Contributions of flumequine and nitroarenes to the genotoxicity of river and ground waters

The SOS/umuC assay was performed in conjunction with analytical measurements to identify potential genotoxins in river and adjacent ground waters in the Jialu River basin, China. The major genotoxic activities of the river and adjacent ground waters occurred in the same two fractions (F4 and F11) when assayed using the Salmonella typhimurium strain TA1535/pSK1002. This indicates that ground water near the Jialu River was influenced by the river water. LC-MS/MS analysis indicated that flumequine accounted for 86% and 76% of the genotoxicity in fraction F11 of the river and adjacent ground waters, respectively. When HPLC fractions were tested using the strain NM3009, three fractions showed genotoxic activities for river water sample, while no fractions from ground water samples elicited genotoxic activities. The specific response to the strain NM3009 in one fraction compared with the strain TA1535/pSK1002 suggested the presence of nitroarenes. However, we failed to identify the exact nitroarenes when GC-MS analysis was used to analyze nitroarenes which are well detected in air and soil samples in previous papers.     

Distribution of polybrominated diphenyl ethers in breast milk from North China: Implication of exposure pathways

The breast milk concentrations of polybrominated diphenyl ethers (PBDEs; sum of eight congeners: BDE-28, 47, 99, 100, 153, 154, 183 and 209) were determined (by high resolution gas chromatographic high resolution mass spectrometry) in samples from primiparous women collected in 2006 in Tianjin, China. Dietary and lifestyle habits of the participants were obtained by questionnaires. The median total PBDE concentration (including BDE-28, 47, 99, 100, 153, 154, 183) was 2500 pg g⁻¹ lipid weight, ranging from 1700 to 4500 pg g⁻¹ lipid weight. These levels were in the same range as those from Europe and Japan but much lower than those from North America. The congener profile in China was also different from other countries. The contribution of BDE-28 was around 15%, much higher than any other country, implying that a different Penta-BDE formulation might be used in the Chinese market. The lower ratio of the sum of BDE-47, 99, and 100 to the sum of BDE-153 and 154 suggested that Octa-products were in more demand in China. A significant correlation was found between a woman’s PBDE concentration and the time she used electronic appliances (h/d). This implies that electronics are a potential source of PBDEs to people. Inhalation or ingestion of particulate matter (such as dust) may also be an important exposure pathway. There was no significant correlation between the PBDE concentration and the consumption of meat, fish, and milk. Further research is needed to determine the specific contribution of each exposure route and their health effects.     

Levels and speciation of arsenic in the atmosphere in Beijing, China

Arsenic levels and speciation in the total suspended particles (TSPs) were quantitatively determined by high performance liquid chromatography on-line coupled with hydride generation atomic fluorescence spectrometry in Beijing, China from February 2009 to March 2011. The high TSP levels fluctuated between 0.07 and 0.79 mg m⁻³, with a mean level of 0.32 ± 0.17 mg m⁻³. The total arsenic concentrations ranged from 0.03 to 0.31 μg m⁻³ (mean: 0.13 ± 0.06 μg m⁻³) in Beijing‘s air. The concentrations of As(III) and As(V) ranged from 0.73 to 20 ng m⁻³ (mean: 4.7 ± 3.6 ng m⁻³) and from 14 to 2.5 × 10² ng m⁻³ (mean: 67 ± 35 ng m⁻³), respectively. As levels and speciation demonstrated relative higher levels in spring and autumn and lower values in summer and winter. As(V) accounted for 81-99% of the extractable species in the TSP samples which showed that As(V) was the major fraction of the extractable As. Organoarsenic species, monomethylarsonate (MMA) and dimethylarsinate (DMA) were not found in all samples. Higher values of enrichment factors demonstrated that arsenic in TSP mainly come from anthropogenic sources. High As and its species levels in air and respiratory exposure (0.30-0.84 μg d⁻¹) attributed to higher excess cancer risk ((4.2 ± 2.0) × 10⁻⁴) for people in Beijing.     

Differences between carbon dioxide levels over suburban and rural sites in Northern Spain

Purpose  

A comparison between suburban and rural atmospheric carbon dioxide concentrations in Northern Spain is made.     

侧沟式一体化OCO工艺中DO和C/N对同步硝化反硝化的影响

以自配模拟生活污水为处理对象,研究了不同DO和C/N对侧沟式一体化OCO反应器同步硝化反硝化和COD降解效果的影响。实验结果表明,维持进水COD均值约为300 mg/L,TN约为40 mg/L,MLSS约为2 600 mg/L,进水流量为20 L/h时,COD去除率随着DO的增大逐步提高,当好氧区DO均值约为2.0 mg/L时,同步硝化反硝化效果最好,TN去除率达到了80%以上;维持好氧区DO均值约为2.0 mg/L,MLSS约为2 600 mg/L,进水流量为20 L/h时,不同C/N对COD去除率影响不大,当进水C/N约为8时,同时硝化反硝化效果最好,TN去除率均值达到了82%。     

改性多壁碳纳米管对水中Cd2+的去除

为了增加多壁碳纳米管(multiwall carbon nanotubers,MWNTs)对水中Cd2+的吸附量,使用混酸对多壁碳纳米管进行氧化处理,采用红外光谱进行结果表征,并探讨了吸附时间、pH值和MWNTs的使用量、Cd2+的浓度及干扰离子对镉离子吸附的影响。结果表明,吸附时间为1.5 h、pH为5.3、吸附效果最佳,随MWNTs量的增加Cd2+去除量增加,共存的阳离子会降低对Cd2+的吸附效果,对Cd2+的吸附符合Longmuir吸附定律。研究同时表明,pH小于2时Cd2+能容易从碳纳米管上解吸。初步探讨了Cd2+吸附机制。     

铅锌冶炼行业循环经济产业链构建

运用循环经济理论,以某铅锌冶炼企业为例,在分析企业能流、物流的基础上,研究了企业的循环经济发展潜力,提出了铅锌冶炼行业"冶炼-制酸-发电-贵金属回收"的循环经济发展产业链模式.研究结果表明,通过构建铅锌冶炼企业循环经济产业链,可以提高企业的资源利用效率,降低能耗和生产成本,减少污染物的排放,获得显著的经济效益和环境效益.     

