Heavy metals in untreated/treated urban effluent and sludge from a biological wastewater treatment plant

Background, Aim and Scope

The presence of heavy metals in wastewater is one of the main causes of water and soil pollution. The aim of the present study was to investigate the removal of Cd, Cu, Pb, Hg, Mn, Cr and Zn in urban effluent by a biological wastewater treatment, as well as to quantify the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sn, Tl, V and Zn in dewatering sludge from the Biological Wastewater Treatment Plant to Ribeirão Preto (RP-BWTP), Brazil.

Materials and Methods

Concentrations of Cd, Cr, Cu, Mn and Pb in wastewater and those of Ni in sludge were determined by atomic absorption spectrophotometry with graphite furnace atomization. Mercury concentrations in wastewater were measured by hydride generation atomic spectrophotometry, and Zn levels were determined by atomic absorption spectrophotometry using acetylene flame. In sludge, the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Sn, Tl, V and Zn were determined by inductively coupled plasma-mass spectrometry.

Results

The percentages of removal efficiency (RE) were the following: Hg 61.5%, Cd 60.0%, Zn 44.9%, Cu 44.2%, PB 39.7%, Cr 16,5% and Mn 10.4%. In turn, the mean concentrations (mg/kg) of metals in dewatering sludge followed this increasing order: Tl (<0.03), Hg (0.31), Be (0.43), As (1.14), Cd (1.34), V (59.2), Pb (132.1), Sn (166.1), Cr (195.0), Mn (208.1), Ni (239.4), Cu (391.7), Zn (864.4) and Fe (20537).

Discussion

The relationship between metal levels in untreated wastewater, as well as the removal efficiency are in agreement with previous data from various investigators, It is important to note that metal removal efficiency is not only affected by metal ion species and concentration, but also by other conditions such as operating parameters, physical, chemical, and biological factors.

Conclusions

Metal values recorded for treated wastewater and sludge were within the maximum permitted levels established by the Environmental Sanitation Company (CETESB), São Paulo, Brazil.

Recommendations

There is an urgent need for the authorities who are responsible for legislation on sludge uses in agriculture of establishing safety levels for As, Be, Hg, Sn, Tl and V.

Perspectives

According to the current metal levels, RP-BWTP sludge might be used for agriculture purposes. However, for an environmentally safe use of sewage sludge, further studies including systematic monitoring are recommended. Annual metal concentrations and predicted variations of those elements in the sludge should be monitored.

     

Dioxin formation in pulp and paper mills of India

Samples of effluents, sludge, pulp, final products (paper) and soil were collected from the identified pulp and paper mills in India. The samples were analysed for 2,3,7,8-tetrachloro-dibenzo-p-dioxin (2,3,7,8-TCDD) and other dioxin congeners and precursors. Pulp and paper mills using chlorine for the bleaching process showed the presence of 2,3,7,8-TCDD in effluent samples. In the effluent and pulp samples from mills where chlorine dioxide was used as a bleaching agent, the 2,3,7,8-TCDD congener ranged from below the detection limit 0.05 to 0.12 ngL⁻¹/ngg⁻¹. The relative standard deviation of reproducibility and the percent recovery of 2,3,7,8-TCDD were 2.07 and 82.4% in pulp and 2.8 and 92% in effluent, respectively. The 1,3,6,8-TCDD was the only other major dioxin congener found in the treated and untreated effluent and sludge samples. However, dichlorobenzene, trichlorophenyl, and hexachlorobiphenyl were detected in all samples. The formation of dioxins can be minimised by replacing chlorine with chlorine dioxide in bleaching processes in pulp and paper mills.     

