不同年龄夜鹭卵中有机氯农药污染的生物指示

通过对太湖鼋头渚 2 0 0 0年采集的二龄、三龄和四龄夜鹭卵以及相应年龄组夜鹭的捕食物中有机氯残留的检测 ,发现捕食物中HCH和DDT的平均残留量随年龄增加而增加 .除γ HCH外 ,其它 15种有机氯农药在卵样中均有检出 ,残留水平最高的为p ,p′ DDE ,占有机氯农药残留总量的 85 %以上 .β HCH是六六六类中持留性最强的组分 ,其残留量仅次于p ,p′ DDE .研究发现 ,p ,p DDT和 β HCH检出率为 10 0 % ,而其它类型农药只有很低的检出率 ,这与我国有机氯农药使用的历史情况相吻合 .随着亲鸟年龄增加 ,卵中 β HCH残留量有所提高 ,p ,p′ DDE残留量似有先升后稍降的趋势 .统计结果表明 :各年龄组有机氯残留量差异不明显 ,因此在用夜鹭卵作有机氯污染的生物指示时可以不考虑年龄差异所带来的影响 .     

鼋头渚不同年龄夜鹭卵中多氯联苯污染状况及分布特征

通过对太湖鼋头渚2000年采集的2龄、3龄和4龄夜鹭所产卵中15种多氯联苯同系物残留状况的研究,发现所有样品中均检出多氯联苯,残留量最高的为PCB₁₁₈,PCB₈₇,PCB₁₀₁和PCB₁₅₃,占PCBs残留量的75%～85%.含5～6个氯原子的同系物在夜鹭卵中的PCBs残留量明显高于其它类型的同系物.同时,多氯联苯残留量随亲鸟年龄增加而明显增加.4龄卵样分别比3龄、2龄卵样中PCBs残留量高出47.5%和60.9%.统计处理结果表明:多氯联苯残留总量与亲鸟年龄呈正相关(p=0.05).PCBs总量与亲鸟年龄呈正相关(p=0.05).与欧美日等国家同类研究结果中PCB₁₅₃残留量最高的情况略有不同,本研究在夜鹭卵中发现残留量最高的是PCB₁₁₈,占PCBs残留总量的30%左右,PCB₁₅₃含量仅为PCBs残留总量的17%左右.     

Mitigating construction safety risks using prevention through design

Introduction

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD).

Method

This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs.

Results

Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction.

Impact on industry

The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance.     

Monitoring of sources and atmospheric processes controlling air quality in an urban Mediterranean environment

Different monitoring parameters (PM mass concentrations, number–size distribution, black carbon, gaseous pollutants, and chemical composition, among others) are currently used in air quality studies. Urban aerosols are the result of several sources and atmospheric processes, which suggests that a single monitoring technique is insufficient to quantitatively evaluate all of them.This study assesses the suitability of a number of monitoring techniques (PM mass concentrations, number and size distribution of ultra-fine particles, levels of gaseous pollutants, and a complete chemical characterization of PM₁₀ and PM_2.5) by examining the response of those techniques to the different emission sources and/or atmospheric processes affecting an urban Mediterranean area (Barcelona, NE Spain).The results of this work reveal that the PM mass, the number concentration and the chemical composition give different, but complementary, information. Whereas the mineral matter, a key atmospheric aerosol component across the Mediterranean, is not properly quantitatively assessed by measuring sub-micrometric particles, the monitoring of the number concentration is indispensable to interpret the origin of specific aerosol episodes. Furthermore, the chemical composition yields very relevant information to deduce the causes of specific pollution episodes.The number concentration of ultra-fine particles in urban areas is strongly dependent upon vehicle exhaust emissions, which may cause adverse health impacts. Moreover, urban Mediterranean environments are favourable to produce nucleation-mode particles (<20 nm) with photochemical origin. In those cases, these particles are expected to be of high solubility and consequently their toxicity may differ from that of traffic-generated ultra-fine particles. Thus, the use of a single monitoring parameter to evaluate the health effects seems to be not enough.     

Monitoring of firefighters exposure to smoke during fire experiments in Portugal

Forest fires represent a serious threat to public security in Europe due to the large burned area. Moreover, smoke pollution due to forest fire events is an important public health issue for the communities directly affected, and particularly for the personnel involved in firefighting operations. Aiming to contribute to the scientific knowledge concerning firefighters exposure to forest fires smoke, data of individual exposure to carbon monoxide, nitrogen dioxide, volatile organic compounds, and particulate matter were obtained during experimental field fires for a group of 10 firefighters equipped with portable “in continuum” measuring devices. Measured values are very high exceeding the Occupational Exposure Standard limits, in particular for peak limit thresholds. These are the first measurements and analysis of firefighter's individual exposure to toxic gases and particles in fire smoke experiments in Europe. However, they already indicate that urgent measures to avoid these levels of exposure are needed.     

Interactive effects of metal contamination and pathogenic organisms on the introduced marine bivalve Ruditapes philippinarum in European populations

In natural environment, marine organisms are concomitantly exposed to pollutants and multiple disease agents resulting in detrimental interactions. The present study evaluated interactive effects of metal contamination (cadmium) and pathogenic organisms (trematode parasites Himasthla elongata and pathogenic bacteria Vibrio tapetis) singularly and in combination on the bivalve Ruditapes philippinarum, an introduced species to Europe, under laboratory controlled conditions. After 7 days, metal bioaccumulation and pathogen load were analyzed as well as metallothionein (MT) response and hemocyte concentrations and activities. Results showed that infection by opportunistic pathogens affects metal accumulation, leading to maximal Cd accumulation in co-infected clams. Among stressors only V. tapetis induced significant effects on immune parameters whereas a particular interaction “trematode-bacteria” was shown on MT responses. Despite low trematode infection in agreement with the resistant status of R. philippinarum to these macroparasites, significant interaction with bacteria and metal occurred. Such results highlight the necessity of taking pathogens into account in ecotoxicological studies.     

