A review on application of activated carbons for carbon dioxide capture: present performance,preparation, and surface modification for further improvement

Environmental Science and Pollution Research - The atmosphere security and regulation of climate change are being continuously highlighted as a pressing issue. The crisis of climate change owing to...     

Current practice of first-trimester ultrasound screening for structural fetal anomalies in developed countries

Objectives

First-trimester ultrasound screening is increasingly performed to detect fetal anomalies early in pregnancy, aiming to enhance reproductive autonomy for future parents. This study aims to display the current practice of first-trimester ultrasound screening in developed countries.

Method

An online survey among 47 prenatal screening experts in developed countries.

Results

First-trimester structural anomaly screening is available in 30 of the 33 countries and is mostly offered to all women with generally high uptakes. National protocols are available in 23/30 (76.7%) countries, but the extent of anatomy assessment varies. Monitoring of scan quality occurs in 43.3% of the countries. 23/43 (53.5%) of the respondents considered the quality of first-trimester ultrasound screening unequal in different regions of their country.

Conclusions

First-trimester screening for structural fetal anomalies is widely offered in developed countries, but large differences are reported in availability and use of screening protocols, the extent of anatomy assessment, training and experience of sonographers and quality monitoring systems. Consequently, this results in an unequal offer to parents in developed countries, sometimes even within the same country. Furthermore, as offer and execution differ widely, this has to be taken into account when results of screening policies are scientifically published or compared.     

New mechanism of FA in composted sludge inducing Cu fixation on Albite in open-pit mine soil

Fulvic acid (FA), typical organic matter derived from humification process in composted sludge, possesses the potential to remediate mine soils contaminated by heavy metals. To understand the cooper (Cu) immobilizing process in open-pit mine soil induced by FA, changes of Cu speciation in mixture of open-pit mine soil and composted sludge was tracked over 180 days. It was observed that the organic-bound and residual fraction of Cu increased dramatically with the corresponding decrease of Fe/Mn oxide-bound Cu in the first 60 days, then the organic-bound fraction decreased to about its initial proportion during 60-120 days, while residual fraction still increased, and the proportion of residual Cu accounted for over 85% and became stable after 120 days. To reveal the mechanism of FA inducing Cu fixation on Albite which is the main phase of soil primary ore, two groups of Cu adsorption experiments with and without FA were designed. With the addition of FA, the adsorption capacity of Cu by Albite increased by 1.55 times and the content of residual Cu in Albite increased by 7.7 times. It was found that the Cu absorbed in smaller Albite particle induced by FA formed a secondary mineral——Chrysocolla, causing increase of residual fraction of Cu. These results revealed the mechanism: FA was absorbed on the surface of Albite after complexing with Cu ions in the solution, and then it induced Cu into the interlayer and pore channels of Albite. The Cu in the Albite was immobilized by forming Chrysocolla finally.     

Enhanced biological phosphorus removal using thermal alkaline hydrolyzed municipal wastewater biosolids

This study reports the feasibility of using municipal wastewater biosolids as an alternative carbon source for biological phosphorus removal. The biosolids were treated by a lowtemperature, thermal alkaline hydrolysis process patented by Lystek International Inc.(Cambridge, ON, Canada) to produce short-chain volatile fatty acids and other readily biodegradable organics. Two sequencing batch reactors(SBRs) were operated with synthetic volatile fatty acids(Syn VFA) and readily biodegradable organics produced from the alkaline hydrolysis of municipal wastewater biosolids(Lystek) as the carbon source, respectively.Municipal wastewaters with different strengths and COD:N:P ratios were tested in the study. The reactors' performances were compared with respect to nitrogen and phosphorus removal. It was observed that phosphorus removal efficiencies were between 98%–99% and 90%–97% and nitrogen removal efficiencies were 78%–81%, and 67% for the Syn VFA and Lystek, respectively. However, the kinetics for phosphorus release and uptake during the anaerobic and aerobic stages with Lystek were observed to be significantly lower than Syn VFA due to the presence of higher order VFAs(C4 and above) and other fermentable organics in the Lystek.     

Low nutrient levels as drinking water conditions can reduce the fitness cost of efflux pump-mediated ciprofloxacin resistance in Pseudomonas aeruginosa

