4种高级氧化法处理高浓度正丙醇废水的动力学比较

研究了1%和10%(V/V)模拟正丙醇废水在UV/TiO2体系、UV/H2O2体系、Fe2+/H2O2体系和UV/TiO2/Fe2+/H2O2体系等4种工艺条件下的降解动力学过程,对比了降解动力学特点及工艺参数对动力学常数的影响,优化工艺参数。结果表明,UV/TiO2体系和Fe2+/H2O2体系的降解过程可分为零级反应阶段和一级反应阶段,转折点分别在反应开始后2 h和氧化剂浓度为6.7 g/L,UV/H2O2体系和UV/TiO2/Fe2+/H2O2体系分别符合零级反应和一级反应规律;相同工艺参数条件下,6 h反应后,组合工艺UV/TiO2/Fe2+/H2O2体系在处理效率达85%,比前3个体系分别高52.0%、8.3%和32.0%,与UV/TiO2体系和Fe2+/H2O2体系的处理效率之和持平,其协同效应提高了速率常数,在目标物浓度降低时依然可维持较高降解速率。而目标物浓度提高10倍后,UV能量利用率提高35.5倍,氧化剂用量是Fe2+/H2O2体系的1/7.1。     

电增强载铝活性炭纤维吸附氟离子性能

以载铝活性炭纤维毡为电极,在电场作用条件下对模拟含氟水进行静态吸附实验。结果表明,该载铝活性炭纤维毡正极化可以强化吸附除氟效果,吸附动力学数据很好地符合Lagergren二级速率方程,加电场时二级反应速率常数为4.50 g/(mg·h);其对高浓度含氟饮用水也有较高去除率,Freundlich吸附等温方程能很好地描述吸附平衡数据。加电场情况下,该载铝炭毡对氟离子的最大吸附量为16.584 mg/g,去除氟离子的最佳pH范围是5.5~8.9。共存阴离子Cl-、SO2-4和NO-3对炭毡吸附除氟没有抑制作用,但CO2-3的存在会导致除氟吸附量显著下降。     

Influence of lead acetate on soil microbial biomass and community structure in two different soils with the growth of Chinese cabbage (Brassica chinensis)

A greenhouse pot experiment was conducted to evaluate the impact of different concentrations of lead acetate on soil microbial biomass and community structure during growth of Chinese cabbage (Brassica chinensis) in two different soils. The field soils were used for a small pot, short-term 60-day growth chamber study. The soils were amended with different Pb concentrations, ranging from 0 to 900mgkg(-1) soil. The experimental design was a 2 soilx2 vegetation/non-vegetationx6 treatments (Pb)x3 replicate factorial experiment. At 60 days the study was terminated and soils were analyzed for microbial parameters, namely, microbial biomass, basal respiration and PLFAs. The results indicated that the application of Pb at lower concentrations (100 and 300mgkg(-1)) as lead acetate resulted in a slight increase in soil microbial biomass, whereas Pb concentrations >500mgkg(-1) caused an immediate gradual significant decline in biomass. However, the degree of impact on soil microbial biomass and basal respiration by Pb was related to management (plant vegetation) or the contents of clay and organic matter in soils. The profiles of 21 phospholipid fatty acids (PLFAs) were used to assess whether observed changes in functional microbial parameters were accompanied by changes in the composition of the microbial communities after Pb application at 0, 300 and 900mg Pbkg(-1) soil. The results of principal component analyses (PCA) indicated that there were significant increases in fungi biomarkers of 18:3omega6c, 18:1omega9c and a decrease in cy17:0, which is an indicator of gram-negative bacteria for the high levels of Pb treatments In a word, soil microbial biomass and community structure, therefore, may be sensitive indicators reflecting environmental stress in soil-Pb-plant system. However, further studies will be needed to better understand how these changes in microbial community structure might actually impact soil microbial community function.     

Removal of Pb and MDF from contaminated soils by EDTA- and SDS-enhanced washing

Heavy metal- and organic-contaminated sites are ubiquitous, but few studies have been conducted to address such an issue. EDTA- and SDS-enhanced washing was studied for remediation of Pb- and/or marine diesel fuel (MDF)-contaminated soils. The feasibility of recovery and reuse of EDTA and SDS, as well as the physicochemical interactions among the chemical agents, contaminants and soils were extensively investigated using batch experiments. The optimal washing sequence was then determined. The experimental results showed that EDTA could be recovered and reused for four cycles without significant loss of its chelating capacity, while the extraction capability of SDS was noticeably reduced after each reuse cycle. The free phase of marine diesel fuel (MDF) in soils physically isolated the sorbed Pb on soils and thus reducing its extraction by EDTA. The presence of SDS alone or together with low concentration of EDTA was found to enhance Pb removal probably via electrostatic interaction and dissolution of soil organic matter. However, it hindered Pb extraction by high concentration of EDTA, because of the potential formation of complexes between some strongly-bound Pb and SDS, that are more resistant to desorption. Therefore, EDTA washing followed by SDS achieved the highest Pb removal efficiency. On the other hand, MDF removal by SDS was significantly hindered by coexisting Pb in soils, probably because the formation of Pb-dodecyl sulfate (DS) complex would decrease the effective amount of SDS available for forming micelles in solution and enhance MDF sorption. EDTA alone or together with SDS could enhance MDF removal, but the residual MDF after EDTA-washing became more resistant to SDS removal. Consequently, SDS washing followed by EDTA is considered as the optimal washing sequence for MDF removal.     

