Effects of Natural and Artificial Weathering on the Physical Properties of Recycled Poly(ethylene terephthalate)

In accelerated weathering tests, specimens are exposed to higher radiation intensity, temperature and humidity than is likely under natural weathering in order to achieve rapid degradation of the polymer in a convenient short time. In the current work, a correlation between the two environments is attempted so that a prediction of lifetimes in the natural environment can be achieved. During aging, surface flaws are created due to the chain scission process. This is initiated by the absorption of ultra-violet light and directly affects visual appearance and impact strength. After natural weathering, the material shows only plastic deformation in an impact test. However, after artificial weathering to 5000 h of UV exposure, there is a decrease of 85% in impact strength. Colour change occurs at a high rate in the early stages of UV exposure. Beyond 2000 h of exposure, the colour change approaches a steady state and a correlation between the changes under natural and artificial weathering becomes apparent for a potential prediction of lifetimes. From the analysis including the specular component (SCI), taking surface roughening into account, 1 year under natural weathering was found to be equivalent to 25 days under accelerated weathering.     

Delineation of potential ground water-bearing zones in the Barind tract of West Bengal,India

The Barind tract of West Bengal is an area of tropical sub-humid region composed of old alluvial soil. The area has high water demand due to growing population pressure and intensification in agricultural activity. These create huge stress on surface and ground water availability. Continuous withdrawal of ground water has become an alternative source of irrigation water which has also again made the condition critical. Ground water level has been lowered down drastically in many parts in this region. Under this circumstance, it is necessary to delineate potential ground water-bearing layers. Therefore, the present study attempts to identify potential ground water-bearing zones to manage ground water effectively. Instead of usually used parameters for ground water potentiality delineation here only some particular litholog parameters like breadth of water-bearing layer, depth of water-bearing layer, presence of clay layer above or below major water-bearing layer have been considered for delimiting the same. The result shows that out of total area, 60% area (405,382.2 ha) falls under very low to low potential ground water-bearing zone and only 8.19% area (55,634.97 ha) is potential. Considering this spatial pattern of ground water availability, harvesting structure and magnitude of water withdrawing should be designed.     

Developing biodiversity indicators on a stakeholders’ opinions basis: the gypsum industry Key Performance Indicators framework

This study aims to establish a common Key Performance Indicators (KPIs) framework for reporting about the gypsum industry biodiversity at the European level. In order to integrate different opinions and to reach a consensus framework, an original participatory process approach has been developed among different stakeholder groups: Eurogypsum, European and regional authorities, university scientists, consulting offices, European and regional associations for the conservation of nature, and the extractive industry. The strategy is developed around four main steps: (1) building of a maximum set of indicators to be submitted to stakeholders based on the literature (Focus Group method); (2) evaluating the consensus about indicators through a policy Delphi survey aiming at the prioritization of indicator classes using the Analytic Hierarchy Process method (AHP) and of individual indicators; (3) testing acceptability and feasibility through analysis of Environmental Impact Assessments (EIAs) and visits to three European quarries; (4) Eurogypsum final decision and communication. The resulting framework contains a set of 11 indicators considered the most suitable for all the stakeholders. Our KPIs respond to European legislation and strategies for biodiversity. The framework aims at improving sustainability in quarries and at helping to manage biodiversity as well as to allow the creation of coherent reporting systems. The final goal is to allow for the definition of the actual biodiversity status of gypsum quarries and allow for enhancing it. The framework is adaptable to the local context of each gypsum quarry.     

Biodegradation characteristics of organic matters in swine carcasses under different initial operating conditions of simulated anaerobic lysimeter

This study was aimed to investigate the biodegradation characteristics of organic matters in swine carcasses. The lysimeters were simulated with different initial operating conditions: 30 % volumetric moisture content and no sludge addition for lysimeter A (control), 30 % volumetric moisture content and anaerobic sludge addition for lysimeter B, and 40 % volumetric moisture content and anaerobic sludge addition for lysimeter C. The degradation efficiency (18.4 %) of lysimeter B was higher than that (15.2 %) of lysimeter A due to anaerobic sludge addition. Lysimeter B showed higher CH₄ yield (15.6 L/kg VS) and CH₄ production rate (0.41 L/kg VS days) compared to lysimeter A by 31 % and 14 %, respectively. In addition, the degradation efficiency improved from 18.4 % (lysimeter B) to 26.3 % (lysimeter C) by increasing volumetric moisture content. The CH₄ yield (22.9 L/kg VS) and CH₄ production rate (0.68 L/kg VS days) of lysimeter C were higher than those of lysimeter B, respectively. Total organic carbon (TOC) removed in lysimeter C was converted to leachate (20.3 %) and gas (6.0 %), whose values were higher than those of lysimeter A and B. These results demonstrated that the proper control of initial operating conditions could accelerate the anaerobic degradation of organic matters in swine carcasses.     

