UDS-test with freon 11 (R-11)

Trichlorofluoromethane, in concentrations of 80, 400, 2 000, 10 000 and 50 000 ppm, was administered to rats of both sexes (Sprague Dawley) by inhalation exposure. 2 000 ppm in air (= 11 200 mg/m³) amount to twice the MAK value of 1 000 ppm. At exposure times of 4 hours this corresponds to the MAK value defined for an 8 hour workday. Unscheduled DNA synthesis (UDS) was measured in single-cell suspensions of hepatocytes, pulmonary epithelial cells and lymphocytes of the spleen, respectively. In the pulmonary cells concentrations of 2 000, 10 000 and 50 000 ppm of freon 11 lead to a significantly increased mean silver grain count compared to a negative control group. In spleen and liver cells increasing concentrations of R 11 tend to increase the incorporation of thymidine into the DNA of the cells. These changes of the extent of unscheduled DNA synthesis can, however, not be statistically verified.     

The SeKT joint research project: definition of reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests

- In current biotest approaches, intact organisms or in vitro systems are exposed to sediments using different exposure scenarios. The most important issue in sediment toxicity testing protocols is the question which test phase (solid or liquid) should be used. Whole-sediment exposure protocols represent the most realistic scenario to simulate in situ exposure conditions in the laboratory. However, until now there is no agreement in how to acquire and to evaluate the data of the various available sediment contact assays. The SeKT joint research project was initiated with the aim to compare recently developed sediment contact assays by addressing reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests.     

Tradescantia micronucleus test indicates genotoxic potential of traffic emissions in European cities

Urban atmospheres contain complex mixtures of air pollutants including mutagenic and carcinogenic substances such as benzene, diesel soot, heavy metals and polycyclic aromatic hydrocarbons. In the frame of a European network for the assessment of air quality by the use of bioindicator plants, the Tradescantia micronucleus (Trad-MCN) test was applied to examine the genotoxicity of urban air pollution. Cuttings of Tradescantia clone #4430 were exposed to ambient air at 65 monitoring sites in 10 conurbations employing a standardised methodology. The tests revealed an elevated genotoxic potential mainly at those urban sites which were exposed to severe car traffic emissions. This bioassay proved to be a suitable tool to detect local 'hot spots' of mutagenic air pollution in urban areas. For its use in routine monitoring programmes, however, further standardisation of cultivation and exposure techniques is recommended in order to reduce the variability of results due to varying environmental conditions.     

Determination of 10 particle-associated multiclass polar and semi-polar pesticides from small streams using accelerated solvent extraction

A new analytical method using accelerated solvent extraction was developed for the determination of 10 particle-associated polar and semipolar pesticides. In addition, six deuterated analogues of the target compounds were evaluated as internal standards. The method yielded acceptable accuracy (73–103% recovery) and precision (<25% relative standard deviation) for eight compounds. Using size exclusion chromatography (SEC) as cleanup step resulted in higher recoveries compared to solid phase extraction (SPE) cleanup.

Deuterated standards with 10 or more deuterium atoms performed well as internal standards concerning similar recovery and correlation with the target analytes.

The method was employed to extract particle-associated pesticides from 16 streams located in an area with intense agriculture in France. Acetochlor, pirimicarb, tebuconazole, fenpropidin, -endosulfan and chlorfenvinphos were detected at concentrations up to 1 mg kg⁻¹ dry weight. A comparison with aquatic toxicity data indicated potential risk to the benthic fauna exposed to these concentrations of pirimicarb, -endosulfan and chlorfenvinphos.

We suggest that the method presented here be used for the extraction and quantitation of particle-associated polar pesticides.     

Inside-sediment partitioning of PAH, PCB and organochlorine compounds and inferences on sampling and normalization methods

Comparability of sediment analyses for semivolatile organic substances is still low. Neither screening of the sediments nor organic-carbon based normalization is sufficient to obtain comparable results. We are showing the interdependency of grain-size effects with inside-sediment organic-matter distribution for PAH, PCB and organochlorine compounds. Surface sediment samples collected by Van-Veen grab were sieved and analyzed for 16 PAH, 6 PCB and 18 organochlorine pesticides (OCP) as well as organic-matter content. Since bulk concentrations are influenced by grain-size effects themselves, we used a novel normalization method based on the sum of concentrations in the separate grain-size fractions of the sediments. By calculating relative normalized concentrations, it was possible to clearly show underlying mechanisms throughout a heterogeneous set of samples. Furthermore, we were able to show that, for comparability, screening at <125 μm is best suited and can be further improved by additional organic-carbon normalization.     

