Influence of contrasting larval developmental types upon the population-genetic structure of cheilostome bryozoans

For many sedentary or sessile benthic marine invertebrates the planktonic duration of the larval stage is believed to be a key determinant of the magnitude of genetic differences between populations. An obvious dichotomy in dispersal potential exists within cheilostome bryozoans that develop from either (1) a cyphonautes larva that spends several weeks in the plankton or (2) a brooded coronate larva that settles soon after release from the adult colony. This study characterises the pattern of variation at allozyme loci among British populations of four species of bryozoan—two species with cyphonautes and two with coronate larvae. There is some variation in the estimates of genetic differentiation among similarly separated populations that may be a consequence of non-equilibrium genetic conditions arising from sporadic migration, possibly through dispersal by rafting on macroalgae by mature colonies. Despite this, however, both the level of genetic differentiation between populations and the pattern of migrant exchange correlate with the larval developmental mode. Bryozoan species that brood coronate larvae show higher levels of genetic heterogeneity between populations and significant isolation by distance genetic structure while, by contrast, distance has little or no effect upon the amount of genetic differentiation among populations of bryozoans with cyphonautes larvae. For cheilostome bryozoans, therefore, it appears that genetic differentiation between populations is directly associated with the type of larval development. These data are discussed also with respect to levels of gene diversity and the geological pattern of cheilostome bryozoan species diversity.     

The application of predictive models in the environmental risk assessment of ECONOR

Environmental risk assessment of products requires information on the physico-chemical properties, persistence and ecotoxicity of the product, its constituents and possible metabolic and degradation products. Experimental investigations are usually required to generate this information and consequently risk assessment can be costly and time consuming. One possible approach to minimising the amount of experimental testing is to supplement experimental data with data predicted using models such as quantitative structure-activity relationships (QSARs). Using these models, information can be generated based primarily on the knowledge of the chemical structure of the substance(s) under investigation. In this study predictive models were used to assess the environmental risk of the veterinary medicine, ECONOR which contains the active ingredient valnemulin. Available experimental data on the properties, degradability and ecotoxicity of valnemulin was supplemented with predicted data. Where possible, experimental data was used to validate the predicted approaches and this indicated that the predictions were accurate. Information on usage, properties and degradability was input to fate models to predict environmental concentrations (PECs) of valnemulin in soil, pore water and groundwater. Comparison of PECs with experimental and predicted ecotoxicity data for valnemulin indicated that that even under 'worst case' scenarios the environmental risk posed by valnemulin was low.     

Arsenic contamination of natural waters in San Juan and La Pampa, Argentina

Arsenic (As) speciation in surface and groundwater from two provinces in Argentina (San Juan and La Pampa) was investigated using solid phase extraction (SPE) cartridge methodology with comparison to total arsenic concentrations. A third province, Río Negro, was used as a control to the study. Strong cation exchange (SCX) and strong anion exchange (SAX) cartridges were utilised in series for the separation and preservation of arsenite (As^III), arsenate (As^V), monomethylarsonic acid (MA^V) and dimethylarsinic acid (DMA^V). Samples were collected from a range of water outlets (rivers/streams, wells, untreated domestic taps, well water treatment works) to assess the relationship between total arsenic and arsenic species, water type and water parameters (pH, conductivity and total dissolved solids, TDS). Analysis of the waters for arsenic (total and species) was performed by inductively coupled plasma mass spectrometry (ICP-MS) in collision cell mode. Total arsenic concentrations in the surface and groundwater from Encon and the San José de Jáchal region of San Juan (north-west Argentina within the Cuyo region) ranged from 9 to 357 μg l^?1 As. Groundwater from Eduardo Castex (EC) and Ingeniero Luiggi (LU) in La Pampa (central Argentina within the Chaco-Pampean Plain) ranged from 3 to 1326 μg l^?1 As. The pH range for the provinces of San Juan (7.2–9.7) and La Pampa (7.0–9.9) are in agreement with other published literature. The highest total arsenic concentrations were found in La Pampa well waters (both rural farms and pre-treated urban sources), particularly where there was high pH (typically > 8.2), conductivity (>2,600 μS cm^?1) and TDS (>1,400 mg l^?1). Reverse osmosis (RO) treatment of well waters in La Pampa for domestic drinking water in EC and LU significantly reduced total arsenic concentrations from a range of 216–224 μg l^?1 As to 0.3–0.8 μg l^?1 As. Arsenic species for both provinces were predominantly As^III and As^V. As^III and As^V concentrations in San Juan ranged from 4–138 μg l^?1 to <0.02–22 μg l^?1 for surface waters (in the San José de Jáchal region) and 23–346 μg l^?1 and 0.04–76 μg l^?1 for groundwater, respectively. This translates to a relative As^III abundance of 69–100% of the total arsenic in surface waters and 32–100% in groundwater. This is unexpected because it is typically thought that in oxidising conditions (surface waters), the dominant arsenic species is As^V. However, data from the SPE methodology suggests that As^III is the prevalent species in San Juan, indicating a greater influence from reductive processes. La Pampa groundwater had As^III and As^V concentrations of 5–1,332 μg l^?1 and 0.09–592 μg l^?1 for EC and 32–242 μg l^?1 and 30–277 μg l^?1 As for LU, respectively. Detectable levels of MA^V were reported in both provinces up to a concentration of 79 μg l^?1 (equating to up to 33% of the total arsenic). Previously published literature has focused primarily on the inorganic arsenic species, however this study highlights the potentially significant concentrations of organoarsenicals present in natural waters. The potential for separating and preserving individual arsenic species in the field to avoid transformation during transport to the laboratory, enabling an accurate assessment of in situ arsenic speciation in water supplies is discussed.     