Congener profile, occurrence and estimated dietary intake of dioxins and dioxin-like PCBs in foods marketed in the Region of Valencia (Spain)

During 2006-2008, a monitoring program was conducted on 29 target compounds, including PCDD/Fs and dl-PCBs, comprising 150 randomly collected individual food samples marketed in the Region of Valencia, Spain, grouped into 8 categories (vegetables, cereals, fats and oils, eggs, milk and dairy products, fish products, meat and meat products and fish oil). For PCDD/Fs, the highest frequency of detection corresponds to 1,2,3,4,6,7,8-HpCDD, OCDD, 2,3,4,7,8-PeCDF; and PCBs 118, 105 and 156 were the more frequent dl-PCBs. The food groups presenting higher contamination, expressed as toxic equivalents (WHO-TEQs), were fish oil (6.38 pg WHO-TEQ g⁻¹ fat), fish (1.21 pg WHO-TEQ g⁻¹ w.w.) and milk and dairy products (0.90 pg WHO-TEQ g⁻¹ fat). Of all analysed samples, only two fish oils presented levels higher than the EU limits for total WHO-TEQ. The average PCDD/Fs and dl-PCBs intakes were estimated as 2.86 pg WHO-TEQ kg⁻¹ b.w. d⁻¹ and 4.58 pg WHO-TEQ kg⁻¹ b.w. d⁻¹, for adults and children, respectively, using the deterministic method for chronic exposure. The main contributors to total intake for adults were fish (59%), milk and dairy products (19%), and fat and oils (9%). The average daily intake for adults (2.86 pg WHO-TEQ kg⁻¹ b.w. d⁻¹) is within range of TDI recommended by the WHO (1-4 pg WHO-TEQ kg⁻¹ b.w. d⁻¹), and slightly above the TWI and PTMI adopted by SCF and JECFA respectively.     

Diastereoisomer- and enantiomer-specific determination of hexabromocyclododecane in fish oil for food and feed

Fish oils are one of the main sources of ω-3 fatty acids. However, they can present elevated levels of some lipophilic pollutants, such as hexabromocyclododecanes (HBCDs). Since data about HBCDs in fish oil samples are very limited, in this study, 25 samples of fish oil for feed and food have been analyzed. Total HBCDs, as well as, α-, β- and γ-diastereoisomers have been determined. Total HBCDs ranged from 0.09 to 26.8 ng g⁻¹, with higher concentrations in fish oil for feed (average value of 9.69 ng g⁻¹) than those for food (1.14 ng g⁻¹). Concentrations of α-HBCD (average value of 4.12 ng g⁻¹ in feed samples and 0.48 ng g⁻¹ in food samples) and γ-HBCD (5.05 and 0.43 ng g⁻¹ respectively) were higher than that of β-HBCD (0.52 and 0.19 ng g⁻¹ respectively) in most of the samples. However, none of them was predominant in the samples. Concentrations of HBCDs were compared to concentrations of other pollutants and correlation between dioxin and dioxin-like PCBs levels and HBCDs levels were observed. Intake of HBCDs was calculated for fish oil with human consumption purposes and it ranged from 0.08 to 5.38 ng HBCDs d⁻¹, which could contribute significantly to HBCDs total intake. Enantiomeric fractions were also determined. No clear enrichment was observed for γ-HBCD, while (−)-α-HBCD enrichment was detected in some samples.     

Thermogravimetric kinetic analysis and pollutant evolution during the pyrolysis and combustion of mobile phone case

The increase in electronic waste, including cellular telephones, worldwide is a worrying reality. For this reason, urgent action on the management of these wastes is necessary within a framework that respects the environment and human health. Mobile phone components can be physically segregated through grinding at the dismantling sites, in order to reuse or reprocess (via chemical or physical recycling) the recovered plastics and valuable metals. A kinetic study of the thermal decomposition of a mobile phone case has been carried out under different conditions by thermogravimetry. Several experiments were performed in a nitrogen atmosphere (pyrolysis runs) and also in an oxidative atmosphere with two different oxygen concentrations (10% and 20% oxygen in nitrogen). Dynamic runs and dynamic+isothermal runs have been carried out to obtain much decomposition data under different operating conditions. Moreover some TG-MS runs were performed in order to better understand the thermal decomposition of a mobile phone case and identify some compounds emitted during the controlled heating of this material. A scheme of two independent reactions for pseudocomponents has been proposed for the pyrolysis process. For the combustion runs, the scheme proposed includes two pyrolytic reactions competing with other two reactions with formation of an intermediate residue, and finally the reaction of oxidation/burning of the intermediate residue. Furthermore, pyrolysis and combustion runs at 500 °C in a horizontal laboratory furnace were carried out. More than 50 compounds, including carbon oxides, light hydrocarbons, and polycyclic aromatic hydrocarbons (PAHs) have been identified and quantified. The main semivolatile compounds detected were phenol and styrene. Furthermore, polychlorodibenzo-p-dioxin and polychlorodibenzofurans (PCDD/Fs) and dioxin-like PCBs produced were analyzed. In the combustion run, PCDDs were obtained in higher amounts than PCDFs and HxCDD was the most emitted homologue.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.