Inclusion complexes of alpha- and gamma-cyclodextrins and the herbicide norflurazon: I. Preparation and characterisation. II. Enhanced solubilisation and removal from soils

The interaction of norflurazon with alpha- and gamma-cyclodextrins (CDs) yielded the formation of inclusion complexes at a 1:1 stoichiometric ratio in solution and in the solid state. Apparent stability constants of 50.7+/-1.6 and 37+/-1.7 M(-1) and an increase in herbicide solubility by up to five and fourfold for alpha- and gamma-CD, respectively, were determined from the phase solubility diagrams at 25 degrees C in water. Three processing methods (kneading, spray-drying and vacuum evaporation) were used to prepare norflurazon-CD solid inclusion complexes, which were characterised by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. A high increase in the norflurazon dissolution rate was obtained with all the solid complexes with gamma-CD, but when alpha-CD was used, only the solid system obtained after the vacuum evaporation process showed a higher dissolution rate. This finding is a first step in the development of new, environmentally sound formulations of norflurazon (NFL), due to the capacity for increasing its dissolution rate and hydrosolubility, and thus diminishing the use of organic solvents. On the other hand, the effect of alpha- and gamma-cyclodextrin on the solubility of norflurazon in solution was also considered as a way of modifying its behaviour in the soil environment. Desorption studies of NFL from soils in the presence of alpha- and gamma-cyclodextrin were carried out using a batch equilibration method. The results obtained showed that alpha- and gamma-cyclodextrin greatly increased the removal of norflurazon previously adsorbed, proving the potential use of these CDs for in situ remediation of pesticide-contaminated soils.     

Use of the aquatic lichen Dermatocarpon luridum as bioindicator of copper pollution: accumulation and cellular distribution tests

Laboratory experiments were conducted to investigate the potential use of the aquatic lichen Dermatocarpon luridum as bioindicator of copper pollution. Lichen thalli were exposed to 0.00, 0.25, 0.50, 0.75 and 1.00 mM copper in synthetic freshwater to solve the problems of metal bioavailability. The mineral composition of this media was prepared so that it corresponded to the ion composition of natural waters in D. luridum ecosystems. Sequential elution procedures using NiCl2 or Na2-EDTA (20 mM) were used to determine the distribution of metals at different cellular sites. The copper concentration extracted from thalli was correlated with pollution intensity, the greater correlation being with the Na2-EDTA extractant. The malondialdehyde concentration in thalli can be used as indicator of copper pollution; however, similar membrane degradation was observed for 0.25 and 0.50 mM copper and for 0.75 and 1.00 mM copper.     

Antifungal and anti-aflatoxigenic activity of Heliopsis longipes roots and affinin/spilanthol against Aspergillus parasiticus by downregulating the expression of alfD and aflR genes of the aflatoxins biosynthetic pathway

Abstract

In the present study, ethanolic extract from Heliopsis longipes roots and affinin/spilanthol against Aspergillus parasiticus growth and aflatoxins production were studied in relation to the expression of aflD and aflR, two key genes of aflatoxins biosynthetic pathway. Phytochemical analysis of the ethanolic extract by GC-EIMS identified affinin/spilanthol (7.84?±?0.27?mg g^?1) as the most abundant compounds in H. longipes roots. The antifungal and anti-aflatoxigenic assays showed that affinin/spilanthol at 300?µg mL^?1 produced the higher inhibition of radial growth (95%), as well as, the higher aflatoxins production inhibition (61%) in comparison to H. longipes roots (87% and 48%, respectively). qRT-PCR revealed that the expression of aflD and aflR genes showed a higher downregulation in affinin/spilanthol at 300?µg mL^?1. The expression ratio of alfD was suppressed by affinin/spilanthol in 79% and aflR in 84%, while, a lower expression ratio suppressed by H. longipes was obtained, alfD (55%) and aflR (59%). Affinin/spilanthol possesses higher antifungal and anti-aflatoxigenic activity against A. parasiticus rather than H. longipes roots, and this anti-aflaxotigenic activity occurring via downregulation of the aflD and aflR genes. Thus, H. longipes roots and affinin/spilanthol can be considered potent antifungal agents against aflatoxigenic fungus, especially, affinin/spilanthol.     

