Influence of storage and release on particle emissions from new and used CRTs

This paper describes the results of three experiments performed with Continuously Regenerating Traps (CRTs^®) in a controlled laboratory setting to elucidate the effects of fuel sulfur content, filter age, and storage and release effects on particle concentration. In the first experiment, a new CRT was tested using near zero sulfur Fischer-Tropsch fuel and low sulfur lubricating oil (420 ppm). The objective was to measure particle emissions from an emission control device that had not previously been exposed to sulfur under a variety of operating and dilution conditions. Next, a used CRT was evaluated using the same fuel and lubricating oil. Finally, the used uncatalyzed Diesel particulate filter (DPF) from the used CRT was replaced with a new, uncatalyzed DPF. The emissions from the used Diesel oxidation catalyst (DOC) + new DPF were evaluated and compared to those of the used CRT.Our laboratory results show that particle number emissions from the new CRTs are 99.9% lower than equivalent used CRT data collected on-road at an exhaust temperature of 370 °C. Even as the new CRT temperature was increased to almost 400 °C, emission levels were still at background levels for roadway aerosol and no nucleation mode was observed. With the used CRT, the nucleation mode particle number concentration increased sharply at an exhaust temperature of about 380 °C and remained high for the duration of the test. Mass emissions were estimated and found to exceed US EPA on-road standards. The used DOC + new DPF led to essentially the same number emissions as the used CRT, suggesting that these emissions arise mainly from release of sulfates stored by the DOC and not the uncatalyzed DPF.     

A habitat‐based approach to predict impacts of marine protected areas on fishers

Although marine protected areas can simultaneously contribute to biodiversity conservation and fisheries management, the global network is biased toward particular ecosystem types because they have been established primarily in an ad hoc fashion. The optimization of trade‐offs between biodiversity benefits and socioeconomic values increases success of protected areas and minimizes enforcement costs in the long run, but it is often neglected in marine spatial planning (MSP). Although the acquisition of spatially explicit socioeconomic data is perceived as a costly or secondary step in MSP, it is critical to account for lost opportunities by people whose activities will be restricted, especially fishers. We developed an easily reproduced habitat‐based approach to estimate the spatial distribution of opportunity cost to fishers in data‐poor regions. We assumed the most accessible areas have higher economic and conservation values than less accessible areas and their designation as no‐take zones represents a loss of fishing opportunities. We estimated potential distribution of fishing resources from bathymetric ranges and benthic habitat distribution and the relative importance of the different resources for each port of total catches, revenues, and stakeholder perception. In our model, we combined different cost layers to produce a comprehensive cost layer so that we could evaluate of trade‐offs. Our approach directly supports conservation planning, can be applied generally, and is expected to facilitate stakeholder input and community acceptance of conservation.     

High levels of genetic subdivision in peripherally isolated populations of the atherinid fish Craterocephalus capreoli in the Houtman Abrolhos Islands,Western Australia

The atherinid fish Craterocephalus capreoli Rendahl is abundant in the Houtman Abrolhos Islands, 70 km off the Western Australia coast and 250 km south of the southern limit of the range of the species along the mainland. Electrophoretic examination of 7 allozyme loci at 17 sites in the Houtman Abrolhos revealed a substantially lower level of polymorphism than found in an earlier study of the species in its mainland distribution, with many of the uncommon alleles and some common ones missing. There is a very high degree of genetic subdivision among the populations in the Houtman Abrolhos, measured by a mean F _ST of 0.437 over a distance of 35 km. This F _ST (standardized variance in allelic frequencies) is six times that found previously among populations along the mainland coast over distances up to 850 km. The subdivision of populations in the Houtman Abrolhos is similar within one island group on a scale up to 12 km, and between two groups that are separated by 15 km of deep water. Significant differences in allelic frequencies were found between populations from the open shore and enclosed lagoons less than 800 m apart, but the overall levels of subdivision were similar for the two types of environment. Previous work had shown high levels of genetic subdivision in the Houtman Abrolhos for a gastropod with direct development. The results for C. capreoli demonstrate that the archipelago favours subdivision even for a species with potentially much greater mobility and different life history.     

Disinfection of secondary effluents using tin oxide anodes.

