Effects of preservation on wet weight,dry weight,nitrogen and carbon contents of Calanus helgolandicus (Crustacea: Copepoda)

The lengths, wet and dry weights, nitrogen and carbon contents of fresh, frozen and formaldehyde-fixed specimens of Calanus helgolandicus (Claus) were determined. Samples were collected during May 1980 in the Celtic Sea. Individual Copepodite Stages 3, 4, 5, and Adult Male and Female Stage 6 were measured and analysed, and 36 linear regression equations derived for these variables together with mean values, standard deviations and 95% confidence limits. The range of nitrogen values in the fresh material, expressed as a percentage of dry weight, ranged from 8.08%±0.80 (Copepodite Stage 3) to 10.89%±0.27 (adult female); carbon values changed from 41.6%±3.05 (mean ±95% confidence limits) for Copepodite Stage 3 to 50.97%±2.63 in Copepodite Stage 5. The adult females had a high nitrogen and relatively low carbon content, while the converse was true for Stage 5 copepodites. There was a loss of dry weight from the frozen samples (57%) and the fixed samples (38%) compared with the mean of the fresh dry weight of all stages. The material lost from the copepods was rich in nitrogen, thus, artificially high percentage carbon values were determined from the frozen and fixed samples (52.0 to 60.3% and 44.7 to 58.5%, respectively).     

A survey of drinking water supplies in the Province of Ontario for dioxins and furans

A survey of drinking water supplies in the Province of Ontario was initiated in 1983 to determine the extent of their contamination by polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). This drinking water survey arose from concerns regarding the discovery of PCDDs and PCDFs in sport fish from western Lake Ontario in the early 1980's.A total of 49 water supplies throughout all Regions of Ontario have been examined to date. Water supplies in the vicinity of chemical industries and pulp and paper mills were sampled more frequently; as many as 20 times. Detection limits were in the low parts per quadrillion (ppq) range for all tetra- to octachlorinated PCDDs and PCDFs.As of February 1989, 4, 347 results were received for 399 raw and treated water samples. Only 37 positive results were reported, constituting less than 1 percent of the total number of results. The O₈CDD congener accounted for 36 of the 37 positive results. The 2,3,7,8- TCDD isomer was not detected in any sample.     

A solvent-free method for spiking terrestrial algae (Desmococcus spp.) with pyrene for use in bioassays

Two methods for spiking terrestrial algae (Desmococcus spp., used as a foodstuff in bioassays with Collembola) with pyrene were tested; a "traditional" method that used a carrier solution of pyrene in acetone, and a solvent-free method developed using the principles of partition driven administration (PDA). The PDA method used a pre-spiked, highly-contaminated C18 disk as the source for pyrene, suspended and rotated in an aqueous algal suspension. The pyrene partitioned from the C18 disk into the aqueous phase, and a concentration of 18.4 +/- 0.7 microg pyrene g(-1)dwt. algae (mean +/- sd) was achieved after 18 h exposure by this method, with good reproducibility also observed for lower concentrations achieved over shorter exposure periods. The acetone-spiked algae lost much of its cell integrity and a significant amount of pigment, while cell integrity was maintained after 120 h spiking using the PDA method. Results from a short bioassay with Orchesella cincta (Collembola, Insecta) showed that animals fed acetone-spiked algae had slower growth rates and higher concentrations of pyrene metabolites than animals fed PDA-spiked algae. It is speculated that this was the result of the poor quality of the acetone-spiked food, and that the difference in food quality between treatments stimulated changes in body composition that may have affected the production of pyrene metabolites. The PDA spiking method is expected to be suitable for introducing a range of persistent organic pollutants into other types of sample matrix.     

Strength development of solidified/stabilized organic waste and optimum treatment design

Artificially contaminated (spiked) natural soils were solidified/stabilized using various combinations of commonly used additives, such as lime, cement, fly ash, activated carbon, and silica fume. The effectiveness of the solidification/stabilization (S/S) processes was evaluated based on experimental findings from compaction testing, unconfined compressive shear strength, and X-ray diffraction (XRD). Correlations of limited reliability between unconfined compressive strength and penetrometer and torvane measurements were derived. Results from XRD experiments indicated that certain organic contaminants (i.e., naphthalene and pyrene) might impact the S/S processes for a given combination of additives. The type and amount of organic contaminants also affected the pozzolanic reactions. Specifically, the absence or small peak intensity of pozzolanic product XRD patterns for a given combination of additives was a good indication that the type and the amount of organic contaminant present inhibited pozzolanic reactions. This phenomenon was tested and confirmed for actual field-contaminated samples.     

