昆明市医疗废物的焚烧处理

医疗废物含有大量传染性物质,导致污染的可能是各种病菌和寄生虫卵等,是高度危险废物,必须进行无害化处置.针对昆明市医疗废物的现状,根据国内外先进的管理和处理模式,结合昆明市实际情况,采用焚烧实验炉焚烧昆明市医疗废物,医疗废物无须进行预处理,能直接进行焚烧.实验证明,高温焚烧可彻底清除医疗废物中的病菌及恶臭气体,保证医疗废物的无害化处理.     

经济欠发达山区矿泉水资源的开发利用--以梅州市为例

基于矿泉水与人体健康的关系、在社会经济发展中的作用,以及对梅州市矿泉水资源条件及其开发利用现状的调研,探讨了经济欠发达山区矿泉水资源的开发利用对策和前景.认为应统一资源管理,加强质量监督力度,打造优质品牌,提高市场竞争能力,争取与食品、旅游等部门联营,使矿泉水产品多样化、系列化;结合地方工业建设和梅州旅游市场需求,培育矿泉水消费市场.     

论高职高专英语教学改革——我院英语分级教学探索

根据目前我院英语教学状况,英语公共课有必要改革"单一目标"的教学模式,采用多目标个性化分层教学模式,提高学生英语素质.文中具体探讨了多目标个性化分级教学模式的内涵、实施的前提条件、依据及策略.     

超高强度钻杆低温断裂性能及裂纹扩展特征研究

超高强度钻杆在冬季低温环境下容易发生脆性断裂事故,为了从断裂力学角度揭示其冷脆现象的本质,采用ZBC2302-D型示波冲击试验机,获得了不同温度下超高强度钢在冲击断裂过程中的力-位移曲线,并对比分析了冲击功、起裂功和裂纹扩展功之间的变化关系。采用国家标准GB 4161—2007中的计算公式,计算了冲击试样的裂纹扩展量Δa和阻抗应力强度因子K_R;同时,引入K_R阻力曲线,得到超高强度钻杆在不同温度下的剩余强度图。结果表明,当冲击试样开始出现裂纹时,随温度降低,钻杆的初始起裂应力有所增加,出现硬化现象。当钻杆出现一定长度的裂纹时,随温度降低,阻抗应力强度因子越来越小,而且降低速度越来越快,剩余强度也表现出相同的变化趋势。随温度降低,材料抵抗裂纹扩展的能力逐渐下降,表明钻杆在低温下更容易断裂。     

Optimal Policy Mechanism Design for Cross-Sector and Multi-Stage Pollution Control with a Bilevel Model: Application to SO<Subscript>2</Subscript> Emission in China

In this paper, we construct a multi-stage coordinated programming model under tax system to control SO₂ emission. The model is based on an explicitly formulated SO₂ abatement cost function created under Chinese condition. Analysis of the effectiveness and impact on the economy of the model is carried out with consideration of game theory. By solving the model, theoretical results show that the volume-based multi-stage SO₂ tax system has two properties: effectiveness and equal-rate. Based on these theoretical results, empirical study is also performed using Chinese historical data. Compared with yearly single-stage programming model, the tax rate generated by the coordinated multi-stage programming model is time-invariant and rather moderate in scale. The total abatement cost among planning years in our model is 21.03 % less than the actual number and 6.68 % less than that in the single-stage situation. The tax payment suggested by our model is 10.62 % less than by the single-stage model. In general, a coordinated multi-stage programming model helps reduce the overall costs of environmental protection while achieving the same emission control target with less burden added to the economy.     

Precursors and potential sources of ground-level ozone in suburban Shanghai

• Air masses from Zhejiang Province is the major source of O₃ in suburban Shanghai. • O₃ formation was in VOC-sensitive regime in rural Shanghai. • O₃ formation was most sensitive to propylene in rural Shanghai. A high level of ozone (O₃) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O₃ during summer in Shanghai, O₃ and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration weighted trajectories (CWT), we found that Zhejiang province was the main potential source of O₃ in suburban Shanghai. When the sampling site was controlled by south-western winds exceeding 2 m/s, the O₃-rich air masses from upwind regions (such as Zhejiang province) could be transported to the suburban Shanghai. The propylene-equivalent concentration (PEC) and ozone formation potential (OFP) were further calculated for each VOC species, and the results suggested that propylene, (m+p)-xylene, and toluene played dominant roles in O₃ formation. The Ozone Isopleth Plotting Research (OZIPR) model was used to reveal the impact of O₃ precursors on O₃ formation, and 4 base-cases were selected to adjust the model simulation. An average disparity of 18.20% was achieved between the simulated and observed O₃ concentrations. The O₃ isopleth diagram illustrated that O₃ formation in July 2016 was in VOC-sensitive regime, although the VOC/NO_x ratio was greater than 20. By introducing sensitivity (S), a sensitivity analysis was performed for O₃ formation. We found that O₃ formation was sensitive to propylene, (m+p)-xylene, o-xylene and toluene. The results provide theoretical support for O₃ pollution treatment in Shanghai.     