Use of DNA barcoding to reveal species composition of convenience seafood

Increased education of consumers can be an effective tool for conservation of commercially harvested marine species when product labeling is accurate and allows an informed choice. However, generic labeling (e.g., as white fish or surimi) and mislabeling of seafood prevents this and may erode consumer confidence in seafood product labels in general. We used DNA barcoding to identify the species composition of two types of convenience seafood (i.e., products processed for ease of consumption): fish fingers (long pieces of fish covered with bread crumbs or batter, n = 241) and seafood sticks (long pieces of cooked fish, n = 30). In products labeled as either white fish or surimi, four teleost species were present. Less than 1.5% of fish fingers with species-specific information were mislabeled. Results of other studies show substantially more mislabeling (e.g., >25%) of teleost products, which likely reflects the lower economic gains associated with mislabeling of convenience seafood compared with whole fillets. In addition to species identification, seafood product labels should be required to contain information about, for example, harvesting practices, and our data indicate that consumers can have reasonable confidence in the accuracy of the labels of convenience seafood and thus select brands on the basis of information about current fisheries practice.     

Variability in the chemistry of private drinking water supplies and the impact of domestic treatment systems on water quality

Tap water from 497 properties using private water supplies, in an area of metalliferous and arsenic mineralisation (Cornwall, UK), was measured to assess the extent of compliance with chemical drinking water quality standards, and how this is influenced by householder water treatment decisions. The proportion of analyses exceeding water quality standards were high, with 65 % of tap water samples exceeding one or more chemical standards. The highest exceedances for health-based standards were nitrate (11 %) and arsenic (5 %). Arsenic had a maximum observed concentration of 440 µg/L. Exceedances were also high for pH (47 %), manganese (12 %) and aluminium (7 %), for which standards are set primarily on aesthetic grounds. However, the highest observed concentrations of manganese and aluminium also exceeded relevant health-based guidelines. Significant reductions in concentrations of aluminium, cadmium, copper, lead and/or nickel were found in tap waters where households were successfully treating low-pH groundwaters, and similar adventitious results were found for arsenic and nickel where treatment was installed for iron and/or manganese removal, and successful treatment specifically to decrease tap water arsenic concentrations was observed at two properties where it was installed. However, 31 % of samples where pH treatment was reported had pH < 6.5 (the minimum value in the drinking water regulations), suggesting widespread problems with system maintenance. Other examples of ineffectual treatment are seen in failed responses post-treatment, including for nitrate. This demonstrates that even where the tap waters are considered to be treated, they may still fail one or more drinking water quality standards. We find that the degree of drinking water standard exceedances warrant further work to understand environmental controls and the location of high concentrations. We also found that residents were more willing to accept drinking water with high metal (iron and manganese) concentrations than international guidelines assume. These findings point to the need for regulators to reinforce the guidance on drinking water quality standards to private water supply users, and the benefits to long-term health of complying with these, even in areas where treated mains water is widely available.     

Successful de-fragmentation of woodland by planting in an agricultural landscape? An assessment based on landscape indicators

Habitat fragmentation is the focus of much conservation concern and associated research. In some countries, such as Britain, the main phase of fragmentation occurred centuries ago and the focus of conservation management is now on restoration and recovery. Scenario studies have suggested that spatial targeting is preferable if landscape scale restoration is to be achieved, and that this should bring greater benefits than site-focussed activities but this has rarely been tested in practice. In Britain, woodland expansion has been encouraged through a number of financial incentives, which have evolved from instruments that encouraged almost any addition to the potential woodland resource, to grant schemes that have set out to restore connectivity to remnant ancient woodland. This study assessed the degree of de-fragmentation achieved by woodland expansion on the Isle of Wight and in particular the success of spatial targeting of new woodland planting implemented through grant aid in the JIGSAW (Joining and Increasing Grant Scheme for Ancient Woodland) scheme. Five steps in the re-development of broad-leaved woodland were tested using eight indicators - six commonly used landscape metrics, and two ecologically scaled indicators derived from application of least-cost network evaluation. Only half of the measures indicated de-fragmentation over the whole sequence of five steps. However, the spatial targeting did appear successful, when compared to equivalent untargeted grant-aided woodland expansion, and resulted in positive change to six of the eight indicators. We discuss the utility of the indicators and ways in which future targeting could be supported by their application.     

