Decolorization of dye solutions with Ruditapes philippinarum conglutination mud and the isolated bacteria

Application of Ruditapes Philippinarum conglutination mud (RPM) for decolorizing synthetic dye solutions was studied. RPM showed good activity for decolorization of Methylene Blue, Crystal Violet, Malachite Green, and Ink Blue. The amount of the RPM had great effect on the decoloration rate of the dye solutions. However, the decoloration rate did not continue to increase when the amount of mud exceeded the optimum dose. The temperature of the dye solution had a remarkable effect on the decolorization rate of Ink Blue solution, but had little effect on the other three dye solutions. The initial pH of the dye solutions evidently affected the decolorization rate of Malachite Green solution, but had less effect on the other three. The decolorization rate of the dye solutions increased significantly with treatment time within 8 hr, but tended to be steady after 8 hr for Methylene Blue, Crystal Violet and Malachite Green solutions, and after 12 hr for Ink Blue solution. The decolorization efficiencies for the four dye solutions under the optimum conditions were all above 90%. Seventeen strains screened from RPM showed flocculation ability for kaolin clay suspension. Out of them, the flocculation rate of strain ZHT3-9 and strain ZHT4-13 were up to 88.14% and 86.01%, respectively. ZHT3-9 was studied, and its decolorization rate for Methylene Blue, Crystal Violet, and Malachite Green reached 90.02%, 89.21%, and 80.29%, respectively. By morphological, physiological and biochemical characteristics analysis and 16S rRNA sequencing, the strain ZHT3-9 was identified as Arthrobacter sp.     

火焰原子吸收光谱法测定电镀废水中高浓度的锡

采用盐酸消解样品,用火焰原子吸收光谱法测定电镀废水中高浓度的锡的质量浓度,方法简单可靠。通过实验样品的分析,验证了方法的准确度和精密度。该方法干扰少,数据准确,适合废水分析。     

SCADA系统在污染物治污工况在线监控系统中的应用

本文介绍了SCADA系统在内蒙古自治区重点污染源治污工况在线监控系统中的应用,系统以西门子成熟S7—200系列可编程序控制器为在线监测设备,基于OPC（OLE for Process Control）技术,以WINCC为监控平台,实现了自治区内重点污染源企业治污工况的远程监测、污染物排放的有效管理。     

三丁基锡生殖毒性的研究进展

有机锡化合物,特别是三丁基锡,广泛存在于环境中,对生物体以及生态环境存在着潜在的威胁。本文综述了三丁基锡对软体动物、鱼类和哺乳动物生殖机能的影响及其其可能的作用机制,指出了进一步的研究方向。     

PAS-PDMDAAC复合混凝剂研究

以Al2（SO）4和PDMDAAC为原料进行了无机-有机复合絮凝剂的复合实验研制,确定其制备工艺条件,并对油田现场采集的钻井废水作絮凝沉降实验,所研制的PAS-PDMDAAC复合絮凝剂对COD的去除效率可大大提高.     

南京市氮氧化物排放行业分布特征及减排对策

采用污染源普查资料与实地调查相结合的方法,对南京市各行业氮氧化物(NOx)排放源及排放量进行调查和梳理。结果表明:各行业NO x排放分担率依次为电力41%、机动车25%、钢铁10%、水泥9%、石化7%、其它工业5%、居民生活3%。针对南京市现状,对重点排放源提出了NO x减排措施与对策。     

饮用水源地的水华对人体健康风险评价

饮用水源地的水华现象近年来在世界各地不断爆发,给人类饮水安全造成极大的威胁。本文通过检测微囊藻毒素和三卤甲烷类物质,利用急性暴露安全阈值（浓度）计算模型,计算出了各自的急性暴露安全阅值,并对健康风险进行了评价。     

上海市环保行政审批系统的设计与实现

上海市环保局行政审批系统采用流程控制和数据传输交换技术,构建了申报系统、审批系统、业务管理系统、跟踪监控系统四部分,实现了包括建设项目环评、固废、辐射等15项行政审批和23项非行政审批事项的“一口受理、一办到底”,通过信息技术实现了外网申报、内网审批,实现了环保审批流程优化再造和审批全过程公开透明,实现了“便民审批”、“高效审批”、“阳光审批”。     

光学气体成像技术在泄漏检测与维修中的应用研究

通过介绍光学气体成像技术的原理、泄漏检测与维修关键技术、甲烷气体泄漏检测与识别实验情况,讨论了该技术在石化生产过程中的应用发展趋势。     

中国危险废物和医疗废物焚烧处置行业二（口恶）排放水平研究

通过调研全国危险废物和医疗废物焚烧处置设施,对包含二噁英排放水平的设施按处置对象、炉型和处理量分类,并作系统分析和研究.结果表明现有危险废物焚烧设施烟气中二噁英的浓度比医疗废物低,达标率为74.19%;危险废物选用回转窑处置效果较好,达标率为66.67%;而医疗废物选用回转窑或热解炉,要综合考虑处置规模、生产成本和二英排放总量等因素;危险废物介于10~30 t·d-1和医疗废物介于10~20 t·d-1的处置设施要尤其注意二噁英的排放问题;医疗废物焚烧飞灰中二噁英的均值浓度为危险废物6倍以上,仅有16.67%满足填埋要求.二者烟气中二英的浓度分布以1,2,3,4,6,7,8-HpCDF、2,3,7,8-TCDF和OCDD为主.