浅谈我校生态综合实验室的合理利用和管理

我校生态综合实验室由实验室、仪器设备储藏室和教师预备室组成。本文针对该实验室在运行中由于教学任务的逐年增加导致的实验室软硬件建设相对滞后等问题,在实验室的管理建设方面提出了提高综合利用率等建议。     

Highly efficient conversion of sugarcane bagasse pretreated with liquid hot water into ethanol at high solid loading

Liquid hot water (LHW), an environmental-friendly physico-chemical treatment, was applied to pretreat the sugarcane bagasse (SCB). Tween80, a non-ionic surfactant, was used to enhance the enzymatic hydrolysis of the pretreated SCB. It found that 0.125 mL Tween80 /g dry matter could make the maximum increase (33.2%) of the glycan conversion of the LHW-pretreated SCB. A self-designed laboratory facility with a plate-and-frame impeller was applied to conduct batch hydrolysis, fed-batch hydrolysis, and the process of high-temperature (50°C) fed-batch hydrolysis following low-temperature (30°C) simultaneous saccharification and fermentation (SSF) which was adopted to overcome the incompatible optimum temperature of saccharification and fermentation in the SSF process. After hydrolyzing LHW-pretreated SCB for 120 h with commercial cellulase, the total sugar concentration and glycan conversion obtained from fed-batch hydrolysis were 91.6 g/L and 68.3%, respectively, which were 9.7 g/L and 7.3% higher than those obtained from batch hydrolysis. With Saccharomyces cerevisiae Y2034 fermenting under the non-sterile condition, the ethanol production and theoretical yield obtained from the process of SSF after fed-batch hydrolysis were 55.4 g/L and 88.3% for 72h, respectively, which were 15.5 g/L and 24.7% higher than those from separate fed-batch hydrolysis and fermentation. The result of this work was superior to the reported results obtained from the LHW-pretreated SCB.     

Steam reforming of glycerol for syngas generation under cold plasma conditions: A DFT study

Density functional theory (DFT) has been used to investigate the reaction pathways with steam reforming of glycerol under cold plasma conditions. Total energies, energy barriers, and reaction enthalpies at 298.15 K have been calculated at the GGA/PW91/DNP level. The calculation shows that, with the presence of steam, the energy barrier of glycerol conversion is reduced and the conversion from glycerol to H₂ and CO is promoted under cold plasma conditions. The formation of syngas was through a multi-step pathway via the conversion of OHCH₂CHOH, CH₂OH, CH₂O, HCO,·and CH₃, while the recombination of H generated extra H₂. The synthesis of hydrocarbons are from the recombination of·CH₃,·CH₂, and·CH, which could be primarily generated through glycerol dissociation. The structure of glycerol anion was also studied in this work, and it was less stable than the neutral molecule. The route for the formation of OHCH₂CHOH·and CH₂OH·from glycerol anion is thermodynamically favorable.     

Economic dispatch of power system containing wind power and photovoltaic considering carbon trading and spare capacity variation

The drying up of the fossil energy sources and the damage from unchecked carbon emissions demand the development of low carbon economy, which promotes the development of new energy sources, such as wind power and photovoltaic. However, the direct connections of wind/photovoltaic power into power grid bring great impacts on power systems, thus affecting the security and stability of power system operations, which challenges the power system dispatching. In despite of many methods for power system dispatch, lack of the models, for power system containing wind power and photovoltaic considering carbon trading and spare capacity variation (PSCWPCCTSCV), restricts the further optimal operations of power systems. This paper studies the economic dispatch modeling problem of power system containing wind power and photovoltaic, establishes the model of economic dispatch of PSCWPCCTSCV. On this basis, adaptive immune genetic algorithm is applied to conduct the economic operation optimization, which can provide the optimal carbon trading price and the optimal power distribution coefficient. Finally, simulations based on the newly proposed models are made to illustrate the economic dispatch of PSCWPCCTSCV. The results show that optimization with the proposed model can not only weaken the volatility of the new energy effectively, but also reduce carbon emissions and reduce power generation costs.     

灰色系统模型在总悬浮物预测中的应用

以１９８６－１９９４年东北某城市总悬浮物统计资料为依据，应用灰色系统理论ＧＭ（１，１）模型对总量浮物数值进行预测分析。     

工作场所空气中硫酸雾（SO3）的分析

采用碘量法测定工作场所空气中的三氧化硫及硫酸雾，三氧化硫及硫酸雾经中性水吸收后与碘化钾和碘酸钾反应，析出的碘与淀粉指示剂作用产生蓝色，进行比色测定。     

An integrated method for removal of harmful cyanobacterial blooms in eutrophic lakes

As the eutrophication of lakes becomes an increasingly widespread phenomenon, cyanobacterial blooms are occurring in many countries. Although some research has been reported, there is currently no good method for bloom removal. We propose here a new two-step integrated approach to resolve this problem. The first step is the inactivation of the cyanobacteria via the addition of H(2)O(2). We found 60 mg/L was the lowest effective dose for a cyanobacterial concentration corresponding to 100 μg/L chlorophyll-a. The second step is the flocculation and sedimentation of the inactivated cyanobacteria. We found the addition of lake sediment clay (2 g/L) plus polymeric ferric sulfate (20 mg/L) effectively deposited them on the lake bottom. Since algaecides and flocculants had been used separately in previous reports, we innovatively combined these two types of reagents to remove blooms from the lake surface and to improve the dissolved oxygen content of lake sediments.     