Identification of Pollution Source of Cadmium in Soil. Application of Material Flow Analysis and A Case Study in Taiwan (11 pp)

Background Since the 1970s, at least 200 hectares (ha) of farmland has been polluted by the heavy metal cadmium (Cd).Consequently, the Cd pollution has led to contaminate the rice production and caused acute social panic. According to the recent investigation results performed by the Taiwan Environmental Protection Administration (TEPA), it is indicated that most of the Cd pollution incidents in Taiwan resulted from the wastewater discharge of stearate Cd factories. To prevent the Cd pollution incidents from spreading, the TEPA has either forced these factories to close down or assisted them in improving their production processes since the 1980s. Unfortunately, accidental incidents of Cd pollution still emerge in an endless stream, despite the strict governmental controls placed on these questionable factories. Whether this pollution has resulted from undetected or hidden pollution sources stemming from two decades ago or comes from some new source, will be an outstanding issue. Therefore, this study attempts to identify the pollution sources of Cd in soil in Taiwan as well as to find the solution to the above-mentioned, outstanding issue by way of a methodology termed Material Flow Analysis (MFA). Method logy. The MFA has proved to be a useful tool on providing quantitative information of the flow of substances through an economic to an environmental system. Based upon the supply-and-demand theory of MFA, researchers have successfully conducted an overview of the use of materials in many industries, the construction industry being one of these. Therefore, this study tries to establish a set of analytical processes by way of MFA for identifying the pollution source of Cd in soil in Taiwan. In addition, the spirit of Life Cycle Analysis (LCA) technique was also employed to identify the materials, and products should be ignored as a crucial pollution source in this study. Results and Discussion According to the MFA methodology applied in this study and on the basis of related studies performed by Taiwanese governmental authorities, we arrive at the following analysis results: (1) the total amount of Cd from the economic perspective of material and product flow was approximately 441.2 tons; (2) the wastewater directly discharged into irrigation water can be concluded to be the major pollution route of Cd in farmland soil in Taiwan; (3) material plastic stabilizer (cadmium oxide, CdO), Zn-Pd compounds and Cu compounds should be the crucial pollution sources to contaminate environment through the route of wastewater in Cd flow analysis; (4) the crucial pollution sources to contaminate environment through the route of wastewater in Cd flow analysis were five factories, Coin, Jili, Taiwan Dye, Guangzheng and Mingguan, and they were all categorized as stearate Cd industries; (5) the typical source of the Cd pollution in soil in Changhua County through the pollution route of wastewater should be the metal surfacing process industries. Conclusions This study proved that MFA can be a good tool for identifying Cd flow as well as for recognizing the crux of the problem concerning incidents of Cd pollution. This study led to the conclusion that the causal relationship between farmland pollution caused by Cd and stearate Cd factories in Taiwan seemed quite close by way of MFA methodology. In addition, this study also found that the wastewater discharged from a single metal surfacing process factory will not cause remarkable farmland pollution. However, the wastewater simultaneously discharged from a group of pollution factories can result in a significant pollution incident. Recommendations and Outlook This case study is only a small contribution to the understanding of the toxic material flow related to Cd in the environment. This study recommends that Taiwanese governmental authorities should not deal with problems on an ad hoc basis, but should instead deal with Cd pollution problems overall employing control measures. Finally, the more accurate information or data we can collect, the more reliable results we can identify. Therefore, the quality and quantity of related data used in this MFA model should be closely scrutinized in order to ensure the most correct and comprehensive investigation on the toxic material flow.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

Evolution of heavy metal speciation during the aerobic composting process of sewage sludge

The contents of heavy metals and their bioavailability to the soil-plant system were the major limitation to the application of sewage sludge compost in soil. This study was conducted to determine the evolution of heavy metal speciation in the course of an aerobic composting, and investigate the influence of changes of composting process parameters including pH, temperature and organic matter (OM) content on distribution of heavy metal speciation in composted sludge. The sequential extraction procedure developed by Tessier et al. was used in sludge compost to determine the heavy metal speciation. Results showed that, during composting, (1) the contents of the residue fraction for Pb, Zn and Cd were decreased but those for Ni and Cr were increased; the Cu residue fraction was almost constant; (2) the contents of the total mobile fractions (including fractions 1-4) for Zn and Pb were significantly increased, but the increase of those for Cu and Ni were not so remarkable; (3) there were significant degrees of correlation between heavy metal fractions and changes of some selected parameters (for example, pH, composting temperature, and OM content). Only the content of the total mobile fractions for Cu could be predictable from its total content. For the prediction of the total mobile fractions of Zn, Ni, Cd and Cr, the R(2) value was significantly increased by the inclusion of other variables such as pH, temperature and OM content.