(M)VOC and composting facilities. Part 2: (M)VOC dispersal in the environment

BACKGROUND, AIMS AND SCOPE: Composting facilities are known to release odorous volatiles due to biodegradation of municipal waste and plant residues. Although odour perception and its grading is influenced by experience, attitude and adaptation, these emissions have created a lack of acceptance for residents in the vicinity of composting facilities. Enclosure of compost pile halls, ventilation systems and biofilters are often insufficient to minimise the burden of compost-derived compounds in the air. Moreover, economic considerations forced smaller communities to establish less sophisticated facilities with open storage areas and other relevant sources for wind-borne dispersal of bioaerosols. Aim of the present study was to characterise the immission and dispersal of microbial volatiles (MVOC) and, besides, to find coincidences between MVOC and compost odour. METHODS: In the course of this study, the surroundings of two composting facilities, differing in their type of process engineering, were investigated for emission of volatiles in the environment. Both microbially and plant-derived substances were assessed, several of which have low odour thresholds. Air samples were taken in distances ranging from 50 to 800 m in a downwind direction from each facility. RESULTS AND DISCUSSION: Compost-derived and microbial volatile organic compounds (MVOC) were found at distances of up to 800 m from the composting facilities. Terpenes like alpha-pinene, camphene and camphor were the dominant compounds and coincided with typical compost odour, whereas several typical MVOC were not found at greater distances. The terpenes in combination with certain MVOC may play an important role in the perception of compost odour. Exposure concentrations were not of toxicological relevance, but sensory irritation and psychohygienic effects due to an annoyance potential of such compounds should not be dismissed. RECOMMENDATIONS AND OUTLOOK: Although terpenes are generally associated with pleasant odour characteristics, they seemed to contribute to malodours in a mixture with other VOC, in this context of volatile waste from compost facilities. Malodorous emissions from biowaste have to be considered as sources of health complaints and the investigation of mixtures of compost-derived volatiles is still inevitable. Exposure levels have to be discussed taking VOC mixtures into account. Within composting facilities, technical devices have to be improved to minimise dispersal of volatiles to prevent residents from immissions eventually causing health complaints.     

Farm, land, and soil nitrogen budgets for agriculture in Europe calculated with CAPRI

We calculated farm, land, and soil N-budgets for countries in Europe and the EU27 as a whole using the agro-economic model CAPRI. For EU27, N-surplus is 55 kg N ha⁻¹ yr⁻¹ in a soil budget and 65 kg N₂O–N ha⁻¹ yr⁻¹ and 67 kg N ha⁻¹ yr⁻¹ in land and farm budgets, respectively. NUE is 31% for the farm budget, 60% for the land budget and 63% for the soil budget. NS values are mainly related to the excretion (farm budget) and application (soil and land budget) of manure per hectare of total agricultural land. On the other hand, NUE is best explained by the specialization of the agricultural system toward animal production (farm NUE) or the share of imported feedstuff (soil NUE). Total N input, intensive farming, and the specialization to animal production are found to be the main drivers for a high NS and low NUE.     

Leaching Induced Changes in Substrate and Solution Chemistry of Mine Soil Microcosms

Leaching of soluble salts formed as the result of pyrite oxidation and primary mineral weathering is a major process in mine soil development. A microcosm experiment was designed to study leaching rates from mine soil columns under controlled laboratory conditions. Objectives of this experiment were to investigate the effect of leaching and the effect of fly ash amelioration on mid- to long-term chemical soil properties, and to test whether the results are qualitatively comparable to long-term field studies along a site chronosequence. The leaching experiment was conducted over a period of 850 days representing a kind of time-lapse picture due to high water fluxes. Leaching resulted in more favourable mid- to long-term properties of mine site topsoils, especially a reduced risk for acidity and salt stress. Ash amelioration decreases leaching rates by increasing pH and Al and Fe precipitation. It could be shown that the results of the column leaching studies are qualitatively in good agreement with field observations at least for long-term considerations. By enhancing the leaching process mid- to long-term chemical soil properties can be estimated.     

A comparison of emission calculations using different modeled indicators with 1-year online measurements

The overall measurement of farm level greenhouse gas (GHG) emissions in dairy production is not feasible, from either an engineering or administrative point of view. Instead, computational model systems are used to generate emission inventories, demanding a validation by measurement data. This paper tests the GHG calculation of the dairy farm-level optimization model DAIRYDYN, including methane (CH₄) from enteric fermentation and managed manure. The model involves four emission calculation procedures (indicators), differing in the aggregation level of relevant input variables. The corresponding emission factors used by the indicators range from default per cow (activity level) emissions up to emission factors based on feed intake, manure amount, and milk production intensity. For validation of the CH₄ accounting of the model, 1-year CH₄ measurements of an experimental free-stall dairy farm in Germany are compared to model simulation results. An advantage of this interdisciplinary study is given by the correspondence of the model parameterization and simulation horizon with the experimental farm’s characteristics and measurement period. The results clarify that modeled emission inventories (2,898, 4,637, 4,247, and 3,600 kg CO₂-eq. cow^?1 year^?1) lead to more or less good approximations of online measurements (average 3,845 kg CO₂-eq. cow^?1 year^?1 (±275 owing to manure management)) depending on the indicator utilized. The more farm-specific characteristics are used by the GHG indicator; the lower is the bias of the modeled emissions. Results underline that an accurate emission calculation procedure should capture differences in energy intake, owing to milk production intensity as well as manure storage time. Despite the differences between indicator estimates, the deviation of modeled GHGs using detailed indicators in DAIRYDYN from on-farm measurements is relatively low (between ?6.4 % and 10.5 %), compared with findings from the literature.