水热条件下绿矾稳定垃圾焚烧飞灰的研究

研究了饱和温度为200 ℃的水热条件下绿矾对垃圾焚烧飞灰中重金属的稳定效果,并与常温常压下的稳定效果进行了对比.研究结果表明,高温水热条件有利于Pb特别是Cr(Ⅵ)的稳定,对Cd的稳定无明显影响,同时绿矾的用量大为降低,降低了药剂的成本.     

Metals and organotins in multiple bivalve species in a one-off global survey

The Galathea 3 expedition circumnavigated the globe in 2006-2007 and collected marine samples from six continents. Bivalves were collected from harbours, other impacted locations and reference sites, and samples from 57 sites were analyzed for metals and 47 for organotins, to assess current contamination levels on a global scale. Metal concentrations in nine bivalve species were normalised to the Mytilidae family using conversion factors based on cosampled species and literature bioconcentration factors. The lowest metal and tributyltin concentrations were below background assessment concentrations (BACs) agreed in the Oslo-Paris convention (OSPAR) for the North Sea, and at most harbours the concentrations were orders of magnitude above BACs. The lowest concentrations of Cd and Pb measured here suggest that the BACs should be lower in a worldwide context. The sources of metals were classified according to human impact using principal component analysis. High relative concentrations of Hg, Pb and P were source indicators for industrial activity and land use; Zn, organotins, Cd and Cu for shipping activities, and V for oil spills. Generally the concentration levels at reference sites were low, but not always lower than expected impacted areas. The most contaminated areas were harbours, where especially Copenhagen, St Croix and Sydney, can be considered hotspots of tributyltin as well as a number of metals.     

Genetic amniocentesis at 7–14 weeks of gestation

Genetic amniocentesis performed at 7–14 weeks of gestation was studied in a series of 138 patients of whom 50 wanted termination of pregnancy (⩽ 12 weeks). The material for analysis consisted of 132 samples due to two sampling failures and four samples being handled incorrectly. Forty-eight samples (36 per cent) were taken at 7–12 weeks of gestation, mainly transvaginally (36/48:75 per cent). The success rate of culture and karyotyping increased with the duration of pregnancy, but was only satisfactory from week 11 onwards. The time until harvest was then 14–15 days. The transvaginal approach is easy to perform and was accepted by the women, but we experienced bacterial or fungal overgrowth in 17 per cent of these samples, whereas no infection occurred in the samples taken transabdominally (n = 96). We conclude that genetic amniocentesis is feasible from week 11, but further studies concerning side effects, especially focusing on the procedure-related abortion risk, should be carried out before early amniocentesis is routinely applied.     

The deterrent effect of increasing fixed penalties for traffic offences: the Norwegian experience

PROBLEM: Many motorized countries use fixed penalties to deter the most common traffic violations. Fixed penalties are usually given at the spot by a police officer. If the offender accepts the fixed penalty, no court hearing or trial is held. During the years 1995-2004, the rates for fixed penalties for traffic offences in Norway increased substantially. This paper evaluates the effects on compliance of these increases. METHOD: Regression analysis was performed to determine the effects of increases in fixed penalties. RESULTS: For speeding in general, no effect of increasing fixed penalties can be found. For speeding close to speed camera sites, there is a weak tendency for the violation rate to go down. This tendency is not statistically significant at conventional levels. For seat belt wearing, wearing rates are found to increase as fixed penalties have increased. In recent years, however, enforcement of the seat belt law has stepped up, making it impossible to separate the effect of enforcement from that of fixed penalties. IMPACT ON INDUSTRY: It has been suggested that the police may adapt to stricter penalties by reducing enforcement or by adopting larger tolerance margins for violations. Available evidence does not support this hypothesis.     

Environmental impact assessment of the incineration of municipal solid waste with auxiliary coal in China

The environmental impacts of waste incineration with auxiliary coal were investigated using the life-cycle-based software, EASEWASTE, based on the municipal solid waste (MSW) management system in Shuozhou City. In the current system, MSW is collected, transported, and incinerated with 250kg of coal per ton of waste. Based on observed environmental impacts of incineration, fossil CO(2) and heavy metals were primary contributors to global warming and ecotoxicity in soil, respectively. Compared with incinerators using excess coal, incineration with adequate coal presents significant benefits in mitigating global warming, whereas incineration with a mass of coal can avoid more impacts to acidification, photochemical ozone and nutrient enrichment because of increased electricity substitution and reduced emission from coal power plants. The "Emission standard of air pollutants for thermal power plants (GB13223-2011)" implemented in 2012 introduced stricter policies on controlling SO(2) and NO(x) emissions from coal power plants. Thus, increased use of auxiliary coal during incineration yields fewer avoided impacts on acidification and nutrient enrichment. When two-thirds of ash is source-separated and landfilled, the incineration of rest-waste presents better results on global warming, acidification, nutrient enrichment, and even ecotoxicity in soil. This process is considered a promising solution for MSW management in Shuozhou City. Weighted normalized environmental impacts were assessed based on Chinese political reduction targets. Results indicate that heavy metal and acidic gas emissions should be given more attention in waste incineration. This study provides scientific support for the management of MSW systems dominated by incineration with auxiliary coal in China.     