The economic benefits of fulfilling the World Health Organization’s limits for particulates: A case study in Algeciras Bay (Spain)

Algeciras Bay is an important industrial and port zone in the south of Spain whose pollution by particulate matter surpasses the threshold levels recommended by the World Health Organization (WHO) in its 2005 Guide on Air Quality. This study analyses the mortality avoided and the economic benefit which would be derived from a reduction of the pollution of PM2.5 and PM10 to the levels recommended by the WHO in Algeciras Bay in the period 2005-2015. The analysis carried out shows that the industrial zones, such as Los Barrios and San Roque, are those which have greater levels of pollution and in which the relative risk is greater. The calculations for Algeciras Bay between 2000 and 2015 show 182 deaths which would be avoided if the particulate matter pollution were reduced to the levels recommended by the WHO. Likewise, the economic valuation which this impact has on health is carried out through two concepts: the cost of illness and the Value of Statistical Life (VSL). The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the VSL is 414,787,113€.

Implications: PM_2.5 has a greater concentration in industrial localities and is linked to the industrial activity. When the particulate matter pollution is reduced to the levels recommended by the WHO in an industrialised area such as Algeciras (Spain), 182 deaths which would be avoided. The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the value of statistical life is 414,787,113€.     

Plasma ALP activity and blood PCV value changes in chick fetuses due to exposure of the egg to different xenobiotics

The effects of two polycyclic aromatic hydrocarbon (PAH) compounds (benz(k)fluoranthene and fluoranthene) and two heavy metals (cadmium and lead) were studied on the alkaline phosphatase (ALP) enzyme activity and hematocrit (PCV) values in chick fetuses. Eggs were exposed to one of the four compounds before incubation, by applying two exposure methods: injection (into the air cell) or immersion. Fluoranthene, cadmium and lead injection significantly decreased ALP activity compared to the control, while none of the compounds caused significant reduction in ALP activity in the immersion groups; however, a decreasing tendency was seen in these groups as well. Hematocrit values were increased after benz(k)fluoranthene immersion, fluoranthene immersion and cadmium injection. However, the doses in this study are relatively low (compared to other ecotoxicological studies in birds), the alteration in ALP enzyme activity and PCV values was apparent in each treatment group and is indicative of the high sensitivity of chick fetuses.     

Chemical and bacterial changes during laboratory conditioning of formulated and natural sediments

Within the framework of toxicity testing using formulated sediment, a conditioning treatment prior to toxic contamination has been examined. This preliminary step enables the bacterial colonisation of the sediment, the initiation of organic matter degradation, and the establishment of stable biological and physico-chemical conditions. The treatment involved in keeping the formulated sediment under water in conditions similar to that chosen for toxicity tests. The behaviour of a formulated sediment was compared with a natural sediment. The monitoring of physico-chemical and biological parameters of sediment and water column was carried out over a 30-day incubation in two laboratories. The parameters of pH and redox, dissolved organic carbon (DOC), NH4 and NO2, total organic carbon (TOC) were measured. The bacterial community was characterised by the determination of bacterial density, in total bacteria number or colony forming units (CFU), several exoenzymatic activities (P-glucosidase, xylosidase, leucine-amino-peptidase phosphatase and sulfatase activities), and three gas productions (CO2, N2O and CH4). The same experiment was carried out with a natural sediment. A 10- to 15-day conditioning allowed a physico-chemical stabilisation and corresponded to kinetic changes in hydrolysis activities. As compared to data of the natural sediment, the biological activity of the formulated sediment showed a different dynamic with lower activity levels. For both sediments, an important decrease of activities levels was observed after 15 days because of a substrate limitation. The work showed that a preliminary conditioning treatment of a formulated sediment provides the stabilisation of parameters that can affect toxicant bioavailability. Additional research is needed to determine the real influence of conditioning on the bioavailability of contaminants. The possible advisability of organic matter input, to maintain the sediment bacterial activity, has to be studied.     