Origin and distribution of trace elements in high-elevation precipitation in southern China

Introduction

During a 2009 investigation of the transport and deposition of trace elements in southern China, 37 event-based precipitation samples were collected at an observatory on Mount Heng, China (1,269?m asl).

Methods

Concentrations of trace elements were analyzed using inductively coupled plasma?Cmass spectrometry and the wet deposition fluxes were established. A combination of techniques including enrichment factor analysis, principal component analysis, and back trajectory models were used to identify pollutant sources.

Results

Trace element concentrations at Mount Heng were among the highest with respect to measured values reported elsewhere. All elements were of non-marine origin. The elements Pb, As, Cu, Se, and Cd were anthropogenic, while Fe, Cr, V, Ba, Mn, and Ni were of mixed crustal/anthropogenic origin. The crustal and anthropogenic contributions of trace elements were 12.8 % (0.9?~?17.4 %) and 87.2 % (82.6?~?99.1 %), with the maximum crustal fraction being 17.4 % for Fe. Coal combustion, soil and road dust, metallurgical processes, and industrial activities contributed to the element composition.

Conclusions

Summit precipitation events were primarily distant in origin. Medium- to long-range transport of trace elements from the Yangtze River Delta and northern China played an important role in wet deposition at Mount Heng, while air masses from south or southeast of the station were generally low in trace element concentrations.     

Influence of root-exudates concentration on pyrene degradation and soil microbial characteristics in pyrene contaminated soil

The effect of ryegrass (Lolium perenne L.) root-exudates concentration on pyrene degradation and the microbial ecological characteristics in the pyrene contaminated soil was investigated by simulating a gradually reducing concentration of root exudates with the distance away from root surface in the rhizosphere. Results showed that, after the root-exudates were added 15 d, the pyrene residue in contaminated soil responded nonlinearly in the soils with the same pyrene contaminated level as the added root-exudates concentration increased, which decreased first and increased latter with the increase of the added root-exudates concentration. The lowest pyrene concentration appeared when the root exudates concentration of 32.75 mg kg(-1) total organic carbon (TOC) was added. At the same time, changes of microbial biomass carbon (MBC, C(mic)) and microbial quotient (C(mic)/C(org)) were opposite to the trend of pyrene degradation as the added root-exudates concentration increased. Phospholipid fatty acid (PLFA) analysis revealed that bacteria was the dominating microbial community in pyrene contaminated soil, and the changing trends of pyrene degradation and bacteria number were the same. The changing trend of endoenzyme-dehydrogenase activity was in accordance with that of soil microbe, indicating which could reflect the quantitative characteristic of detoxification to pyrene by soil microbe. The changes in the soils microbial community and corresponding microbial biochemistry characteristics were the ecological mechanism influencing pyrene degradation with increasing concentration of the added root-exudates in the pyrene contaminated soil.     

The removal of hydrogen sulfide in solution by ferric and alum water treatment residuals

This work investigated the characteristics and mechanisms of hydrogen sulfide adsorption by ferric and alum water treatment residuals (FARs) in solution. The results indicated that FARs had a high hydrogen sulfide adsorption capacity. pH 7 rather than higher pH (e.g. pH 8-10) was favorable for hydrogen sulfide removal. The Yan model fitted the breakthrough curves better than the Thomas model under varied pH values and concentrations. The Brunauer-Emmett-Teller surface area and the total pore volume of the FARs decreased after the adsorption of hydrogen sulfide. In particular, the volume of pores with a radius of 3-5 nm decreased, while the volume of pores with a radius of 2 nm increased. Therefore, it was inferred that new adsorption sites were generated during the adsorption process. The pH of the FARs increased greatly after adsorption. Moreover, differential scanning calorimetry analysis indicated that elemental sulfur was present in the FARs, while the derivative thermal gravimetry curves indicated the presence of sulfuric acid and sulfurous acid. These results indicated that both oxidization and ligand exchange contribute to the removal of hydrogen sulfide by FARs. Under anaerobic conditions, the maximum amount of hydrogen sulfide released was approximately 0.026 mg g(-1), which was less than 0.19% of the total amount adsorbed by the FARs. The hydrogen sulfide that was released may be re-adsorbed by the FARs and transformed into more stable mineral forms. Therefore, FARs are an excellent adsorbent for hydrogen sulfide.