Decision-making in controlling development of driving/piloting situations

This paper introduces the presentation of several works carried out, in France, in the field of transport ergonomics and psychology. It aims at pointing out the original features of the French ergonomics approach of dynamic situations; these features are related to the method used (the analysis of an activity in actual working conditions is emphasized) and the specific definitions of several concepts such as the concepts of ‘work activity’, ‘task’ and ‘situation’. This introductory paper proposes to define these notions and to show their relevance to an analysis of driving activities.     

A methodology to determine gaseous emissions in a composting plant

Environmental impacts associated to different waste treatments are of interest in the decision-making process at local, regional and international level. However, all the environmental burdens of an organic waste biological treatment are not always considered. Real data on gaseous emissions released from full-scale composting plants are difficult to obtain. These emissions are related to the composting technology and waste characteristics and therefore, an exhaustive sampling campaign is necessary to obtain representative and reliable data of a single plant. This work proposes a methodology to systematically determine gaseous emissions of a composting plant and presents the results obtained in the application of this methodology to a plant treating source-separated organic fraction of municipal solid waste (OFMSW) for the determination of ammonia and total volatile organic compounds (VOC). Emission factors from the biological treatment process obtained for ammonia and VOC were 3.9 kg Mg OFMSW⁻¹ and 0.206 kg Mg OFMSW⁻¹ respectively. Emissions associated to energy use and production were also quantified (60.5 kg CO₂ Mg OFMSW⁻¹ and 0.66 kg VOC Mg OFMSW⁻¹). Other relevant parameters such as energy and water consumption and amount of rejected waste were also determined. A new functional unit is presented to relate emission factors to the biodegradation efficiency of the composting process and consists in the reduction of the Respiration Index of the treated material. Using this new functional unit, the atmospheric emissions released from a composting plant are directly related to the plant specific efficiency.     

Source apportionment of urban fine and ultra-fine particle number concentration in a Western Mediterranean city

Extensive measurements on particle number concentration and size distribution (13–800 nm), together with detailed chemical composition of PM_2.5 have constituted the main inputs of the database used for a source apportionment analysis. Data were collected at an urban background site in Barcelona, Western Mediterranean.The source identification analysis helped us to distinguish five emission sources (vehicle exhausts, mineral dust, sea spray, industrial source and fuel-oil combustion) and two atmospheric processes (photochemical induced nucleation and regional/urban background particles derived from coagulation and condensation processes). After that, a multilinear regression analysis was applied in order to quantify the contribution of each factor.This study reveals that vehicle exhausts contribute dominantly to the number concentration in all the particle sizes (52–86%), but especially in the range 30–200 nm. This work also points out the importance of the regional and/or urban formed aerosols (secondary inorganic particles) on the total number concentration (around 25% of the total number), with a higher impact on the accumulation mode. The photo-chemically induced nucleation of aerosols only represents a small proportion of the total number as an annual mean (3%), but is very relevant when considering only the nucleation mode (13–20 nm) fraction (23%). The other sources recognized registered sporadic contributions to the total number, coinciding with specific meteorological scenarios.This study discloses the main sources and features affecting and controlling the fine and ultra-fine aerosols in a typical city in the Western Mediterranean coast. Whereas the road traffic appears to be the most important source of sub-micrometric aerosols, other sources may not be negligible under specific meteorological conditions.     

Physicochemical variations in atmospheric aerosols recorded at sea onboard the Atlantic–Mediterranean 2008 Scholar Ship cruise (Part I): Particle mass concentrations,size ratios,and main chemical components

We report on ambient atmospheric aerosols present at sea during the Atlantic–Mediterranean voyage of Oceanic II (The Scholar Ship) in spring 2008. A record was obtained of hourly PM₁₀, PM_2.5, and PM₁ particle size fraction concentrations and 24-h filter samples for chemical analysis which allowed for comparison between levels of crustal particles, sea spray, total carbon, and secondary inorganic aerosols. On-board monitoring was continuous from the equatorial Atlantic to the Straits of Gibraltar, across the Mediterranean to Istanbul, and back via Lisbon to the English Channel. Initially clean air in the open Atlantic registered PM₁₀ levels <10 μg m^?3 but became progressively polluted by increasingly coarse PM as the ship approached land. Away from major port cities, the main sources of atmospheric contamination identified were dust intrusions from North Africa (NAF), smoke plumes from biomass burning in sub-Saharan Africa and Russia, industrial sulphate clouds and other regional pollution sources transported from Europe, sea spray during rough seas, and plumes emanating from islands. Under dry NAF intrusions PM₁₀ daily mean levels averaged 40–60 μg m^?3 (30–40 μg m^?3 PM_2.5; c. 20 μg m^?3 PM₁), peaking briefly to >120 μg m^?3 (hourly mean) when the ship passed through curtains of higher dust concentrations amassed at the frontal edge of the dust cloud. PM₁/PM₁₀ ratios ranged from very low during desert dust intrusions (0.3–0.4) to very high during anthropogenic pollution plume events (0.8–1).     