The long-term persistence of antibiotic resistance in the environment, especially in drinking water, is a public health concern. Expression of an efflux pump, an important mechanism of resistance to antibiotics, usually confers a fitness cost in bacteria. In this study, we aimed to determine why antibiotic resistance conferred by overexpression of an efflux pump persisted in low-nutrient environments(TOC 10 mg/L) such as drinking and source water in which antibiotic selective pressure might be very low or even absent.Competition experiments between wild-type Pseudomonas aeruginosa and ciprofloxacinresistant mutants revealed that the fitness cost of ciprofloxacin resistance significantly decreased(p 0.05) under low-nutrient(0.5 mg/L total organic carbon(TOC)) relative to high-nutrient(500 mg/L TOC) conditions. Mechanisms underlying this fitness cost were analyzed. The mexD gene expression in resistant bacteria(cip_3 strain) was significantly lower(p 0.05) in low-nutrient conditions, with 10 mg/L TOC((8.01 ± 0.82)-fold), than in high-nutrient conditions, with 500 mg/L TOC((48.89 ± 4.16)-fold). Moreover, rpoS gene expression in resistant bacteria((1.36 ± 0.13)-fold) was significantly lower(p 0.05) than that in the wild-type strain((2.78 ± 0.29)-fold) under low-nutrient conditions(10 mg/L TOC),suggesting a growth advantage. Furthermore, the difference in metabolic activity between the two competing strains was significantly smaller(p 0.05) in low-nutrient conditions(5 and 0.5 mg/L TOC). These results suggest that nutrient levels are a key factor in determining the persistence of antibiotic resistance conferred by efflux pumps in the natural environment with trace amounts or no antibiotics.     

Silica-quaternary ammonium “Fixed-Quat” nanofilm coated fiberglass mesh for water disinfection and harmful algal blooms control

Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms(HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products(DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds(QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC(Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol–gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10~(-3) log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure.The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall,the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.     

Monitoring biofouling based on aerobic respiration in reverse osmosis system

A monitoring method of biofouling in reverse osmosis (RO) system was proposed based on the fluorescent signal of resorufin, which is reduced by nicotinamide adenine dinucleotide released from viable cells during aerobic respiration. The fluorescent signal of resorufin reduced by planktonic cells and microorganisms of biofilm showed linearity, indicating its feasibility to monitor biofouling in a RO system. For the application of the method to the lab-scale RO system, the injection concentration of resazurin and the injection flow rate were optimized. Biofilm on RO membranes continuously operated in a lab-scale RO system was estimated by resorufin fluorescence under optimized detection condition. As a result, resorufin fluorescence on RO membrane showed a significant increase in which the permeability of RO system decreased by 30.48%. Moreover, it represented the development of biofilm as much as conventional biofilm parameters such as adenosine triphosphate, extracellular polymeric substances, and biofilm thickness. The proposed method could be used as a sensitive and low-cost technology to monitor biofouling without autopsy of membranes.     

Facile synthesis of graphitic carbon-nitride supported antimony-doped tin oxide nanocomposite and its application for the adsorption of volatile organic compounds

Antimony-doped tin oxide(ATO) nanoparticles with an average size of ～ 6 nm were prepared by co-precipitation and subsequent heat treatment. Graphitic carbon nitride(g-CN)/ATO hybrid nanocomposite was designed by the combination of thermally synthesized g-CN and ATO nanoparticles by ultrasonication. The materials were characterized using N2 adsorption/desorption(BET), X-ray diffraction(XRD), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and Fourier transform infrared spectroscopy(FTIR). A mixture of five volatile organic compounds(VOCs, chloroform, benzene, toluene, xylene and styrene) was used to compare the adsorption capacity of the samples. The adsorption capacity of ATO nanoparticles was improved by the addition of g-CN. Experimental data showed that, among the five VOCs,chloroform was the least adsorbed, regardless of the samples. The g-CN/ATO showed nearly three times greater adsorption capacity for the VOC mixture than pure ATO. The unchanged efficiency of VOC adsorption during cyclic use demonstrated the completely reversible adsorption and desorption behavior of the nanocomposite at room conditions. This economically and environmentally friendly material can be a practical solution for outdoor and indoor VOC removal.     

四氧化三铁/聚乙烯亚胺纳米颗粒的制备及除磷性能的研究

采用化学共沉淀法,以聚乙烯亚胺(PEI)为改性剂,制备了聚乙烯亚胺改性的纳米四氧化三铁复合材料(Fe3O4/PEI).Zeta电位、透射电镜和FTIR表征结果显示,PEI修饰提高了纳米Fe3O4在水中的分散性和稳定性,同时也增强了其表面正电荷,从而提高了Fe3O4对水中磷酸根的去除能力.在磷酸根初始浓度为50 mg·L~(-1),Fe3O4/PEI投加量为200 mg,p H=3,温度为25℃的条件下,Fe3O4/PEI对100 m L磷酸根的吸附去除率达到91%.吸附过程在3 h内达到平衡.吸附等温数据表明,该吸附过程符合Langmuir吸附等温方程,可决系数R2达到0.99,最大吸附量为29.88 mg·L~(-1).Fe3O4/PEI复合材料重复利用性好,在第5次吸附-解析后还能保持对磷酸根75%以上的吸附去除率.磷的解析效率随着p H增加而增加,在p H=13时,解析效率达到65%.