Effect of condensed organic matter on solvent extraction and aqueous leaching of polycyclic aromatic hydrocarbons in soils and sediments

The contents of nonhydrolyzable organic matter (NHC) and black carbon (BC) were measured in soils and sediments from the Pearl River Delta, South China. Polycyclic aromatic hydrocarbons (PAHs) were extracted respectively by Soxhlet and an accelerated solvent extraction device (ASE) using different solvents. In addition, sequential aqueous leaching at different temperatures was carried out. The PAH content extracted with the sequential three solvent ASE is two times higher than that using the Soxhlet extraction method. The relationship of the PAH content with the NHC content is very significant. The PAH concentrations measured at various temperature steps fit well to the Van't Hoff equation and the enthalpy was estimated. The investigation indicates that condensed organic matter such as kerogen carbon, aged organic matter, and BC is relevant for the extraction and distribution of native PAHs in the investigated field soils and sediments.     

A fuzzy composting process model

Composting processes are normally complicated with a variety of uncertainties arising from incomplete or imprecise information obtained in real-world systems. Previously, there has been a lack of studies that focused on developing effective approaches to incorporate such uncertainties within composting process models. To fill this gap, a fuzzy composting process model (FCPM) for simulating composting process under uncertainty was developed. This model was mainly based on integration of a fractional fuzzy vertex method and a comprehensive composting model. Degrees of influence by projected uncertain factors were also examined. Two scenarios were investigated in applying the FCPM method. In the first scenario, model simulation under deterministic conditions was conducted. A pilot-scale experiment was provided for verifications. The result indicated that the proposed composting model could provide an excellent vehicle for demonstrating the complex interactions that occurred in the composting process. In the second scenario, application of the proposed FCPM was conducted under uncertainties. Six input parameters were considered to be of uncertain features that were reflected as fuzzy membership functions. The results indicated that the uncertainties projected in input parameters will result in significant derivations on system predictions; the proposed FCPM can generate satisfactory system outputs, with less computational efforts being required. Analyses on degree of influence of system inputs were also provided to describe the impacts of uncertainties on system responses. Thus, suitable measures can be adopted either to reduce system uncertainty by well-directed reduction of uncertainties of those high-influencing parameters or to reduce the computational requirement by neglecting those negligible factors.     

Linear alkylbenzenes in riverine runoff of the Pearl River Delta (China) and their application as anthropogenic molecular markers in coastal environments

The average concentrations of ∑LABs (sum of C₁₀-C₁₃-LABs) in runoff samples collected from the eight major riverine outlets of the Pearl River Delta (PRD) of China ranged from 1.4 to 6124 ng/L in the dissolved phase and from 0.01 to 11.4 μg/g dry weight in the particulate phase during March 2005-February 2006. The annual riverine flux of ∑LABs from the PRD to the coastal ocean was estimated at approximately 14 tons/yr. The inventories of ∑LABs in agricultural lands of Guangdong Province ranged from 313 to 1825 kg/yr. The early and late rice fields were the major sink of LABs, accounting for approximately 68% of total LABs inventory in agricultural lands. The social-economically estimated annual discharge of LABs from household detergents in the PRD was ∼696 tons/yr, more than an order of magnitude higher than that estimated from field measurements (about 14 tons/yr), which was attributed to several factors.     

温度和表面活性剂对菲在土壤中吸附的影响

通过静态吸附实验,研究了北京地区土壤对菲的吸附行为,考察了温度和表面活性剂对菲吸附的影响.结果表明,6种土样对菲的吸附等温线均较好地符合Freundlich吸附模式,其吸附能力的大小顺序为:轻壤土>轻粘土>砂壤土>中壤土>重壤土>紧砂土;温度升高不利于菲在土壤中的吸附;十二烷基苯磺酸钠(LAS)和十六烷基三甲基澳化铵(CTAB)均利于菲在土壤表面的解吸,LAS和CTAB对菲的解吸率最高可达66.2%和31.8%,且LAS的解吸效果更好.     

不同预处理对电镀污泥电动过程的影响

以风干电镀污泥为电动处理试验材料,水为阳极电解液,柠檬酸柠檬酸铵缓冲液为阴极电解液,施加25 V直流电压条件下电动运行5 d,研究了水、低浓度木钙和硝酸等预处理对电镀污泥电动过程的影响。结果表明,各处理的阴极电解液pH值变化平稳,都维持在3～3.5较理想的范围。而1％木钙、1％硝酸饱和预处理电镀污泥,明显改变了电动过程中电渗流和电流密度的大小,对电镀污泥Cu、Ni的去除率也有明显增加。其中,木钙、硝酸预处理后对Cu的去除率由对照的13.24％分别提高到19.05％和25.55％,即去除量分别增大3 516.35 mg/kg和7 457.62 mg/kg;木钙、硝酸预处理后对Ni的去除率由对照的14.68％分别提高到16.47％和28.85％,即去除量分别增大800.91 mg/kg和6 359.92 mg/kg。     

SBR工艺去除模拟城市污水中双酚A的研究

依次改变SBR系统(厌氧-好氧-缺氧模式)的水力停留时间(HRT)、好氧-缺氧段时间比以及污泥龄(SRT),并采用液相色谱法对系统双酚A(BPA)浓度进行了检测,从BPA去除的角度对SBR工艺进行了评估,同时对部分工艺运行参数进行了优化.结果表明,SBR工艺对BPA有较好的去除能力;在温度为20 ℃、充水比(SBR工艺1个周期中进入反应器的污水量与反应器有效容积之比)为50%的条件下,最佳的工艺运行参数为总HRT=480 min,SRT=25 d,厌氧、好氧、缺氧段HRT分别为90、150、180 min;好氧-缺氧段时间比为0.83,此时COD、TN和PO43--P的总去除率分别达到89%、69%和95%,BPA总去除率达到99%,其中厌氧、好氧、缺氧段BPA去除率分别占BPA总去除率的66%、32%和1%.BPA在上述SBR系统中的去除主要是通过厌氧段污泥吸附和好氧段的生物降解实现的.