Occurrence of cyclophosphamide and epirubicin in wastewaters by direct injection analysis–liquid chromatography–high-resolution mass spectrometry

Background, aim, and scope

According to the high incidence of cancer worldwide, the amount of cytostatic drugs administered to patients has increased. These compounds are excreted to wastewaters, and therefore become potential water contaminants. At this stage, very little is known on the presence and elimination of cytostatic compounds in wastewater treatment plants (WWTP). The aim of this study was to develop a liquid chromatography?Chigh-resolution mass spectrometry (LC?COrbitrap?CMS) method for the determination of cyclophosphamide and epirubicin in wastewaters. These compounds represent two outmost used cytostatic agents.

Materials and methods

Extraction and analytical conditions were optimized for cyclophosphamide and epirubicin in wastewater. Both solid-phase extraction using Oasis 200?mg hydrophilic?Clipophilic balanced (HLB) cartridges and direct injection analysis were evaluated. Mass spectral characterization and fragmentation conditions were optimized at 50,000 resolving power (full width at half maximum, m/z 200) to obtain maximum sensitivity and identification performance. Quality parameters (recoveries, limits of detection, and repetitivity) of the methods developed were determined, and best performance was obtained with direct water analysis of the centrifuged wastewater. Finally, this method was applied to determine the presence of cyclophosphamide and epirubicin in wastewaters from a hospital effluent, an urban effluent, and influents and effluents from three WWTP.

Results and discussion

Cyclophosphamide and epirubicin were recovered after 50?mL preconcentration on solid-phase extraction 200?mg Oasis HLB cartridges (87% and 37%, respectively), and no breakthrough was observed by extracting 500?mL of water. Limits of detection were of 0.35 and 2.77?ng/L for cyclophosphamide and epirubicin, respectively. On the other hand, direct injection of water spiked at 1???g/L provided recoveries of 107% for cyclophosphamide and 44% for epirubicin and limits of detection from 3.1 to 85?ng?L^?1, respectively. The analysis of wastewaters using direct injection analysis revealed the presence of cyclophosphamide and epirubicin in WWTP influents and hospital and urban effluents at levels ranging from 5.73 to 24.8???g?L^?1.

Conclusions

The results obtained in this study demonstrate the capability of LC?COrbitrap?CMS for accurate trace analysis of these very polar contaminants. This method permitted to identify cyclophosphamide and epirubicin in wastewaters and influents of WWTP, but no traces were detected in WWTP effluents. The methodology herein developed is sensitive and robust and applicable for screening of a large number of samples since no preconcentration is needed.     

Cytotoxic and genotoxic effects of metal(oid)s bioactivated in rocket leaves (Eruca vesicaria subsp. sativa Miller)

Rocket is an important source of essential elements. However, it may also accumulate toxic elements such as metal(oids). The objectives of the present work were (i) to study the uptake of arsenic, lead, cadmium and zinc in rocket grown in contaminated soils, (ii) to establish the genotoxic and cytotoxic activities of this vegetable material, and (iii) to study the modulator role of the glucosinolate and metal contents in the genotoxic/cytotoxic activities. Lead, cadmium and zinc leaf concentrations in our study were over the concentrations allowed by the statutory limit set for metal(oid) contents in vegetables. The accessions were non genotoxic at the different concentrations studied, although one of the accessions showed the highest mutation rates doubling those of negative control. The cytotoxicity assays with HL60 human leukaemia cells showed that the tumouricide activities of rocket leaves decreased with the increasing of metal(oid) concentrations and also with the decreasing of glucosinolate concentrations in their tissues. An interaction between metal(oid)s and glucosinolate degradation products contained in rocket leaves is suggested as the main modulator agents of the biological activity of the plants grown in metal-contaminated soils.     