Heavy metal extractable forms in sludge from wastewater treatment plants

The analysis of heavy metals is a very important task to assess the potential environmental and health risk associated with the sludge coming from wastewater treatment plants (WWTPs). However, it is widely accepted that the determination of total elements does not give an accurate estimation of the potential environmental impact. So, it is necessary to apply sequential extraction techniques to obtain a suitable information about their bioavailability or toxicity. In this paper, a sequential extraction scheme according to the BCR's guidelines was applied to sludge samples collected from each sludge treatment step of five municipal activated sludge plants. Al. Cd, Co, Cu, Cr, Fe, Mn, Hg, Mo, Ni, Pb, Ti and Zn were determined in the sludge extracts by inductively coupled plasma atomic emission spectrometry. In relation to current international legislation for the use of sludge for agricultural purposes none of metal concentrations exceeded maximum permitted levels. In most of the metal elements under considerations, results showed a clear rise along the sludge treatment in the proportion of two less-available fractions (oxidizable metal and residual metal).     

Priority assessment of toxic substances in life cycle assessment. Part I: calculation of toxicity potentials for 181 substances with the nested multi-media fate, exposure and effects model USES-LCA

Toxicity potentials are standard values used in life cycle assessment (LCA) to enable a comparison of toxic impacts between substances. In most cases, toxicity potentials are calculated with multi-media fate models. Until now, unrealistic system settings were used for these calculations. The present paper outlines an improved model to calculate toxicity potentials: the global nested multi-media fate, exposure and effects model USES-LCA. It is based on the Uniform System for the Evaluation of Substances 2.0 (USES 2.0). USES-LCA was used to calculate for 181 substances toxicity potentials for the six impact categories freshwater aquatic ecotoxicity, marine aquatic ecotoxicity, freshwater sediment ecotoxicity, marine sediment ecotoxicity, terrestrial ecotoxicity and human toxicity, after initial emission to the compartments air, freshwater, seawater, industrial soil and agricultural soil, respectively. Differences of several orders of magnitude were found between the new toxicity potentials and those calculated previously.     

Effects of cadmium on the performance and microbiology of laboratory-scale lagoons treating domestic sewage

Two experiments were performed to assess the impact of cadmium on the sewage lagoon wastewater treatment process. For each one, three laboratory-scale pilot plants with one tank receiving the same raw effluent were used; one plant served as control and the other two were contaminated once only with cadmium. In the first study, the effects of a shock load of two concentrations of cadmium chloride (60 and 300 micrograms/l) on the plant performance, microbial populations (protists and bacteria) and enzyme activities were determined. Initially, most of the performance parameters were affected concentration-dependently. A reduction in the protist population density and some influence on the total bacterial population were observed, and the potential enzymatic activities were also modified. A second experiment with a lower cadmium concentration (30 micrograms/l), supplied as chloride or sulphate, still perturbed most of the parameters studied, and the effects of the two cadmium salts were identical.     

A laboratory study of the mineralization and binding of 14C-labeled herbicide rimsulfuron in a rendzina soil.

The fate of pyrimidine-2-14C-rimsulfuron in a rendzina soil was investigated using a laboratory microcosm approach. Measurement of CO2 evolution suggested that rimsulfuron applied at 5 times the recommended dose did not affect soil respiration. Under abiotic conditions, no mineralization of 14C-rimsulfuron into 14C-CO2 occurred and under biotic ones it was very low reaching 0.75% of the applied 14C-rimsulfuron after 246 days of incubation. The analysis of data showed that a three-half order model provided the best fit for the mineralization curve. Extractable 14C-residues decreased over time to 70-80% of the applied 14C-rimsulfuron at the end of the incubation. After 246 days of incubation, non extractable residues (NER) accounted for up to 24.7% of the applied 14C-rimsulfuron and were distributed according to organic carbon in soil size fractions, suggesting a progressive incorporation process of NER to soil humus.