Adaptive sampling and analysis programs for contaminated soils

Adaptive sampling and analysis programs (ASAPs) provide a cost-effective alternative to traditional sampling program designs. ASAPs are based on field analytical methods for rapid sample turnaround and field-based decision support for guiding the progress of the sampling program. One common objective of ASAPs is to delineate contamination present in soils, either to support feasibility studies or remedial action designs. An ASAP based on portable gas chromatograph/ mass spectrograph (GC/MS) technologies developed at Tufts University combined with decision support tools created at Argonne National Laboratory was used to delineate explosives contamination in soils at Joliet Army Ammunition Plant, Joliet, Illinois. Tufts' GC/MS technologies provided contaminant-specific identification and quantification with rapid sample turnaround and high sample throughput. Argonne's decision support tools estimated contamination extent, determined the uncertainty associated with those estimates, and indicated where sampling should continue to minimize uncertainty. In the case of Joliet, per sample analytical costs were reduced by 75 percent as compared to the cost of off-site laboratory analyses for explosives. The use of an ASAP resulted in a much more accurate identification and delineation of contaminated areas than a traditional sampling program would have with the same number of samples collected on a regular grid. While targeting explosives contamination in soils at Joliet, the ASAP technologies used in this demonstration have much broader application.     

Spatial and temporal trends in surface water and sediment contamination in the Laurentian Great Lakes

Data from recent sediment and surface water surveys have been collated and mapped to illustrate the spatial distribution of contaminants across the entire Great Lakes basin. Information from historical surveys, together with data from surface water monitoring programs in three major connecting channels, has also been collated in order to evaluate temporal trends. In general, Lakes Superior and Michigan exhibited the lowest levels of sediment contamination while Lake Ontario had the highest. Contaminants such as gamma-HCH (lindane) and dieldrin were ubiquitous in surface waters across the entire basin, which was indicative of atmospheric sources. The distribution of other compounds including hexachlorobenzene, octachlorostyrene and mirex indicated the presence of local sources within the watersheds of the connecting channels. Surficial sediment contamination was found to have decreased markedly since the late 1960s and 1970s. Similarly, surface water contamination decreased over the period 1986-1997 with concentrations of dieldrin, hexachlorobenzene, octachlorostyrene and mirex reduced by over 50%. However, the spatial distributions of both sediment and surface water contamination indicate that further effort is warranted in reducing local sources of contaminants, particularly in Lake Ontario.     

Polychlorinated dibenzodioxins and dibenzofurans in human adipose tissue samples from five Ontario municipalities

Human adipose tissue samples obtained during autopsies in 5 Canadian municipalities within the Great Lakes basin were analysed for polychlorinated dibenzodioxins and dibenzofurans using gas chromatography-high resolution-mass spectrometry. The mean congener values for male and female donors in each municipality are comparable with previously reported data. No significant differences in congener levels between male and female and between municipalities were detected. A positive correlation between congener level and age was observed for several congeners as well as for the total congener concentration expressed as its 2378-TCDD toxic equivalent.     

The 1999 Fresno particulate matter exposure studies: comparison of community, outdoor, and residential PM mass measurements

Two collaborative studies have been conducted by the U.S. Environmental Protection Agency (EPA) National Exposure Research Laboratory (NERL) and National Health and Environmental Effects Research Laboratory to determine personal exposures and physiological responses to particulate matter (PM) of elderly persons living in a retirement facility in Fresno, CA. Measurements of PM and other criteria air pollutants were made inside selected individual residences within the retirement facility and at a central outdoor site on the premises. In addition, personal PM exposure monitoring was conducted for a subset of the participants, and ambient PM monitoring data were available for comparison from the NERL PM research monitoring platform in central Fresno. Both a winter (February 1-28, 1999) and a spring (April 19-May 16, 1999) study were completed so that seasonal effects could be evaluated. During the spring study, a more robust personal exposure component was added, as well as a more detailed evaluation of physical factors, such as air-exchange rate, that are known to influence the penetration of particles into the indoor environment. In this paper, comparisons are made among measured personal PM exposures and PM mass concentrations measured at the NERL Fresno Platform site, outside on the premises of the retirement facility, and inside selected residential apartments at the facility during the two 28-day study periods. The arithmetic daily mean personal PM2.5 exposure during the winter study period was 13.3 micrograms/m3, compared with 9.7, 20.5, and 21.7 micrograms/m3 for daily mean overall apartment, outdoor, and ambient (i.e., platform) concentrations, respectively. The daily mean personal PM2.5 exposure during the spring study period was 11.1 micrograms/m3, compared with 8.0, 10.1, and 8.6 micrograms/m3 for the daily mean apartment, outdoor, and ambient concentrations, respectively.     