Toxicity of urban highway runoff in Shanghai to Zebrafish (Danio rerio) embryos and luminous bacteria (Vibrio qinghaiensis.Q67)

Pollution from urban highway runoff has been identified as one of the major causes of the deterioration of receiving water quality. The purpose of this study is to assess the toxicity of urban storm water samples in Shanghai using the zebrafish (Danio rerio) embryo test and the bacterial luminescence (Vibrio qinghaiensis) assay. The toxicity of highway runoff from seventeen storm events was investigated in both grab and composite samples. Zebrafish embryos were exposed to the runoff samples and development parameters including lethality, spontaneous movements in 20 s, heart beat rate, hatching rate, and abnormality of zebrafish embryos were observed after 24, 48, 72, and 96 h of exposure. Inhibition rates of luminescence intensity were also recorded. The results showed that in the zebrafish embryo toxicity tests, both grab and composite samples increased the lethality, reduced the percentage with spontaneous movements and heart beats, inhibited the hatching of embryos, and induced morphological abnormalities. In the Vibrio qinghaiensis toxicity test, all the grab samples inhibited the luminescence, while some of the composite samples promoted it, which indicated that different types of toxicants might have been affecting the species. The multivariate statistics analysis indicated that heavy metal (zinc, manganese, and copper) and PAHs might mainly contribute to the toxicity of runoff samples.     

Efficient abatement of an iodinated X-ray contrast media iohexol by Co(II) or Cu(II) activated sulfite autoxidation process

Efficient abatement of an iodinated X-ray contrast media iohexol by an emerging sulfite autoxidation advanced oxidation process is demonstrated, which is based on transition metal ion–catalyzed autoxidation of sulfite to form active oxidizing species. The efficacy of the combination of sulfite and transition metal ions (Ag(I), Mn(II), Co(II), Fe(II), Cu(II), Fe(III), or Ce(III)) was tested for iohexol abatement. Co(II) and Cu(II) are proven to show more pronounced catalytic activity than other metals at pH 8.0. According to the quenching studies, sulfate radical (SO₄^??) is identified to be the primary species for oxidation of iohexol. Increasing dosages of metal ion or sulfite and higher pH values are favorable for iohexol abatement. Inhibition of iohexol abatement is observed in the absence of dissolved oxygen, which is vital for the production of SO₅^?? and subsequent formation of SO₄^??. Overall, activation of sulfite to produce reactive radicals with extremely low Co(II) or Cu(II) concentrations (in the range of μg L^?1) in circumneutral conditions is confirmed, which offers a potential SO₄^??-based advanced oxidation process in treatment of aquatic organic contaminants.

     

Mobility of free surface in different liquids and its influence on water striders locomotion

Dynamics of the surface layer in different liquids is examined by means of infrared thermography of the surface and simultaneous velocity fields measurements using surface and infrared Particle Image Velocimetry. This technique allows measurements and comparison of two velocity fields—at the surface and at small depth about 50–200 μm. In distilled water the velocity fields at the surface and at small depth exhibit significant dissimilarity. The flow field below the surface is essentially 3D, whereas the surface flow is characterized by vanishing 2D divergence of velocity, indicating predominantly planar motion. In contrast, in ethanol–butanol mixture two velocity fields are well correlated, both corresponding to 3D flow with continuous surface renewal. Thermal patterns, observed at the surface, and the flow field structure in different liquids are associated with different boundary conditions for velocity at the surface. Water surface is seldom renewed, which inhibits heat and mass exchange between the liquid and atmosphere. However, absence of vertical advection also enables organisms to live within the surface layer, to stand and walk on the free surface. This is illustrated by the difficulties a water strider faces on the surface of ultrapure water, which exhibits Marangoni convection.     

Assessing relative vulnerability to sea-level rise in the western part of the Mekong River Delta in Vietnam

The Mekong River Delta in Vietnam plays a crucial role for the region in terms of food security and socioeconomic development; however, it is one of the most low-lying and densely populated areas in the world. It is vulnerable to seawater incursion, flood risk, and shoreline change, exacerbated as a consequence of sea-level rise (SLR) related to climate change. This study examined the Kien Giang coast in the western part of the delta, comprising seven coastal districts (namely Ha Tien, Kien Luong, Hon Dat, Rach Gia, Chau Thanh, An Bien, and An Minh), the economy of which is important in terms of agriculture and aquaculture. The analytical hierarchical process (AHP) method of multi-criteria decision making was integrated directly into geographic information systems (GIS) to derive a composite vulnerability index that indicated areas most likely to be vulnerable to SLR. The hierarchical structure comprised three key components: exposure (E), sensitivity (S), and adaptive capacity (A), at level 1. At the next level, 8 sub-components were mapped: seawater incursion, flood risk, shoreline change, population characteristics, land use/land cover, and socioeconomic, infrastructure, and technological capability, beyond which a further 22 variables (level 3) and 24 sub-variables (level 4) related to vulnerability were also mapped. Variables were assigned weights for incorporation into AHP pairwise comparisons after discussion with stakeholders. Maps were generated to visualise areas where the relative vulnerability was very low, low, moderate, high, and very high. Societal data were generally only available at district level; however, several regional patterns emerged. Relatively high exposure to flooding and inundation, salinity, and moderate loss of mangroves occurred along the coastal fringe of each district. This western section of the delta, which is low-lying and remote from the distributaries that carry sediment to the coast, appears to be particularly vulnerable. The most sensitive areas tended to be ethnic households engaged in rice cultivation and with moderate population density. The least adaptable areas consisted of high numbers of poor households, with low income, and moderate densities of transport, irrigation and drainage systems. Most coastal districts were determined to be moderately to relatively highly vulnerable, with scattered hotspots along the coast.