MD三相流化床降解含酚废水的研究

以人工配制的含酚废水作为研究对象,观察新研制的ＭＤ三相流化床好氧化物处理含酚废水的效果。试验结果表明,在进水酚浓度为４１００ｍｇ／Ｌ时,ＭＤ三相流化同水酚浓度为２０ｍｇ／Ｏ－２５ｍｇ／Ｌ,其     

微滤膜与活性炭联用工艺去除富营养化水源水中藻类

湖泊及水库含藻水问题带有一定的普遍性,处理技术复杂,难度较大。因此,除藻技术的提高和发展显得越来越紧迫。膜处理技术在给水中的应用是水处理技术的重大突破,正逐渐成为21世纪水处理技术中最有发展前途的技术。本文以继承和吸收成熟技术,并将其工程化,以便及时解决具体问题为原则,根据国内外最新水质标准要求,提出了微滤膜与活性炭联用的除藻新上艺,并对除藻工艺方案确定原则、研究内容和目标,以及除藻工艺方案设计进行了说细分析说明。本文认为微滤膜技术在我国供水行业推广已经具备了较好的条件,在不断积累经验的基础上可以达到大规模工程应用。应用微滤膜与活性炭联用工艺解决富营养化水源水中藻类问题在技术上是成熟的,在经济上是可行的。     

曝气生物滤池污水处理工艺与设计

论述了曝气生物滤池污水处理原理、构造及其滤料作用机理,提供了一种利用粉煤灰和粘土生产生物滤料的配方和生产工艺流程,并对当前曝气生物滤池滤料研究进行了归纳,介绍了几种曝气生物滤池工艺基本类型及其组合流程。曝气生物滤池污水处理工艺设计与计算主要包括滤料体积、滤池总面积、滤池高度、布水布气系统、反冲洗系统以及污水与滤料的接触时间等。作为实例,对水量为2500m3d小区污水曝气生物滤池(DC、DN)进行了工艺设计。     

Moisture distribution in sludges based on different testing methods

Moisture distributions in municipal sewage sludge, printing and dyeing sludge and paper mill sludge were experimentally studied based on four different methods, i.e., drying test, thermogravimetric-differential thermal analysis (TG-DTA) test, thermogravimetricdifferential scanning calorimetry (TG-DSC) test and water activity test. The results indicated that the moistures in the mechanically dewatered sludges were interstitial water, surface water and bound water. The interstitial water accounted for more than 50% wet basis (wb) of the total moisture content. The bond strength of sludge moisture increased with decreasing moisture content, especially when the moisture content was lower than 50% wb. Furthermore, the comparison among the four different testing methods was presented.The drying test was advantaged by its ability to quantify free water, interstitial water, surface water and bound water; while TG-DSC test, TG-DTA test and water activity test were capable of determining the bond strength of moisture in sludge. It was found that the results from TG-DSC and TG-DTA test are more persuasive than water activity test.     

基本过程控制系统(BPCS)作为独立保护层的探讨

对于特定场景，识别现有的防护措施是否满足独立保护层（IPL）的要求是保护层分析技术的核心内容。基本过程控制系统（BPCS）作为一种基本保护措施，在一定的条件下可以作为一种IPL。探讨BPCS作为IPL必须满足的条件，分析同一BPCS多重功能回路作为IPL的方法、各种影响因素、限制条件、所需的专业知识和信息及注意事项。在实际运用中，必须谨慎识别同一BPCS多重功能回路作为同一场景下的多个IPL。     

不同因素对平板膜污泥浓缩工艺膜污染演变的影响研究

以临界通量表征膜污染趋势,利用响应面模型考察污泥浓度、膜间距和曝气量对上下层膜组件的膜污染影响,发现响应面模型具有较好的显著性和拟合性,且污泥浓度、膜间距和曝气量均对上下层膜组件膜污染有显著影响。同时发现,随着污泥浓度的增加上下层膜组件临界通量大幅下降;而在不同污泥浓度下,曝气量和膜间距的变化对上下层膜组件膜污染的变化有不同的影响。利用模型模拟获得了不同污泥浓度下的最优化参数,在四段式平板膜污泥浓缩中试运行中获得了较好的效果。     

工艺安全信息要素的探讨

工艺系统的危险性通常来自于所涉及的化学品和工艺过程（工艺技术和工艺设备）所带来的危害。工艺安全信息是开展工艺危害分析的依据,也是落实工艺安全管理系统其它要素的基础。近几年来,我国化工和石化行业发生多起重大工艺安全事故,这些重大工艺安全事故的发生是由多个工艺安全管理要素的缺失所造成的结果。此外,上艺安全信息没能得到有效掌控和合理应用,不能及时准确地为科学决策指导安全生产提供支持,也是导致这些事故发生的重要因素。     

喷雾塔中氨水吸收CO2的速率

为考察氨水细喷雾吸收CO2的能力,对喷雾塔中氨水细喷雾吸收CO2的反应过程进行了实验研究,测定了氨水吸收CO2的速率.实验结果表明,CO2的吸收速率随着氨水浓度、气体流量的升高而明显增大,随氨水流量升高也有所增加,CO2的吸收速率随CO2进口浓度的升高呈线性增加.当喷雾塔中温度低于40℃时,CO2的吸收速率随着塔内温度...     

Experimental study on agitated drying characteristics of sewage sludge under the effects of different additive agents

Drying experiments of dewatered sewage sludge（DSS） were conducted on a agitated paddle dryer, and the effects of additive agents, i.e., CaO, pulverized coal（PC）, heavy oil（HO）, and dried sludge（＂DS＂ through back mixing） on the agitated drying characteristics of DSS were investigated. The results indicated that CaO can significantly increase the drying rate of DSS.The drying rate at CaO/DSS（mass ratio） = 1/100 was 135% higher than that of CaO/DSS = 0.Pulverized coal has no obvious effect on drying rate, but the increase of PC/DSS can promote breaking up of sludge lump. Heavy oil was found to be slightly effective in improving the drying rate of DSS in the examined experimental range of HO/DSS = 0-1/20. It is also found that HO can reduce the torque of the dryer shaft, due to its lubrication effect. Back mixing of DS was found to be effective in alleviating the unfavorable effect of the lumpy phase by improving the mixing effect of the paddle dryer. There was a marked increase of drying rate with an increase of the DS/DSS in the experimental range of DS/DSS = 0-1/3.     

流域农村生活垃圾收运、处理模式探析研究——以巢湖流域为例

流域农村生活垃圾产量大,无害化处理水平低,已成为威胁流域水环境安全的重要因素.以巢湖流域为例,构建了农村生活垃圾收运、处理模式.从技术、经济、环境三方面分析,得出结论：农村“桶装车载直运模式”和“垃圾综合处理模式”可以充分利用现有垃圾处理设施,经村庄收集、乡镇转运,最终实现垃圾减量化、资源化、无害化.