Development of emission factors for polycarbonate processing

Emission factors for selected volatile organic compounds (VOCs) and particulate emissions were developed while processing eight commercial grades of polycarbonate (PC) and one grade of a PC/acrylonitrile-butadiene-styrene (ABS) blend. A small commercial-type extruder was used, and the extrusion temperature was held constant at 304 degrees C. An emission factor was calculated for each substance measured and is reported as pounds released to the atmosphere/million pounds of polymer resin processed [ppm (wt/wt)]. Scaled to production volumes, these emission factors can be used by processors to estimate emission quantities from similar PC processing operations.     

The effects of cadmium and zinc interactions on the accumulation and tissue distribution of zinc and cadmium in lettuce and spinach

The interactions between Zn and Cd on the concentration and tissue distribution of these metals in lettuce and spinach were studied at levels corresponding to background and Zn-Cd contaminated sites. Plants were grown in nutrient solutions containing 0.398-8.91 microM Zn and 0.010-0.316 microM Cd. Cadmium accumulated more in old than in young leaves of both crops at any solution Cd level, whereas Zn followed that pattern only at Zn levels > or = 3.16 microM. Increasing solution Cd increased Zn concentrations in young leaves of lettuce but not of spinach, regardless of Zn levels. Cadmium concentrations in young leaves of both crops decreased exponentially with increasing solution Zn at low (0.0316 microM) but not at high (0.316 microM) solution Cd. The Zn: Cd concentration ratios in young leaves of lettuce and spinach grown at 0.316 microM Cd became greater as the solution Zn increased. Cadmium and Zn concentrations in young leaves were related more closely to the relative concentrations of Zn and Cd in solution than were the concentrations in old leaves, especially in lettuce. Studies of Zn-Cd interactions and Cd bioavailability should differentiate between basal and upper leaves of lettuce and spinach. Compared to Cd-only pollution, Zn-Cd combined pollution may not decrease Cd concentrations in lettuce and spinach edible tissues, but because it increases their Zn concentrations it lowers plant Cd bioavailability.     

Introduction to the Special Issue

Introduction

Introduction to the Special Issue     

The use of phytotoxicity tests (common duckweed,cabbage, and millet) for determining effluent toxicity

The objective of this study was to use higher plants for detecting effluent toxicity. Eight effluent samples were obtained from three industrial sources prior to their entry into a sewer system. The tests were the duckweed reproduction test, and root growth tests using cabbage and millet. The results of repeated phytotoxicity tests were reproducible. Of the three industrial sources, the effluent samples from a specialty chemical industry were the most toxic. For two samples from this source, the IC50 values (the concentrations which caused 50% inhibitory effect) for duckweed were less than 1.6% effluent concentration. The samples from an agricultural product utilization plant were the least toxic. For these samples, root growth tests failed to obtain IC50 values while the duckweed tests showed IC50 values of 91 and 43% effluent concentration. Among the three types of tests conducted, the duckweed reproduction test showed the greatest sensitivity to effluent toxicity, while root growth tests using cabbage and millet had mixed results. Duckweed is recommended as a part of a battery of tests for effluent toxicity.     

Optimization of sampling for the determination of mean radium-226 concentration in surface soil

There are thousands of properties in the United States on which the soil has been contaminated to some degree with uranium mill tailings. An effort is now underway by the United States Department of Energy to identify sites contaminated with tailings and to perform remedial action when ²²⁶Ra levels exceed current guidelines. Because of the large number of sites involved, it is imperative that sample collection be performed in a cost-effective manner. In this paper we describe the results of a study in which we compared the efficiencies of different methods of sample collection in order to determine an optimal method for estimating the mean ²²⁶Ra concentration in soil. The study involved a field experiment in which extensive sampling was performed on sites known to be contaminated with uranium tailings. The experiment was designed to identify the advantages and limitations of composite sampling, the relative merits of random and uniformly spaced sample collection, the use of field gamma measurements for supplementing and reducing soil sample collection, and practical levels of accuracy and precision that can be obtained. Conclusions regarding gamma measurements are unique to ²²⁶Ra contamination. On the other hand, conclusions concerning composite sampling and random versus uniformly spaced sampling may depend primarily on the way the contamination was spread by man and hence may not be unique to ²²⁶Ra.Research sponsored by the Department of Remedial Action Projects, Office of Terminal Waste Disposal, U. S. Department of Energy under contract DE-AC05-84OR21400 with the Martin Marietta Energy Systems, Inc.ORNL—Grand Junction Office, Grand Junction, Colorado.