Direct current applied to a tin oxide anode submersed in water has the potential to generate hydroxyl radicals, a strong chemical oxidant. Tin oxide anode systems, which may represent a viable alternative disinfectant, were investigated for the disinfection of secondary effluents. Coliform bacteria in the effluent were effectively inactivated in a bench-scale tin oxide disinfection system. The number of anodes in the tin oxide disinfection system influenced the steady-state concentration of hydroxyl radicals and, consequently, the contact time necessary to achieve a specified dose. The life expectancy of the anodes was greater than 30 days and no appreciable loss of tin was observed over a 5-day period. A preliminary estimate of the capital and operating costs of a pilot- or full-scale tin oxide disinfection system designed to meet a discharge requirement of 23 most probable number/100 mL at a 3 785-m3/d (1-mgd) facility was comparable to UV and chlorination/dechlorination facilities. Based on this preliminary assessment, tin oxide disinfection systems are a promising alternative disinfectant for secondary effluents.     

Evaluating an Employer Transport Plan: effects on travel behaviour of parking charges and associated measures introduced at the University of Sheffield

Journeys to work form a significant proportion of all car journeys and employer transport plans have been advocated as a way to manage the transport needs of workers in order to contain the level of car trips and, therefore, emissions and other negative effects. A questionnaire survey and focus group interviews were used to evaluate the success of an employer transport plan implemented by the University of Sheffield in September 1997. The policy was associated with a marginal (7%) reduction in car use and promoted a limited increase in travel diversity. An objection to the principle of paying to park at work and ineligibility for a permit both deterred car use. The policy caused a re-evaluation of the journey to work. Nevertheless, a number of factors worked against switches in behaviour, particularly employees' perceptions of the university's motivation for introducing the plan and attitudes towards car use and public transport. Disincentives to car use need to be much more significant to persuade more employees to leave their car at home, and need to be tied to substantial improvements in the availability of non-car alternatives.     

Sustainable remediation panel—Measuring the social and economic benefits of a sustainable remediation project

Remediation developed a Sustainable Remediation Panel in the Summer 2009 issue, which featured the Sustainable Remediation Forum White Paper. The panel is composed of leaders in the field of sustainable remediation who have volunteered to provide their opinions on difficult subjects related to the topic of how to integrate sustainability principles into the remediation practice. The panel's opinions are provided in a question‐and‐answer format, whereby selected experts provide an answer to a question. This issue's question is provided below, followed by opinions from five experts in the remediation field.

相似文献   

Alternatives to the gravimetric method for quantification of diesel particulate matter near the lower level of detection

This paper is part of the Journal of the Air & Waste Management Association's 2010 special issue on combustion aerosol measurements. The issue is a combination of papers that synthesize and evaluate ideas and perspectives that were presented by experts at a series of workshops sponsored by the Coordinating Research Council that aimed to evaluate the current and future status of diesel particulate matter (DPM) measurement. Measurement of DPM is a complex issue with many stakeholders, including air quality management and enforcement agencies, engine manufacturers, health experts, and climatologists. Adoption of the U.S. Environmental Protection Agency 2007 heavy-duty engine DPM standards posed a unique challenge to engine manufacturers. The new standards reduced DPM emissions to the point that improvements to the gravimetric method were required to increase the accuracy and the sensitivity of the measurement. Despite these improvements, the method still has shortcomings. The objectives of this paper are to review the physical and chemical properties of DPM that make gravimetric measurement difficult at very low concentrations and to review alternative metrics and methods that are potentially more accurate, sensitive, and specific. Particle volatility, size, surface area, and number metrics are considered, as well as methods to quantify them. Although the authors believe that an alternative method is required to meet the needs of engine manufacturers, the methods reviewed in the paper are applicable to other areas where the gravimetric method detection limit is approached and greater accuracy and sensitivity are required. The paper concludes by suggesting a method to measure active surface area, combined with a method to separate semi-volatile and solid fractions to further increase the specificity of the measurement, has potential for reducing the lower detection limit of DPM and enabling engine manufacturers to reduce DPM emissions in the future.     

