Polychlorinated biphenyls, organochlorine pesticides and polycyclic aromatic hydrocarbons in a one-off global survey of bivalves

During the Danish Galathea 3 expedition, bivalve samples were collected at the Faroe Islands, Greenland, Ghana, South Africa, Australia, Solomon Islands, New Zealand, Chile, US Virgin Islands, Boston, Newfoundland and Shetland Islands and analysed for organochlorines and PAHs. Concentration differences of up to three orders of magnitude were observed, with the highest concentrations at Boston harbour (SPCB 338 ng g(-1) dw, ΣSPAH 5966 ng g(-1) dw) and the Sydney estuary (ΣSPCB 282 ng g(-1) dw, SPAH 1453 ng g(-1) dw). Local impacts were also found for the Greenland capital Nuuk in terms of PCB and PAH levels, while other Greenland samples came closest to representing PAH background levels. Several locations had undetectable organochlorine levels, including Hobart and Chile, which had the lowest SPAH concentrations (<200 ng g(-1) dw). It was possible to group the stations according to their pyrogenic/petrogenic influence using Principal Component Analyses, and indications of petroleum sources were found at Nuuk.     

Land-use and agriculture in Denmark around year 1900 and the quest for EU Water Framework Directive reference conditions in coastal waters

The EU Water Framework Directive (WFD) aims to protect the ecological status of coastal waters. To establish acceptable boundaries between good and moderate ecological status, the WFD calls for reference conditions practically undisturbed by human impact. For Denmark, the nitrogen (N) concentrations present around year 1900 have been suggested to represent reference conditions. As the N load of coastal waters relates closely to runoff from land, any reduction in load links to agricultural activity. We challenge the current use of historical N balances to establish WFD reference conditions and initiate an alternative approach based on parish-level land-use statistics collected 1896/1900 and N concentrations in root zone percolates from experiments with year 1900-relevant management. This approach may be more widely applicable for landscapes with detailed historic information on agricultural activity. Using this approach, we find an average N concentration in root zone percolates that is close to that of current agriculture. Thus, considering Danish coastal waters to be practically unaffected by human activity around year 1900 remains futile as 75% of the land area was subject to agricultural activity with a substantial potential for N loss to the environment. It appears unlikely that the ecological state of coastal waters around year 1900 may serve as WFD reference condition.     

Analysis of currently available data for characterising the risk of engineered nanomaterials to the environment and human health--lessons learned from four case studies

Production volumes and the use of engineered nanomaterials in many innovative products are continuously increasing, however little is known about their potential risk for the environment and human health. We have reviewed publicly available hazard and exposure data for both, the environment and human health and attempted to carry out a basic risk assessment appraisal for four types of nanomaterials: fullerenes, carbon nanotubes, metals, and metal oxides (ENRHES project 2009(1)). This paper presents a summary of the results of the basic environmental and human health risk assessments of these case studies, highlighting the cross cutting issues and conclusions about fate and behaviour, exposure, hazard and methodological considerations. The risk assessment methodology being the basis for our case studies was that of a regulatory risk assessment under REACH (ECHA, 2008(2)), with modifications to adapt to the limited available data. If possible, environmental no-effect concentrations and human no-effect levels were established from relevant studies by applying assessment factors in line with the REACH guidance and compared to available exposure data to discuss possible risks. When the data did not allow a quantitative assessment, the risk was assessed qualitatively, e.g. for the environment by evaluating the information in the literature to describe the potential to enter the environment and to reach the potential ecological targets. Results indicate that the main risk for the environment is expected from metals and metal oxides, especially for algae and Daphnia, due to exposure to both, particles and ions. The main risks for human health may arise from chronic occupational inhalation exposure, especially during the activities of high particle release and uncontrolled exposure. The information on consumer and environmental exposure of humans is too scarce to attempt a quantitative risk characterisation. It is recognised that the currently available database for both, hazard and exposure is limited and there are high uncertainties in any conclusion on a possible risk. The results should therefore not be used for any regulatory decision making. Likewise, it is recognised that the REACH guidance was developed without considering the specific behaviour and the mode of action of nanomaterials and further work in the generation of data but also in the development of methodologies is required.     

Work injuries and disability

Problem

This study estimated the hazard ratio for disability pension retirement (DPR) for persons who have experienced a work injury causing absence lasting at least one day after the accidental injury occurred and to estimate the fraction of DPR attributable to work injuries.

Methods:

A total of 4,217 male and 4,105 female employees from a national survey were followed up for subsequent DPR.

Results and impact on industry and government:

Having had a work injury was a strong predictor of DPR among men. After control for age, smoking, body mass index, body postures, and physical demands, the hazard ratio (HR) among those employees who had ever experienced a work injury was 1.80 (95% confidence interval (CI): 1.20-2.68). No association was found among women.

Summary:

Having had a reportable work injury is a strong predictor of subsequent DPR for men.     