Structural regulation of electroplating sludge by a metal–organic framework synthesis method for an enhanced denitrification activity

Journal of Material Cycles and Waste Management - Electroplating sludge contained multi-metals and organics. In previous reports, electroplating sludges were usually recycled by direct calcination...     

308 nm光作用下α-Fe2O3表面HNO3的光解

采用紫外可见光谱(UV-Vis)、傅立叶变换红外光谱(FTIR)及离子色谱(IC)技术对HNO3在α-Fe2O3表面暗反应和308nm下光解反应进行了研究.考察了时间、HNO3浓度、相对湿度(RH)等条件对反应的影响.结果表明,随着HNO3浓度、光照时间的增加,HNO3在气相与α-Fe2O3表面光解产物浓度均呈指数增加;HNO3在α-Fe2O3表面光解产生的NO2、NO分别为气相产生的3.27及3.87倍,而无论气相还是表面光解的NO2浓度均约为NO的2倍.随着RH的增加,HNO3光解产生的HONO的浓度随之呈指数增大,其产率从RH 20%时的0.023增加到90%时的0.087.α-Fe2O3的表面效应在HNO3的表面光解反应中起主导作用.     

南京北郊春季气溶胶吸湿性分析

大气气溶胶的吸湿性对气溶胶粒子的谱分布、云凝结核形成、气候强迫、人体健康等均有重要的影响.利用吸湿性串联差分迁移率分析仪(HTDMA)在2014年4月16日~5月21日对南京北郊的大气气溶胶吸湿特性进行观测.30~230 nm气溶胶粒子在90%相对湿度下的吸湿增长观测结果表明,气溶胶粒子的吸湿增长因子平均概率分布函数(GF-PDF)呈现明显的双峰分布,即一个占主导地位的强吸湿模态,和一个相对较小但仍很明显的弱吸湿模态.对吸湿性的日夜对比分析发现,整体上白天的气溶胶粒子吸湿性大于夜间气溶胶粒子,白天强吸湿模态的粒子数目比例高于夜间,夜间气溶胶粒子的外混合程度更高.利用HYSPLIT模式对气溶胶来源分析结果表明,观测期间南京北郊主要受到3类气团的影响.其中西北大陆气团背景下爱根核模态粒子在经过大陆的长距离输送过程后,老化程度较高,吸湿性也更强.而对于积聚模态粒子,则为来自东方气团的粒子吸湿性更强,强吸湿模态粒子数目比例也较高.局地气团背景下气溶胶粒子在各粒径段都具有较高的强吸湿比例.     

天津冬季一次重污染过程颗粒物中水溶性离子粒径分布特征

为研究天津冬季重污染天气过程中颗粒物水溶性离子的粒径谱分布及二次离子生成机制,于2014年1月利用Anderson撞击式分级采样器在中国气象局天津大气边界层观测站内采集颗粒物样品,并使用离子色谱仪分析Na~+、NH_4~+、K~+、Mg~(2+)、Ca~(2+)、Cl~-、NO_3~-、SO_4~(2-)等8种水溶性无机离子(TWSII).结果表明,采样期间PM_(2.5)和PM_(10)质量浓度均值分别为(138±100)μg·m~(-3)和(227±142)μg·m~(-3),粗、细粒子中TWSII的平均浓度分别为(34.07±6.16)μg·m~(-3)和(104.16±51.76)μg·m~(-3).细粒子中SO_4~(2-)、NO_3~-和NH_4~+这3种离子的浓度远高于其他离子,且相关性较好,粗粒子中NO_3~-、SO_4~(2-)、Cl~-浓度较高.随着污染程度加剧,细粒子中TWSII浓度增加明显,粗粒子中则变化不大.水溶性离子的粒径谱分布显示,SO_4~(2-)以单模态分布,优良天峰值出现在0.43~0.65μm,NO_3~-在优良日呈现三模态分布,峰值分别出现在0.43~0.65、2.1~3.3和5.8~9.0μm,NH_4~+呈双模态分布,优良日峰值出现在0.43~0.65μm和4.7~5.8μm,污染日3种二次离子峰值均以0.65~1.1μm的单模态分布为主,与三者之间的热动力平衡过程有关.细粒子中NH_4~+除与SO_4~(2-)和NO_3~-结合外,还与部分Cl~-结合,粗粒子中NH_4~+全部与NO_3~-和SO_4~(2-)结合后,剩余的NO_3~-和SO_4~(2-)与其他阳离子结合.