The concentrations and distribution of polycyclic musks in a typical cosmetic plant

Polycyclic musks [cashmeran (DPMI), celestolide (ADBI), phantolide (AHMI), traseolide (ATII), tonalide (AHTN) and galaxolide (HHCB)] in the air, wastewater, sludge samples of a typical cosmetic plant were analyzed. DPMI, ADBI, HHCB and AHTN were found in all samples, and ATII was not found in any sample. HHCB and AHTN were the major components in all samples. The polycyclic musk concentrations were very high in the air of the cosmetic plant, and polycyclic musks were mostly contained in the gas phase at the percentage of 86.35-97.70%. Average polycyclic musk concentrations in effluent were high, and ranged from 0.62 to 32.06 microgl-1. The removal efficiency during the active sludge wastewater treatment was also high, resulting from the adsorption of those compounds into the sludge. So the polycyclic musk concentrations were very high in the primary sludge and second sludge, and ranged from 1.78 to 92.45 mgkg-1 (dry), and from 2.87 to 65.67 mgkg-1 (dry), respectively. Results suggested that the sludge needed to be further treated to make polycyclic musks less influence to the environment.     

模拟酶蛋白结合物替代HEMIN测定大气过氧化物

在选择最佳测定条件的基础上,对比了模拟酶蛋白结合物和ＨＥＭＩＮ对过氧化物的测定效果。结果表明,ＨＥＭＩＮ－ＢＳＡ效果最好,其对过氧化物的荧光响应信号约是ＨＥＭＩＮ的２倍,该物质在不改变激发和发射光谱的前提下可增强反应活性,提高反应灵敏度,使方法检测限降低至使用ＨＥＭＩＮ时的１／３左右,最低线性值降至原来的１／５左右,同时,精度亦有所提高。     

离子色谱法测定大气中的甲磺酸

建立了以玻璃纤维膜-KB120气溶胶采样器采集大气中甲磺酸的采样方法;以0.1mmol·l-1H3BO3/0.1mmol·l-1 Na2B4O7为淋洗液的甲磺酸离子色谱分析方法.分析方法的精密度和准确度分别为5%和4%.并实测了青岛冬季大气气溶胶中MSA,SO2-4和NO-3的平均浓度分别为0.10μg·m-3,30.40μg·m -3和17.98μg·m-3.     

Chemical composition of the slippery epicuticular wax blooms on Macaranga (Euphorbiaceae) ant-plants

Summary. The stems of many Macaranga ant-plants (Euphorbiaceae) are covered by epicuticular wax crystals rendering the surface very slippery for most insects. These wax blooms act as selective barriers protecting the symbiotic ant partners, which are specialized “wax-runners”, against the competition of other ants. Glaucous stems occur almost exclusively among the ant-plants of the genus Macaranga (). We analyzed the cuticular lipids of 16 Macaranga species by GC-MS and investigated the wax crystal morphology using SEM. Presence of crystalline wax blooms was strongly correlated with high concentrations (52%–88%) of triterpenoids. In contrast epicuticular waxes of glossy Macaranga surfaces contained only 0% to 36% of these dominant components. Therefore we conclude that triterpenoids are responsible for the formation of the thread-like Macaranga wax crystals. In all Macaranga ant-plants investigated, the principal components were epitaraxerol and taraxerone accompanied by smaller portions of taraxerol, β-amyrin and friedelin. Only in the case of the non-myrmecophytic M. tanarius did β-amyrin predominate. Moreover, we found that only in M. tanarius, the dense wax crystal lacework is torn into large mosaic-like pieces in the course of secondary stem diameter growth. Both chemical and macroscopic differences may contribute to a reduced slipperiness of M. tanarius stems and appear to be functionally important. The distribution of wax crystals and their composition amongst different sections of the genus suggests that glaucousness is a polyphyletic character within Macaranga. Received 7 October 1999; accepted 3 December 1999     

Energy use,blue water footprint,and greenhouse gas emissions for current food consumption patterns and dietary recommendations in the US

