氮氟掺杂二氧化钛(N,F-TiO2)的制备及可见光催化活性的研究

以氨水为氮源,氢氟酸为氟源,采用溶胶-凝胶法制备了氮氟掺杂二氧化钛(N,F-TiO2)光催化剂,并通过X-射线衍射(XRD)和扫描电镜(SEM)技术对其晶型和形态进行表征.最后以酸性红B为模型污染物,探讨了N和F加入量、焙烧温度、焙烧时间、照射时间、催化剂用量、溶液初始浓度和照射功率等因素对N,F-TiO2可见光催化活性的影响.结果表明,制备的N,F-TiO2以锐钛型为主,N和F的掺杂对TiO2的晶相没有明显改变,但可以扩大TiO2的可见光响应范围.当N和F的加入量均为2.0%,且在500℃下焙烧40 min时,得到的N,F-TiO2的可见光催化活性明显高于单N或单F掺杂的TiO2(N-TiO2或F-TiO2).对于50 mL浓度为10.0 mg·L-1的酸性红B溶液,当催化剂加入量为1.5 g·L-1,128W光照3.0 h,溶液pH=5.6时,去除率为85.40%.适当延长光照时间至4.0 h,降解率几乎可达100%.另外,研究还证明了N,F-TiO2催化可见光降解过程中有.OH自由基生成.     

基于能源-环境情景模拟的北京市大气污染对居民健康风险评价研究

保护居民健康是北京市能源系统优化管理和大气污染治理的重要目标.本研究基于北京市的社会经济发展目标并结合相关节能减排和环保要求,针对全市2010-2020年间的能源消费分别设计了高、中、低3种约束情景,通过LEAP模型预测了全市至2020年的能源消费量与S02、NOx、PM10和PM2.5等4种主要大气污染物的排放强度,并采用泊松回归模型对3种情景下主城区居民受环境空气中这4种大气污染物的暴露危害所导致的健康风险进行了评估.结果显示:相对低约束情景,高约束情景至2020年可避免与S02、NOx、PM10和PM2.5污染相关的死亡危害分别为2663、6359、4720和4104人·a-1,而且在高约束情景下煤炭消费比重每下降1％,可相应地避免约1400人·a-1的污染急性死亡.由此建议北京市实施更加严格的节能和减排措施,严控煤炭消费总量,进一步优化能源结构,最大程度地降低能源消费导致的大气污染所产生的居民健康风险.     

沉积物中雌激素及壬基酚、辛基酚、双酚A的测定

近些年来雌激素及烷基酚类化合物由于其对水生生物的内分泌干扰作用越来越受到广泛关注.沉积物作为环境中有机污染物的重要储存库,研究目标物在其中的浓度分布对于探明此类物质在环境中的迁移转化具有重要意义.但沉积物中基质组成复杂而雌激素又痕量存在,这增加了前处理的难度.本研究从雌激素及烷基酚类化合物的理化性质入手,采用碱液提取、液液萃取和LC-MS/MS分析测定沉积物样品中的雌激素及壬基酚、辛基酚、双酚A.结果表明,经过优化的方法对7种目标物的回收率介于61.9%～93.7%之间.该方法能有效去除沉积物中那些不溶于强碱和既溶于酸又溶于碱的有机污染物,同时操作简单、成本低,但回收率高、检出限低,可广泛适用于河流沉积物样品及土壤样品的前处理.     

东北三省畜禽养殖类固醇激素排放及其潜在污染风险

以东北三省畜禽养殖数量统计数据和养殖结构分析为基础,对黑龙江、吉林和辽宁省畜禽养殖类固醇激素排放量进行了估算,并初步探讨了畜禽粪便中类固醇激素对当地水体的潜在污染风险.结果表明,由于养殖数量的增加,东北三省畜禽粪便所排放的类固醇激素量均持续增大.在1998～2008年的10 a间,辽宁、吉林和黑龙江三省的类固醇激素排放量分别增长了2 272.7、1 951.1和1 634.8 kg,并且省会城市沈阳、长春和哈尔滨的增长最为明显.东北三省各城市中畜禽粪便类固醇雌激素排放量最大的是长春,达到874.7 kg;哈尔滨和沈阳的排放量在各自省份中也是最大,分别为652.7 kg和603.1 kg·辽宁省的畜禽类固醇激素排放总量在东北三省为最多,所排放类固醇雌激素的雌二醇等当量浓度EEQs预测值也最高,达到17.1ng·L-1.如果以英国环保署(Environment Agency,United Kingdom)建议的最低可观测效应浓度10 ng·L-1为参考依据,辽宁省在目前的畜禽养殖规模和结构下,所排放的粪便类固醇雌激素极有可能会对地表水体中的水生生物产生内分泌干扰效应.     