Sources and Concentrations of Indoor Nitrogen Dioxide in Barcelona,Spain

Abstract

Sources and concentrations of indoor nitrogen dioxide (NO₂) were examined in Barcelona, Spain, during 1996– 1999. A total of 340 dwellings of infants participating in a hospital-based cohort study were selected from different areas of the city. Passive filter badges were used for indoor NO₂ measurement over 7–30 days. Dwelling inhabitants completed a questionnaire on housing characteristics and smoking habits. Data on outdoor NO₂ concentrations were available for the entire period of the study in the areas of the city where indoor concentrations were determined. Bivariate analysis was performed to investigate relationships between indoor NO₂ concentrations on one hand and outdoor NO₂ concentrations, housing, and occupant characteristics on the other. Stepwise multiple linear regression was performed with variables that were 1996 and 27.02 ppb in 1999, with the highest yearly value of 27.82 ppb in 1997. In the same time period, mean outdoor NO₂ concentration ranged between 25.26 and 25.78 ppb with a peak of 30.5 ppb in 1998. Multiple regression analysis showed that principal sources of indoor NO₂ concentrations were the use of a gas cooker, the absence of an extractor fan when cooking, and cigarette smoking. The absence of central heating was also associated with higher NO₂ concentrations. Finally, each ppb increase in outdoor NO₂ was associated with a 1% increase in indoor concentrations.     

Multivariant statistical analysis of PCDD/FS in sewage sludges from different areas of the Valencian Community (Spain)

The levels of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in 31 sewage sludges from different wastewater treatment plants corresponding to rural, urban and industrial areas in the Valencian Community (Spain) were analysed. Values of 5.1-346.2 ng I-TEQ kg(-1) (dry weight) were detected for sewage sludge with the highest value in one sample from an industrial area. Therefore the majority of the samples did not exceed the limit proposed (100 ng I-TEQ kg(-1)) by the [EU, 2000. Working document on sludge, 3rd draft. Brussels. Available from: http://europa.eu.int/comm/environment/waste/sludge/sludge_en.pdf] for use in agriculture. The dominant congeners for each family of compounds were 1,2,3,4,6,7,8-HpCDD and OCDD from PCDDs, and 1,2,3,4,6,7,8-HpCDF and OCDF from PCDFs. The total concentrations of PCDD/Fs were evaluated statistically through SPPS 11.0 for Windows. The principal component analysis (PCA) was used to extract two PCs as a linear combination of the original variables, one of them associated to urban+highly industrial areas and the other one to urban+low industrial areas. The linear regression method was applied and an efficient correlation was obtained between the total I-TEQ values for each sample and two of most abundant congeners (OCDF and OCDD). This expression was obtained with the results of the 31 samples analysed and a variety of data from other authors. Furthermore, several bilateral correlations between the different congeners completed the statistical analysis.     

Removal of PAHs from water using an immature coal (leonardite)

It has been studied an immature coal (leonardite) as an adsorbent for removing PAHs [fluorene, pyrene, benzo(k)fluoranthene, benzo(a)pyrene and benzo(g,h,i)perylene] from water. To determine the efficiency of leonardite as an adsorbent of PAHs, factors such as pH, contact time and equilibrium sorption were evaluated in a series of batch experiments. There were no significant differences in the removal percentages for the various pH values studied, except for fluorene. The adsorption of fluorene was higher at lower pH values. The equilibrium time was reached at 24h. At this time, more than 82% of the pyrene, benzo(k)fluoranthene, benzo(a)pyrene and benzo(g,h,i)perylene had been removed. During the first 2h, the adsorption rate increased rapidly. After that time, however, there was a minor decrease. Equilibrium data were fitted to Freundlich models to determine the water-leonardite partitioning coefficient. Physical adsorption caused by the aromatic nature of the compounds was the main mechanism that governed the removal process. The polarity of the humic substances in leonardite may also have influenced the adsorption capacity.     

Interaction between pollutants produced in sewage sludge combustion and cement raw material

Nowadays the use of waste as secondary fuel in clinker kilns is an extensive practice, but the interaction between cement raw material (CRM) and the combustion gases of the fuels has not been extensively studied. Because of that, in this work the effect of the interaction of exhaust from the combustion of sewage sludge and CRM has been studied in a laboratory furnace. The experiments were performed at 300 degrees C, close to the temperature at the cyclones in a cement industry. The behavior of volatile compounds, polycyclic aromatic compounds (PAH) and polychloro dibenzo-p-dioxin and polychloro dibenzofurans (PCCD/F) were analysed in the presence or absence of CRM. The results obtained show that the presence of CRM at the outlet of the combustion gases is beneficial for the decrease of pollutant emissions.