Assessing recycling versus incineration of key materials in municipal waste: The importance of efficient energy recovery and transport distances

Recycling of materials from municipal solid waste is commonly considered to be superior to any other waste treatment alternative. For the material fractions with a significant energy content this might not be the case if the treatment alternative is a waste-to-energy plant with high energy recovery rates. The environmental impacts from recycling and from incineration of six material fractions in household waste have been compared through life cycle assessment assuming high-performance technologies for material recycling as well as for waste incineration. The results showed that there are environmental benefits when recycling paper, glass, steel and aluminium instead of incinerating it. For cardboard and plastic the results were more unclear, depending on the level of energy recovery at the incineration plant, the system boundaries chosen and which impact category was in focus. Further, the environmental impact potentials from collection, pre-treatment and transport was compared to the environmental benefit from recycling and this showed that with the right means of transport, recyclables can in most cases be transported long distances. However, the results also showed that recycling of some of the material fractions can only contribute marginally in improving the overall waste management system taking into consideration their limited content in average Danish household waste.     

A load model based on antecedent dry periods for pollutants in stormwater.

A load model for stormwater constituents is proposed that describes mass retained on the drainage area after previous storms, as a function of a weighted sum of previous antecedent dry periods. It was used to compute the event load for 14 constituents--zinc, copper, cadmium, nickel, chromium, lead, mercury, silver, total suspended solids (TSS), E. coli, fecal coliform, total soluble phosphorus, total phosphorus, and 5-day biochemical oxygen demand. The results show acceptable fits for most constituents based on over 400 rain events (2000 to 2004) in Milwaukee, Wisconsin. Considering the retained pollutant mass after one previous storm rather than assuming the area to be clean after the previous storm gives more accurate results for all constituents, except TSS and silver. The model can be used for mixed land-use areas. The ratios of deposition fluxes of zinc and individual metals were determined at a major parking lot producing a profile characteristic of automobile emissions.     

Apportionment of ambient primary and secondary fine particulate matter at the Pittsburgh National Energy Laboratory particulate matter characterization site using positive matrix factorization and a potential source contributions function analysis

Fine particulate matter (PM2.5) concentrations associated with 202 24-hr samples collected at the National Energy Technology Laboratory (NETL) particulate matter (PM) characterization site in south Pittsburgh from October 1999 through September 2001 were used to apportion PM2.5 into primary and secondary contributions using Positive Matrix Factorization (PMF2). Input included the concentrations of PM2.5 mass determined with a Federal Reference Method (FRM) sampler, semi-volatile PM2.5 organic material, elemental carbon (EC), and trace element components of PM2.5. A total of 11 factors were identified. The results of potential source contributions function (PSCF) analysis using PMF2 factors and HYSPLIT-calculated back-trajectories were used to identify those factors associated with specific meteorological transport conditions. The 11 factors were identified as being associated with emissions from various specific regions and facilities including crustal material, gasoline combustion, diesel combustion, and three nearby sources high in trace metals. Three sources associated with transport from coal-fired power plants to the southeast, a combination of point sources to the northwest, and a steel mill and associated sources to the west were identified. In addition, two secondary-material-dominated sources were identified, one was associated with secondary products of local emissions and one was dominated by secondary ammonium sulfate transported to the NETL site from the west and southwest. Of these 11 factors, the four largest contributors to PM2.5 were the secondary transported material (dominated by ammonium sulfate) (47%), local secondary material (19%), diesel combustion emissions (10%), and gasoline combustion emissions (8%). The other seven factors accounted for the remaining 16% of the PM2.5 mass. The findings are consistent with the major source of PM2.5 in the Pittsburgh area being dominated by ammonium sulfate from distant transport and so decoupled from local activity emitting organic pollutants in the metropolitan area. In contrast, the major local secondary sources are dominated by organic material.     

北极4个亚区的影响分析

在评价北极陆地生态系统影响时,人们常常强调物种和生态系统对环境变化响应的地理变化,这种变化往往与气候、生物多样性、植被带、生态系统结构和功能的南-北梯度相关联,可是,环境、生态系统的功能和结构上,以及环境史和当前气候变化的明显东-西变化显然也很重要.尽管一些地方变得温暖,但另一些地方却降温了,海洋、群岛和山脉等地理屏障的东西差异过去也对物种和植被带响应气候变化而改变分布区的能力产生了很大影响,同时,这些地理屏障为种群遗传分化和生物多样性热点区的形成提供了必要的隔离条件,这些屏障在未来气候变暖时,也将影响物种重新分布的能力.为了说明这种东西向的变化,同时也避免过分笼统或过于专业化,基于大尺度的天气和气候形成因素,北极气候影响评价项目确定了4个主要亚区.通过模拟与4个北极气候影响评价亚区有关的主要信息,导致物种分布区发生改变的地理屏障,特别是大陆的分布和海洋产生的隔离,明显会影响植被带的向北移动.对植被区向北移动的地理限制或者促进将影响将来碳的贮存和释放,以及生物圈与大气之间水和能量的交换.此外,气候变化使受威胁物种数量在各个亚区之间差别很大(白令海地区别尤其是热点),各个植被亚区重新分布的能力差异将影响每个区的生物多样性.总而言之,亚区分析表明,在整个北极地区水平上概括生态系统结构和功能的反应、物种的丧失,以及生物圈对气候系统的反馈的趋势是困难的,说明需要对北极陆地生态系统对于气候变化响应的空间变化性有深刻的认识.