Analysis of colloid and tracer breakthrough curves

We consider the dispersion and elution of colloids and dissolved nonsorbing tracers within saturated heterogeneous porous media. Since flow path geometry in natural systems is often ill-characterized macroscopic (mean) flow rates and dispersion tensors are utilized in order to account for the sub-model scale microscopic fluctuations in media structure (and the consequent hydrodynamic profile). Even for tracer migration and dispersal this issue is far from settled.Here we consider how colloid and tracer migration phenomena can be treated consistently. Theoretical calculations for model flow geometries yield two quantitative predictions for the transport of free (not yet captured) colloids with reference to a non-sorbing dissolved tracer within the same medium: the average migration velocity of the free colloids is higher than that of the tracer; and that the ratio of the equivalent hydrodynamic dispersion rates of colloids and tracer is dependent only upon properties of the colloids and the porous medium, it is independent of pathlengths and fluid flux, once length scales are large enough.The first of these is well known, since even in simple flow paths free colloids must stay more centre stream. The second, if validated suggests how solute and colloid dispersion may be dealt with consistently in macroscopic migration models. This is crucial since dispersion is usually ill-characterized and unaddressed by the experimental literature. In this paper we present evidence based upon an existing Drigg field injection test for the validity of these predictions.We show that starting from experimental data the fitted dispersion rates of both colloids and non-sorbing tracers increase with the measured elution rates (obeying slightly different rules for tracers and colloids); and that the ratio of colloid and nonsorbing tracer elution rates, and the ratio of colloid and nonsorbing tracer dispersion rates may be dependent upon properties of the colloids and the medium (not the flow regime).It is important to realize that even for unretarded species, an earlier peak in the breakthrough curve does not necessarily correspond to a faster mean elution rate, or vice versa. But rather that a colloid may elute faster but disperse less than an equivalent tracer. Hence its peak may be retarded compared to that of the tracer, even assuming no retardation. Hence one must consider a combination of mean elution rate and mean dispersion rate, and not rely on “peak times” to corroborate chromatographic effects. The importance of this lies in the fact that these processes are not independent and yet upscale differently. Thus realistic estimates of effective colloid dispersion rates should be upscaled in a way consistent with that adopted for tracers within the same system.     

Mercury burdens in Chinese mitten crabs (Eriocheir sinensis) in three tributaries of southern San Francisco Bay, California, USA

Chinese mitten crabs (Eriocheir sinensis), endemic to Asia, were first reported in the San Francisco Bay in 1992. They are now established in nearly all San Francisco Bay tributaries. These crabs accumulate more metals, such as mercury, than crustaceans living in the water column. Because their predators include fish, birds, mammals and humans, their mercury burdens have an exceptional potential to impact the ecosystem and public health. We sought to elucidate the potential threat of mitten crab mercury burdens in three adjacent streams in southern San Francisco Bay, one of which is known to be contaminated with mercury. Mitten crabs had hepatopancreas concentrations of total mercury and methylmercury that did not differ among streams. The maximum burden we measured was below the action level of 1 ppm recommended by the USEPA. Hepatopancreas concentrations of methylmercury declined with increasing crab size, suggesting a mechanism for mercury excretion and that predators might reduce mercury exposure if they select larger crabs. Because mercury may be heterogeneously distributed among tissues, estimation of the impacts of crab mercury burdens on the environment requires more data on the feeding preferences of predators.     

Preparing to measure the effects of the NOx SIP call--methods for ambient air monitoring of NO,NO2, NOy,and individual NOz species

The capping of stationary source emissions of NOx in 22 states and the District of Columbia is federally mandated by the NOx SIP Call legislation with the intended purpose of reducing downwind O3 concentrations. Monitors for NO, NO2, and the reactive oxides of nitrogen into which these two compounds are converted will record data to evaluate air quality model (AQM) predictions. Guidelines for testing these models indicate the need for semicontinuous measurements as close to real time as possible but no less frequently than once per hour. The measurement uncertainty required for AQM testing must be less than +/-20% (+/-10% for NO2) at mixing ratios of 1 ppbv and higher for NO, individual NOz component compounds, and NOy. This article is a review and discussion of different monitoring methods, some currently used in research and others used for routine monitoring. The performance of these methods is compared with the monitoring guidelines. Recommendations for advancing speciated and total NOy monitoring technology and a listing of demonstrated monitoring approaches are also presented.     

Determination of mutagenic potential and organic contaminants of Great Lakes drinking water

Extracts of organic compounds were obtained, using XAD-2 macroreticular resin, from drinking water supplies in 12 Great Lakes municipalities. The extracts were tested for mutagenic potential using the Salmonella/mammalian-microsome assay and analysed for organochlorine pesticides, polyaromatic hydrocarbons, organophosphorous pesticides and trialkyl-arylphosphates. Grab samples of drinking water were also analysed for volatile organic compounds. Dose-related increases in mutagenicity were found in extracts from 11 of the drinking water supplies.     

Past, current and future fire frequency in the Canadian boreal forest: implications for sustainable forest management

Over the past decades, there has been an increasing interest in the development of forest management approaches that are based on an understanding of historical natural disturbance dynamics. The rationale for such an approach is that management to favor landscape compositions and stand structures similar to those of natural ecosystems should also maintain biological diversity and essential ecological functions. In fire-dominated landscapes, this approach is possible only if current and future fire frequencies are sufficiently low, comparing to pre-industrial fire frequency, that we can substitute fire by forest management. We address this question by comparing current and future fire frequency to historical reconstruction of fire frequency from studies realized in the Canadian boreal forest. Current and simulated future fire frequencies using 2 and 3 x CO2 scenarios are lower than the historical fire frequency for many sites, suggesting that forest management could potentially be used to recreate the forest age structure of fire-controlled pre-industrial landscapes. There are however, important limitations to the current even-age management.