Longitudinal examination of underage drinking and subsequent drinking and risky driving

INTRODUCTION: Alcohol use, alcohol misuse, and risky driving from adolescence into young adulthood were compared by drinking onset age. METHODS: Surveys were administered in Grades 5/6, 6/7, 7/8, 10, 12, and at approximately age 23. Participants were placed into Drinking Onset groups based on self-reported alcohol use frequency on the adolescent surveys. Driving records were examined in three age periods: under 21, 21-25, and 26+. RESULTS: The earliest drinking initiators reported higher alcohol use and misuse on each survey, and were more likely to have risky driving offenses before age 21 and to have alcohol driving offenses in all three age periods. DISCUSSION: The earliest drinking initiators engaged in risky drinking behavior and risky driving behavior that was consistently higher than those with later drinking initiation, beginning in adolescence and persisting well into young adulthood.     

SAFEST TO TRAVEL BY BICYCLE,CAR, OR BIG TRUCK?

This study compares highway crash incidence, injuries, and costs by vehicle type. Annual crash and injury incidence were estimated using Crashworthiness Data System (1988-1991), National Automotive Sampling System (1982-1986), General Estimates System (1992-1993), and Fatal Analysis Reporting System (1993) data. Costs were computed based on restraint use, body region, and threat-to-life severity of the injury. Costs were then allocated between vehicle types using three different methods in order to answer comparative safety questions. Motor vehicle and bicycle crash costs total $389 billion annually; 75% resulting from passenger vehicles. Motorcycles and bicycles have the highest costs per 1000 vehicle and passenger miles; costs per victim are highest for pedestrians, bicyclists, and motorcyclists. Costs per vehicle mile for heavy trucks and passenger cars are comparable but exceed costs for light trucks. Passenger vehicle occupants are safest if a crash occurs. Light truck, other single truck, and bus occupants have the lowest cost per passenger mile, but higher costs than air and rail travelers. Motorcyclists face the greatest risks. Combination trucks may not impose an excess risk to other drivers, but their drivers face large risks.     

Review: The Dynamics of Near Vertex Head Impact and its Role in Injury Prevention and the Complex Clinical Presentation of Basicranial and Cervical Spine Injury

The clinical presentation of cervical and basilar skull fractures following bead impact is often complex, particularly when multiple noncontiguous fractures are present. Based on the results of 22 human cadaver head-neck impact experiments, a biomechanical framework of spinal injury is developed in which these complex cases may be better understood. This includes the significance of head rebound, head and neck decoupling, cervical spine buckling, cervical injury mechanisms, basilar skull fractures, and cervical spine tolerance. These data also demonstrate that compliant pads significantly increase the risk for spinal injury though they also significantly reduce peak head force and the head injury criteria (p < 0.04). On the basis of these observations, we hypothesize that impact injury should be modeled as the dynamic response of two large masses, coupled by a segmented curved beam-column composed of seven small masses with interposed nonlinear viscoelastic flexibility elements.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Integrated Estimation of the Effect of Physical Factors on Human Functional State During Mental Work

The purpose of this study was to develop a model for an integrated estimation of the functional state of the human organism (FSHO) and an integral estimation of physical factors (PF) for hygienic rating. Tests were performed twice with 3 men in 0.7-clo clothing during 4-hr mental work with 9 combinations of 4 PF: wideband noise (55–83 dB(A)), whole-body vibration (6 Hz, a_z = 0.2–1.8 ms^?2), air temperature (18–30 °C), and illumination (1, 3, 5 lx). Thermoregulatory, cardiovascular, and psychophysiological reactions and temporary threshold of hearing (TTS₂) shifts were studied. For the integral estimation of PF influence on FSHO the model F(y₁, y₂, ... y_m) = f(x₁, x₂, ... x_n) was used, relating both FSHO and PF sets. The most important physiological parameters in creating FSHO are defined and the contribution of individual parameters of FSHO and PF is found.     