Liver lesions in demersal fishes near a large ocean outfall on the San Pedro Shelf, California

The prevalence of toxicopathic liver lesions in demersal fish on the San Pedro Shelf, California was determined for a 15-year period (1988–2003). Fish livers were sampled at fixed locations as part of the Orange County Sanitation Districts (OCSD) ocean monitoring program. Histopathological examination of selected fish liver tissues was studied to determine whether the wastewater discharge had affected fish health. The prevalence of toxicopathic lesion classes neoplasms (NEO), preneoplastic foci of cellular alteration (FCA), and hydropic vacuolation (HYDVAC) varied among species and locations. For all species sampled, severe lesions occurred in 6.2% of the fish examined (n = 7,694). HYDVAC (4.1%) was the most common toxicopathic lesion type followed by FCA (1.4%) and NEO (0.7%). HYDVAC occurred only in white croaker (Genyonemus lineatus), accounting for 84.8% of the toxicopathic lesions for this species. Prevalence of HYDVAC, NEO, and FCA in white croaker was 15.2, 2.0, and 0.7%, respectively. The prevalence of HYDVAC and NEO in white croaker increased with age and size but there was no sexual difference. A linear regression model was used for hypothesis testing to account for significant differences in fish size (and age for croakers) at the different sampling locations. This analysis showed that for HYDVAC there was no spatial or location effect for lesion rate or size/age of onset. For NEO, the model predicted that white croaker near the wastewater outfall may acquire these lesions at a smaller size/younger age, and at a higher rate, than at other sites. However, this result may be biased due to the unequal size frequency distributions and the low prevalence of NEO in white croaker at the different sampling sites. Bigmouth sole (Hippoglossina stomata) had a prevalence of FCA and NEO of 1.3 and 0.35%, respectively, but the prevalence and distribution of lesions was too few for statistical testing. There was no sexual difference for lesion prevalence in hornyhead turbot (Pleuronichthys verticalis) and the prevalence of FCA and NEO was 3.4 and 0.37%, respectively. FCA prevalence increased with size in hornyhead turbot and there were no significant spatial differences for lesion rates and fish size at lesion onset. Overall, consistent spatial differences for lesion prevalence were not demonstrated and highlight the analytical difficulties of detecting a possible point source impact when the effect is rare, correlated with the size/age structure of the population, and may be caused by exposure to unknown multiple sources. Thus, the usefulness of liver histopathology as a point-source monitoring tool is best applied to where the spatial scale of impact generally exceeds the home range of the target species.     

Elemental composition of Malawian rice

Widespread potential dietary deficiencies of calcium (Ca), iron (Fe), iodine (I), selenium (Se) and zinc (Zn) have been identified in Malawi. Several deficiencies are likely to be compounded by high phytic acid (PA) consumption. Rice (Oryza sativa) is commonly consumed in some Malawian populations, and its mineral micronutrient content is important for food security. The considerable irrigation requirements and flooded conditions of paddy soils can also introduce or mobilise potentially toxic elements including arsenic (As), cadmium (Cd) and lead (Pb). The aim of this study was to determine the mineral composition of rice sampled from farmers’ fields and markets in Malawi. Rice was sampled from 18 extension planning areas across Malawi with 21 white (i.e. polished) and 33 brown samples collected. Elemental composition was determined by inductively coupled plasma-mass spectrometry (ICP-MS). Arsenic speciation was performed using high-performance liquid chromatography (HPLC)-ICP-MS. Concentration of PA was determined using a PA-total phosphorus assay. Median total concentrations (mg kg^?1, dry weight) of elements important for human nutrition in brown and white rice, respectively, were: Ca = 66.5 and 37.8; Cu = 3.65 and 2.49; Fe = 22.1 and 7.2; I = 0.006 and <0.005; Mg = 1130 and 265; Mn = 18.2 and 9.6; Se = 0.025 and 0.028; and Zn = 17.0 and 14.4. In brown and white rice samples, respectively, median PA concentrations were 5438 and 1906 mg kg^?1, and median PA:Zn molar ratios were 29 and 13. Concentrations of potentially toxic elements (mg kg^?1, dry weight) in brown and white rice samples, respectively, were: As = 0.030 and 0.006; Cd  ≤ 0.002 and 0.006; Pb = 0.008 and 0.008. Approximately 95 % of As was found to be inorganic As, where this could be quantified. Malawian rice, like the more widely consumed staple grain maize, contains inadequate Ca, I, Se or Zn to meet dietary requirements. Biofortification strategies could significantly increase Se and Zn concentrations and require further investigation. Concentrations of Fe in rice grain varied greatly, and this was likely due to contamination of rice samples with soil. Risk of As, Cd or Pb toxicity due to rice consumption in Malawi appears to be minimal.