This article measures the changes in energy use, blue water footprint, and greenhouse gas (GHG) emissions associated with shifting from current US food consumption patterns to three dietary scenarios, which are based, in part, on the 2010 USDA Dietary Guidelines (US Department of Agriculture and US Department of Health and Human Services in Dietary Guidelines for Americans, 2010, 7th edn, US Government Printing Office, Washington, 2010). Amidst the current overweight and obesity epidemic in the USA, the Dietary Guidelines provide food and beverage recommendations that are intended to help individuals achieve and maintain healthy weight. The three dietary scenarios we examine include (1) reducing Caloric intake levels to achieve “normal” weight without shifting food mix, (2) switching current food mix to USDA recommended food patterns, without reducing Caloric intake, and (3) reducing Caloric intake levels and shifting current food mix to USDA recommended food patterns, which support healthy weight. This study finds that shifting from the current US diet to dietary Scenario 1 decreases energy use, blue water footprint, and GHG emissions by around 9 %, while shifting to dietary Scenario 2 increases energy use by 43 %, blue water footprint by 16 %, and GHG emissions by 11 %. Shifting to dietary Scenario 3, which accounts for both reduced Caloric intake and a shift to the USDA recommended food mix, increases energy use by 38 %, blue water footprint by 10 %, and GHG emissions by 6 %. These perhaps counterintuitive results are primarily due to USDA recommendations for greater Caloric intake of fruits, vegetables, dairy, and fish/seafood, which have relatively high resource use and emissions per Calorie.     

Policy evaluation of vehicle exhaust standards in Japan from 1995 to 2005 based on two human health risk indices for air pollution and global warming

Measures for vehicle exhaust emissions aimed at reducing either air pollution or global warming could have counterproductive effects on one another. Increasing diesel passenger vehicles, which generally have lower CO₂ emissions than gasoline counterparts, leads to increasing particulate matter (PM) emissions, while gasoline has lower PM emissions than diesel. It is said that stringent limits on PM emission factors discourages improved CO₂ emission factors. Without including both effects in a risk evaluation, one cannot evaluate whether the total risk is reduced or not. Hence, we evaluated representative exhaust emission measures based on risk evaluation for both air pollution and global warming. Considering consumer choice between diesel and gasoline passenger vehicles and emissions standards adopted in Japan from 1995 to 2005, we built five cases for vehicle policy evaluation. For each case, we estimated disability-adjusted life years (DALY) as an index of human health risk caused by lung cancer linked to inhalation exposure of elemental carbon in PM as well as due to global warming linked to CO₂. The results of our risk evaluation reveal that the case adopting the 2005 new long-term Japanese emission standard reduces the human health risk caused by lung cancer due to air pollution by 0.6 × 10³ DALY, but would increase the risk due to global warming by 31.9 × 10³ DALY compared with the case of adopting EURO 4, for the same conditions of passenger vehicle choice from 1995. These results suggest that the characteristics of Japanese emissions standards are mainly designed to reduce air pollution.     

Drinking water risk assessment in practice: the case of Swedish drinking water producers at risk from floods

To achieve a safe and reliable drinking water supply, water producers need to manage a large range of risks regarding both water quality and quantity. A risk management approach where risks are systematically identified and handled in a preventive manner is promoted by the World Health Organization and supported by researchers and drinking water experts worldwide. Risk assessment is an important part of such a management approach, and a variety of tools for risk assessment are described in the literature. There is, however, little knowledge of how drinking water risk assessment is performed in practice, including which tools that are actually used. This study investigates the use of risk assessment tools, and the approach to risk management, on a local level in the Swedish water sector. It is based on interviews with key persons from a targeted selection of water producers. We find that the application of tools as well as the approach to risk assessment and management differs considerably between the water producers. The tools most frequently used are mainly the ones promoted or required by Swedish national organizations. Although many of the water producers have done some kind of risk assessment, most have not implemented a risk management approach. Furthermore, their knowledge of the concepts of risk and risk management is often limited. The largest challenge identified is to prioritize risk assessment, so that it is actually performed and then used as a basis for managing risk in a systematic way.