Synergy Between Visual and Auditory Signals and Its Influence on the Follow-Up Regulation Quality

The study aimed at verifying a hypothesis that supporting a visual signal of regulation deviation with an auditory one could improve the quality of regulation; the operator would have better information on machine operation. A special simulator was applied to follow-up tracking with a manual lever which controlled vertical movements of a cursor on a monitor screen. Simultaneously with visual information on screen, the operator was provided with an auditory deviation signal of pre-determined characteristics. 33 young males underwent the test. It was found that supporting a visual signal with an auditory one resulted in an improvement in the regulation quality by 5-6%, which proved synergy between those signals. The results may be used in designing tele- and servo-mechanisms, especially for remote control machinery, e.g., inspection robots or micromanipulators controlled by operators in a follow-up system.     

Experimental investigation of spark ignition energy in kerosene,hexane, and hydrogen

Quantifying the risk of accidental ignition of flammable mixtures is extremely important in industry and aviation safety. The concept of a minimum ignition energy (MIE), obtained using a capacitive spark discharge ignition source, has traditionally formed the basis for determining the hazard posed by fuels. While extensive tabulations of historical MIE data exist, there has been little work done on ignition of realistic industrial and aviation fuels, such as gasoline or kerosene. In the current work, spark ignition tests are performed in a gaseous kerosene–air mixture with a liquid fuel temperature of 60 °C and a fixed spark gap of 3.3 mm. The required ignition energy was examined, and a range of spark energies over which there is a probability of ignition is identified and compared with previous test results in Jet A (aviation kerosene). The kerosene results are also compared with ignition test results obtained in previous work for traditional hydrogen-based surrogate mixtures used in safety testing as well as two hexane–air mixtures. Additionally, the statistical nature of spark ignition is discussed.     

Assessment of an accidental vapour cloud explosion: Lessons from the Indian Oil Corporation Ltd. accident at Jaipur,India

On 29 October 2009, at 19:30 IST, a devastating vapour cloud explosion occurred in a large fuel storage area at the Indian Oil Corporation (IOC) Depot in Jaipur, India, generating significant blast pressure. As a consequence of this explosion, the entire installation was destroyed, buildings in the immediate vicinity were heavily damaged, and windowpane breakages were found up to 2 km from the terminal. The IOC estimated that the total loss from the fire and explosion was approximately INR 2800 million.Ironically, as a storage site, the Jaipur terminal was not highly congested, and thus was not considered to have adequate potential for a vapour cloud explosion (VCE). Nevertheless, the prima facie evidences indicate that this was a case of VCE. Therefore, the main objective of this study is to quantify the potential overpressures due to vapour cloud explosions (VCEs) using the Process Hazard Analysis DNV Norway based PHAST 6.51 Software. The results are validated by the extent of the damage that had occurred. The estimation of the VCE shows that a maximum 1.0 bar overpressure was generated in the surrounding area. The initial assessment of the accident data roughly estimates the release mode, time, and amount of vaporized fuel. A more accurate estimate has been obtained by modelling the dispersion of vapour clouds in the surrounding atmosphere, which reveals trends and relationships for the occurrence of vapour cloud explosions.     

A new approach for layout optimization in maintenance workshops with safety factors: The case of a gas transmission unit

In this study, an Integrated Simulation-Data Envelopment Analysis (DEA) approach is presented for optimum facility layout of maintenance workshop in a gas transmission unit. The process of repair of incoming parts includes various operations on different facilities. The layout problem in this system involves determining the optimum location of all maintenance shop facilities. Layout optimization plays a crucial role in this type of problems in terms of increasing the efficiency of main production line. Standard types of layouts including U, S, W, Z and straight lines are considered. First, the maintenance workshop is modeled with discrete-event-simulation. Time in system, average waiting time, average machine utilization, average availability of facilities, average queue length of facilities (AL) and average operator utilization are obtained from simulation as key performance indicators (KPIs) of DEA. Also, safety index and number of operators are considered as other KPIs. Finally, a unified non-radial Data Envelopment Analysis (DEA) is presented with respect to the stated KPIs to rank all layouts alternatives and to identify the best configuration. Principle Component Analysis (PCA) is used to validate and verify the results. Previous studies do not consider safety factor in layout design problems. This is the first study that presents an integrated approach for identification of optimum layout in a maintenance workshop of gas transmission unit by incorporating safety and conventional factors.