Fate and antibacterial potency of anticoccidial drugs and their main abiotic degradation products

The antibacterial potency of eight anticoccidial drugs was tested in a soil bacteria bioassay (pour plate method), EC₅₀-values between 2.4 and 19.6 μM were obtained; however, one compound, nicarbazin exhibited an EC₅₀-value above the maximum tested concentration (21 μM, 9.1 mg L⁻¹). The potency of mixtures of two of the compounds, narasin and nicarbazin, was synergistic (more than additive) with 10-fold greater antibacterial potency of the mixture than can be explained by their individual EC₅₀-values. The influence of pH, temperature, oxygen concentration and light on the transformation of robenidine and salinomycin was investigated. Robenidine was transformed by photolysis (DT₅₀ of 4.1 days) and was unstable at low pH (DT₅₀ of approximately 4 days); salinomycin was merely transformed at low pH, the latter into an unknown number of products. The antibacterial potency of the mixtures of transformation products of robenidine after photolysis and at low pH was comparable with that of the parent compound. Finally five photo-transformation products of robenidine were structural elucidated by accurate mass measurements, i-FIT values (isotopic pattern fit) and MS/MS fragmentation patterns.     

Past and future trends in concentrations of sulphur and nitrogen compounds in the Arctic

Recent trends in nitrogen and sulphur compounds in air and precipitation from a range of Arctic monitoring stations are presented, with seasonal data from the late 70s to 2004 or 2005. Earlier findings of declining sulphur concentrations are confirmed for most stations, while the pattern is less clear for reduced and oxidized nitrogen. In fact there are positive trends for nitrogen compounds in air at several stations. Acidity is generally reduced at many stations while the precipitation amount is either increasing or stable. Variability of sulphate concentrations in air for the period 1991–2000 is reasonably well reproduced at most stations using an Eulerian, hemispherical model. Results for nitrogen compounds are weaker. Scenario studies show that even if large sulphur emission reductions take place in important source regions in South-East Asia in the coming decades, only small changes in Arctic deposition can be expected. This is because South-East Asian emissions have small influence north of the Arctic circle.     

Skill and uncertainty of a regional air quality model ensemble

Recently several regional air quality projects were carried out to support the negotiation under the Clean Air For Europe (CAFE) programme by predicting the impact of emission control policies with an ensemble of models. Within these projects, CITYDELTA and EURODELTA, the fate of air quality at the scale of European cities or that of the European continent was studied using several models. In this article we focus on the results of EURODELTA. The predictive skill of the ensemble of models is described for ozone, nitrogen dioxide and secondary inorganic compounds, and the uncertainty in air quality modelling is examined through the model ensemble spread of concentrations.For ozone daily maxima the ensemble spread origin differs from one region to another. In the neighbourhood of cities or in mountainous areas the spread of predicted values does not span the range of observed data, due to poorly resolved emissions or complex-terrain meteorology. By contrast in Atlantic and North Sea coastal areas the spread of predicted values is found to be larger than the observations. This is attributed to large differences in the boundary conditions used in the different models. For NO₂ daily averages the ensemble spread is generally too small compared with observations. This is because models miss highest values occurring in stagnant meteorology in stable boundary layers near cities. For secondary particulate matter compounds the simulated concentration spread is more balanced, observations falling nearly equiprobably within the ensemble, and the spread originates both from meteorology and aerosol chemistry and thermodynamics.     

A High‐Resolution National‐Scale Hydrologic Forecast System from a Global Ensemble Land Surface Model

Warning systems with the ability to predict floods several days in advance have the potential to benefit tens of millions of people. Accordingly, large‐scale streamflow prediction systems such as the Advanced Hydrologic Prediction Service or the Global Flood Awareness System are limited to coarse resolutions. This article presents a method for routing global runoff ensemble forecasts and global historical runoff generated by the European Centre for Medium‐Range Weather Forecasts model using the Routing Application for Parallel computatIon of Discharge to produce high spatial resolution 15‐day stream forecasts, approximate recurrence intervals, and warning points at locations where streamflow is predicted to exceed the recurrence interval thresholds. The processing method involves distributing the computations using computer clusters to facilitate processing of large watersheds with high‐density stream networks. In addition, the Streamflow Prediction Tool web application was developed for visualizing analyzed results at both the regional level and at the reach level of high‐density stream networks. The application formed part of the base hydrologic forecasting service available to the National Flood Interoperability Experiment and can potentially transform the nation's forecast ability by incorporating ensemble predictions at the nearly 2.7 million reaches of the National Hydrography Plus Version 2 Dataset into the national forecasting system.     

Adsorption of mono- and di-butyltin by a wheat charcoal: pH effects and modeling

Understanding adsorption processes of butyltins (BTs) such as monobutyltin (MBT) and dibutyltin (DBT) by black carbons is important for the evaluation of BT exposure risks to organisms and humans. However, relevant knowledge is scarce. In this study, the acidity constants pK_a,1 = 2.3, pK_a,2 = 3.5 and pK_a,3 = 5.9 for MBT and pK_a,1 = 3.0 and pK_a,2 = 5.1 for DBT are estimated via potentiometric titration. Additionally, adsorption isotherms of BTs to a wheat charcoal were determined. The adsorption behavior was observed to be pH-dependent due to BT speciation and the pH-dependent surface charge of the charcoal. MBT adsorption to the charcoal decreases with increasing pH from 4 to 8, while the highest adsorption occurs at pH 6 for DBT. Adsorption of the BTs is successfully described in the pH range of 3-10 by using a newly developed pH-dependent Dual Langmuir model. The model has the potential to predict the interaction of BT species with charcoal, which can contribute to the risk assessments of BTs in the environment.