.Finally, a strategy was proposed to analyse the large but heterogeneous set of hot emission data collected within the ARTEMIS project. The approach consisted in analysing the similarity of the numerous cycles as regards their kinematic, grouping them into reference test patterns through an automatic clustering, and then computing reference emissions for these patterns. These principles enabled the development of a method to compute the emissions at a low spatial scale, i.e. the so-called traffic situation approach, which was implemented in the European Artemis model for estimating the cars’ pollutant emissions.     

Non-destructive quantification of water gradient in sludge composting with Magnetic Resonance Imaging

Sludge from a slaughter-house wastewater plant, and mixtures of bulking agent (crushed wood pallet) and sludge were studied by Nuclear Magnetic Resonance (NMR). The NMR spin–spin relaxation (T₂) and spin–lattice relaxation (T₁) signals for sludge, wet crushed wood pallet and mixtures of sludge and bulking agent were decomposed into three relaxation time components. Each relaxation time component was explained by a non-homogeneous water distribution on a microscopic length scale and by the porosity of the material. For all samples, the T₂ relaxation time value of each component was directly related to the dry matter content. The addition of wet crushed wood to sludge induced a decrease in the relaxation time, explained by water transfer between the sludge and the wood.Magnetic Resonance Imaging (MRI) and respirometric measurements were performed on sludge and wood mixtures. MR images of the mixtures were successfully obtained at different biodegradation states. Based on specific NMR measurements in an identified area located in the MRI cells, the results showed that grey levels of MR images reflected dry matter content. This preliminary study showed that MRI would be a powerful tool to measure water distribution in sludge and bulking agent mixtures and highlights the potential of this technique to increase the understanding of sludge composting.     

Expansion of Calamagrostis villosa in sub-alpine Nardus stricta grassland: Cessation of cutting management or high nitrogen deposition?

Calamagrostis villosa has recently expanded in Nardus stricta-dominated sub-alpine grassland of the Giant Mountains (Krkono?e/Karkonosze, the Czech Republic). To investigate whether this expansion has been promoted by high nitrogen deposition or by the cessation of agricultural management, grassland plots dominated by C. villosa were manipulated with four treatments: control (Con), fertilised (Fer), cut (Cut) and cut–fertilised (Cut–Fer). NH₄NO₃ was used at the rate of 30 kg N ha^?1 and fertilisation and cutting were performed once a year after data collection in late July between 2000 and 2006.Plant species composition (analysed by RDA) was significantly influenced by cutting but not by fertilisation. Cutting reduced the cover, biomass, sward height and tiller density of C. villosa. Seedlings of N. stricta and panicles of C. villosa were recorded only in plots with cutting management.To investigate the effect of treatments on the spread of C. villosa, grassland sods dominated by N. stricta were transplanted into the experimental plots. Six years later, the density and cover of C. villosa spreading into the N. stricta sods were highest in Fer treatment.C. villosa was recognised as a defoliation-sensitive species and this sensitivity cannot be overcome by an increase in N supply. Recent expansion of C. villosa in the sub-alpine grassland can by explained by a long-term succession after the cessation of agricultural management and an increase in the N availability in recent decades.     

Pilot study for the neonatal screening of fragile X syndrome

An Erratum has been published for this article in Prenatal Diagnosis 23 (9), 2003, 771. Fragile X syndrome (SFX) is the commonest form of inherited mental retardation. Due to the highly variable phenotype clinical diagnosis is complicated. In nearly all cases, the disorder is caused by expansion of a CGG-repeat in the 5′-untranslated region of the FMR1 (fragile X mental retardation-1) gene. We have evaluated the feasibility, efficiency and costs of two methodologies in order to develop a simple test to screen large populations: PCR and fragile X mental retardation-1 protein (FMRP) immunodetection. We studied 100 newborn males using PCR and immunodetection (26.91 Euro). All but one amplified the CGG repeat of the FMR1 gene within the normal size range. The sample that failed to amplify showed only 28% of FMRP expression by immunodetection study; both results indicated an affected male. A further 100 males were studied only by polymerase chain reaction (PCR) (7.8 Euro); all of them amplified within the normal size range. Both methodologies, PCR and immunodetection, are feasible for screening large populations, PCR being the most suitable, economical and less time-consuming. However, it is advisable to keep slides for immunodetection when PCR fails or the external control shows no amplification. Early detection of SFX-affected individuals would represent a great benefit for their maximum social integration, due to appropriate treatment and early stimulation and would permit a cascade screening in their pedigree. Copyright © 2002 John Wiley & Sons, Ltd.     

Y chromosome detection by Real Time PCR and pyrophosphorolysis-activated polymerisation using free fetal DNA isolated from maternal plasma

Objectives To validate the use of Real Time PCR, a widely used technique that can detect very low levels of Y chromosomal sequence, and to assess the use of a highly sensitive PCR technique, pyrophosphorolysis-activated polymerisation (PAP), for fetal sex determination using free fetal DNA (ffDNA). Methods The fetal sex was determined by Real Time PCR in 58 pregnancies using ffDNA isolated from maternal plasma. In parallel with the Real Time PCR experiments, the presence of Y chromosome sequence was also determined using PAP on 54 isolated ffDNA samples. Results Both techniques detected Y chromosome sequence at very low levels with 98% specificity and 100% sensitivity (Real Time n = 44, PAP n = 54). Furthermore, the PAP technique was shown to be more robust than the Real Time PCR as none of the samples tested failed to meet the acceptance criteria. Combining the two techniques for male fetal sex detection from maternal blood plasma increases the sensitivity and specificity to 100% in this series. Conclusions This study shows that both Real Time PCR and PAP can be used for Y chromosome detection on ffDNA. Furthermore, by using PAP in combination with Real Time PCR more reliable early prenatal sexing can be performed using ffDNA. Copyright © 2007 John Wiley & Sons, Ltd.