Cost-performance analysis of nutrient removal in a full-scale oxidation ditch process based on kinetic modeling

A full-scale oxidation ditch process for treating sewage was simulated with the ASM2d model and optimized for minimal cost with acceptable performance in terms of ammonium and phosphorus removal. A unified index was introduced by integrating operational costs (aeration energy and sludge production) with effluent violations for performance evaluation. Scenario analysis showed that,in comparison with the baseline (all of the 9 aerators activated), the strategy of activating 5 aerators could save aeration energy significantly with an ammonium violation below 10%. Sludge discharge scenario analysis showed that a sludge discharge flow of 250–300 m3/day (solid retention time (SRT), 13–15 days) was appropriate for the enhancement of phosphorus removal without excessive sludge production. The proposed optimal control strategy was: activating 5 rotating disks operated with a mode of "111100100" ( "1"represents activation and "0" represents inactivation) for aeration and sludge discharge flow of 200 m3/day (SRT, 19 days). Compared with the baseline, this strategy could achieve ammonium violation below 10% and TP violation below 30% with substantial reduction of aeration energy cost (46%) and minimal increment of sludge production (< 2%). This study provides a useful approach for the optimization of process operation and control.     

循环半干法技术净化垃圾焚烧炉尾气

垃圾焚烧已在全国各地兴起,人们一直对其引起的大气污染问题十分关注,其中尾部烟气净化是防治大气污染的最重要环节,分析了富春环保热电股份有限公司的垃圾焚烧炉循环半干法烟气净化工艺、设计指标、运行效果。     

以废气为热源生产二水氯化钙的新工艺

针对在氯化法生产钛白粉的过程中产生的大量高热值废气和氯化钙废水,提出以废气为热源生产二水氯化钙的新工艺。以焚烧的方式处理氯化尾气,将产生的热量用于浓缩蒸发氯化钙废水,生产工业级二水氯化钙产品,达到以废治废的目的。不仅处理了工业废气和废水,在节约能源的同时创造了一定的经济效益。     

不同石化污泥配比的堆肥处理对青梗菜生长的影响

试验针对石化污泥生物堆肥,开展了五种不同物料配比和是否添加微生物菌剂的对比试验。试验结果表明:随着堆肥物料中石化污泥配比的提高,堆肥的含水率增大,种植青梗菜的平均单株株高、株重减小,单位面积产量也降低。堆肥物料配比相同的处理Ⅱ与处理Ⅴ对比发现,堆肥处理过程中未添加微生物菌剂的处理Ⅴ的青梗菜的平均单株株高、株重、单位面积产量显著低于添加微生物菌剂的处理Ⅱ,甚至低于石化污泥配比为100%并添加微生物菌剂的处理Ⅳ,试验表明,堆肥过程中添加微生物菌剂,其作用不仅可以提高石化污泥生物堆肥的堆体温度,缩短堆肥周期,而且可提高堆肥在农业种植应用中的效果。     

明胶厂剩余高钙污泥作为燃煤固硫剂的应用研究

明胶生产产业在废水处理工艺中产生大量剩余高钙污泥,采用该剩余污泥作为燃煤固硫剂,在高温管式电阻炉内进行燃烧实验,通过测定燃烧前和燃烧后样品中的硫含量确定该剩余污泥的固硫效果。通过单因素研究煤粉粒径、剩余污泥粒径和剩余污泥/煤样%等影响因素对固硫率的影响。在单因素试验的基础上通过正交设计法优选达到较高固硫率的实验条件。实验结果表明:影响固硫率的因素从大到小依次为燃烧温度>剩余污泥/煤样%>煤粉粒径>剩余污泥粒径。以剩余污泥作为固硫剂,固硫率最高的实验条件为:燃烧温度800℃,剩余污泥/煤样为3%,煤粉粒径60⁹0目,剩余污泥粒径9090目,剩余污泥粒径90¹20目。并且,当温度达到1150℃,煤粉粒径90120目。并且,当温度达到1150℃,煤粉粒径90¹20目,剩余污泥粒径为60120目,剩余污泥粒径为60⁹0目,污泥/煤样(质量比)为3%时,固硫率可达62.78%,说明在高温下该剩余污泥保持较高的固硫率。将明胶厂剩余污泥作为固硫剂是较为合适的再利用方法,可有效缓解当前该污泥大量堆积污染环境的状况。     

Waste oyster shell as a kind of active filler to treat the combined wastewater at an estuary

Estuaries have been described as one of the most difficult environments on Earth. It is difficult to know how to treat the combined wastewater in tidal rivers at the estuary, where the situation is very different from ordinary fresh water rivers. Waste oyster shell was used as the active filler in this study in a bio-contact oxidation tank to treat the combined wastewater at the Fengtang Tidal River. With a middle-experimental scale of 360 ma/day, the average removal efficiency of COD, BOD, NH3-N, TP and TSS was 80.05%, 85.02%, 86.59%, 50.58% and 85.32%, respectively, in this bio-contact oxidation process. The living microbes in the biofilms on the waste oyster shell in this bio-contact oxidation tank, which were mainly composed of zoogloea, protozoa and micro-metazoa species, revealed that waste oyster shell as the filler was suitable material for combined wastewater degradation. This treatment method using waste oyster shell as active filler was then applied in a mangrove demonstration area for water quality improvement near the experiment area, with a treatment volume of 5 × 10^3 m^3/day. Another project was also successfully applied in a constructed wetland, with a wastewater treatment volume of 1 ×10^3 m^3/day. This technology is therefore feasible and can easily be applied on a larger scale,