Influence of storage and release on particle emissions from new and used CRTs

This paper describes the results of three experiments performed with Continuously Regenerating Traps (CRTs^®) in a controlled laboratory setting to elucidate the effects of fuel sulfur content, filter age, and storage and release effects on particle concentration. In the first experiment, a new CRT was tested using near zero sulfur Fischer-Tropsch fuel and low sulfur lubricating oil (420 ppm). The objective was to measure particle emissions from an emission control device that had not previously been exposed to sulfur under a variety of operating and dilution conditions. Next, a used CRT was evaluated using the same fuel and lubricating oil. Finally, the used uncatalyzed Diesel particulate filter (DPF) from the used CRT was replaced with a new, uncatalyzed DPF. The emissions from the used Diesel oxidation catalyst (DOC) + new DPF were evaluated and compared to those of the used CRT.Our laboratory results show that particle number emissions from the new CRTs are 99.9% lower than equivalent used CRT data collected on-road at an exhaust temperature of 370 °C. Even as the new CRT temperature was increased to almost 400 °C, emission levels were still at background levels for roadway aerosol and no nucleation mode was observed. With the used CRT, the nucleation mode particle number concentration increased sharply at an exhaust temperature of about 380 °C and remained high for the duration of the test. Mass emissions were estimated and found to exceed US EPA on-road standards. The used DOC + new DPF led to essentially the same number emissions as the used CRT, suggesting that these emissions arise mainly from release of sulfates stored by the DOC and not the uncatalyzed DPF.     

The effects of elevated carbon dioxide levels on a Vibrio sp. isolated from the deep-sea

Introduction

The effect of oceanic CO₂ sequestration was examined exposing a deep-sea bacterium identified as Vibrio alginolyticus (9NA) to elevated levels of carbon dioxide and monitoring its growth at 2,750 psi (1,846 m depth).

Findings

The wild-type strain of 9NA could not grow in acidified marine broth below a pH of 5. The pH of marine broth did not drop below this level until at least 20.8 mM of CO₂ was injected into the medium. 9NA did not grow at this CO₂ concentration or higher concentrations (31.2 and 41.6 mM) for at least 72 h. Carbon dioxide at 10.4 mM also inhibited growth, but the bacterium was able to recover and grow. Exposure to CO₂ caused the cell to undergo a morphological change and form a dimple-like structure. The membrane was also damaged but with no protein leakage.     

Arsenic speciation in field-collected and laboratory-exposed earthworms Lumbricus terrestris

Mature Lumbricus terrestris were host soils and leaf litter were collected from a former arsenic mine in Devon, UK (Devon Great Consols), a former gold mine in Ontario, Canada (Deloro), and an uncontaminated residential garden in Nottingham, UK. Arsenic concentrations determined by inductively coupled plasma-mass spectrometry (ICP-MS) in soils were 16-348 mg kg⁻¹, 6.0-239 mg kg⁻¹ in the earthworms and 8.6 mg kg⁻¹ in leaf litter sampled at Deloro (all dry weight). High performance liquid chromatography (HPLC-ICP-MS) analysis revealed arsenite (As^III), arsenate (As^V) and five organoarsenic species; arsenobetaine (AB), methylarsonate (MA^V), dimethylarsinate (DMA^V), arsenosugar 1 (glycerol sugar), arsenosugar 2 (phosphate sugar), and trimethylarsineoxide (TMAO) in field-collected L. terrestris. Differences were observed in the variety of organoarsenic species present between field sites. Several organoarsenic species were observed in the leaf litter (DMA^V, arsenosugar 2 and TMAO) but not AB. Depuration resulted in higher concentrations of inorganic As being detected in the earthworm whereas the concentration or variety of organoarsenic species was unchanged. Commercially sourced L. terrestris were exposed to As contaminated soil in laboratory mesocosms (1.0, 98, 183, 236, 324 and 436 mg kg⁻¹) without leaf litter and were additionally analyzed using X-ray absorption near edge structure (XANES). Only inorganic As^III and As^V was observed. It is proposed that ingestion of leaf litter and symbiotic processes in the natural soil environment are likely sources of organoarsenic compounds in field-collected L. terrestris.     

Impact of the earthworm Lumbricus terrestris (L.) on As, Cu, Pb and Zn mobility and speciation in contaminated soils

To assess the risks that contaminated soils pose to the environment properly a greater understanding of how soil biota influence the mobility of metal(loid)s in soils is required. Lumbricus terrestris L. were incubated in three soils contaminated with As, Cu, Pb and Zn. The concentration and speciation of metal(loid)s in pore waters and the mobility and partitioning in casts were compared with earthworm-free soil. Generally the concentrations of water extractable metal(loid)s in earthworm casts were greater than in earthworm-free soil. The impact of the earthworms on concentration and speciation in pore waters was soil and metal specific and could be explained either by earthworm induced changes in soil pH or soluble organic carbon. The mobilisation of metal(loid)s in the environment by earthworm activity may allow for leaching or uptake into biota.