Crystallization and Mechanical Properties of Recycled Poly(ethylene terephthalate) Toughened by Styrene–Ethylene/Butylenes–Styrene Elastomer

Recycled poly(ethylene terephthalate) (R-PET) was blended with 15–30 wt% of styrene–ethylene/butylenes–styrene (SEBS) block copolymer and maleic anhydride grafted SEBS (SEBS-g-MA). Effects of nucleation and toughening of the elastomers were evaluated systematically by study of morphology, crystallization, thermal and mechanical properties of the blend. The addition of 30 wt% SEBS promoted the formation of co-continuous structure of the blend and caused the fracture mechanism to change from strain softening to strain hardening. Addition of SEBS-g-MA resulted in significant modification of phase morphology and obviously improved the impact strength. The compatibilization reaction of PET with SEBS-g-MA accelerated the crystallization of PET and increased the crystallinity. The shifts in glass transition temperature of PET towards that of SEBS-g-MA and the higher modulus for R-PET/SEBS-g-MA (70/30) blend found by DMA are also indications of better interactions under the conditions of compatibilization and interpenetrating structure.     

Application of response surface methodology to the treatment landfill leachate in a three-dimensional electrochemical reactor

The influence of different variables on the removal of ammonia nitrogen and COD from landfill leachate was investigated in a three-dimensional electrochemical reactor. Box–Behnken statistical experiment design and the response surface methodology were used to investigate operating condition effects, such as current density, activated carbon to water ratio and the reaction time, on ammonia nitrogen removal efficiency and COD removal efficiency. The positive and negative effects of variables and the interaction between variables on ammonia nitrogen removal and COD removal were determined. The response surface methodology models were derived based on the results and the response surface plots were developed accordingly.     

Kinetic studies on the adsorption of phenol, 4-chlorophenol,and 2,4-dichlorophenol from water using activated carbons

This study uses rate parameters in pseudo-first-order (PFO) and pseudo-second-order (PSO) equations (k₁ and k₂q_e, respectively) to judge the extent for approaching equilibrium in an adsorption process. Out of fifty-six systems collected from the literature, the adsorption processes with a k₂q_e value between 0.1 and 0.8 min^?1 account for as much as 70% of the total. These are classified as fast processes. This work compares the validity of PFO and PSO equations for the adsorption of phenol, 4-chlorophenol (4-CP), and 2,4-dichlorophenol (2,4-DCP) on activated carbons prepared from pistachio shells at different NaOH/char ratios. The activated carbons, recognized as microporous materials, had a surface area ranging from 939 to 1936 m²/g. Findings show that the adsorption of phenol, 4-CP, and 2,4-DCP on activated carbons had a k₂q_e value of 0.15–0.58 min^?1, reflecting the fast process. Evaluating the operating time by rate parameters revealed that k₂q_e was 1.6–1.8 times larger than k₁. These findings demonstrate the significance of using an appropriate kinetic equation for adsorption process design.     

Sublethal impact of paraquat on the life span and parasitic behavior of Diaeretiella rapae M’Intosh

This study focuses on assessing the impact of sublethal doses of paraquat on the survival, the emergence, the life span and the parasitic behavior of Diaeretiella rapae M’Intosh (Hymenoptera: Braconidae). The impact of sublethal doses was measured at room temperature using different densities of the cabbage aphid Brevicoryne brassicae. The results reveal that the field dose of paraquat caused 100% mortality in D. rapae. The percentage emergence of D. rapae decreased from 80.5% in the control group to 71.5% when treated with the lowest concentration of paraquat. Similarly, the life span of parasitoids that emerged from the mummy treated with paraquat also decreased significantly. Oviposition capability and ovipositor thrusting frequency of D. rapae also treated with sublethal dose paraquat decreased significantly along with a shortened patch residence time in the foraging area.     

Aquatic photolysis of hydroxylated polybromodiphenyl ethers under direct UV irradiation: a case study of 2′-HO-BDE-68

Environmental Science and Pollution Research - Hydroxylated polyhalodiphenyl ethers (HO-PXDEs) have attracted considerable scientific interest as examples of emerging aquatic pollutants. However, a...     

Simple model for estimating dry deposition velocity of ozone and its destruction in a polluted nocturnal boundary layer

Determining the destructions of both ozone and odd oxygen, O_x, in the nocturnal boundary layer (NBL) is important to evaluate the regional ozone budget and overnight ozone accumulation. This work develops a simple method to determine the dry deposition velocity of ozone and its destruction at a polluted nocturnal boundary layer. The destruction of O_x can also be determined simultaneously. The method is based on O₃ and NO₂ profiles and their surface measurements. Linkages between the dry deposition velocities of O₃ and NO₂ and between the dry deposition loss of O_x and its chemical loss are constructed and used. Field measurements are made at an agricultural site to demonstrate the application of the model. The model estimated nocturnal O₃ dry deposition velocities from 0.13 to 0.19 cm s^?1, very close to those previously obtained for similar land types. Additionally, dry deposition and chemical reactions account for 60 and 40% of the overall nocturnal ozone loss, respectively; ozone dry deposition accounts for 50% of the overall nocturnal loss of O_x, dry deposition of NO₂ accounts for another 20%, and chemical reactions account for the remaining 30%. The proposed method enables the use of measurements made in typical ozone field studies to evaluate various nocturnal destructions of O₃ and O_x in a polluted environment.     

Process,Characterization and Biodegradability of Aliphatic Aromatic Polyester/Sisal Fiber Composites

The biodegradability, morphology, and mechanical properties of composite materials made of Poly(butylene adipate-co-terephthalate) (PBAT) and sisal fiber (SF) were evaluated. Composites containing acrylic acid-grafted PBAT (PBAT-g-AA/SF) exhibited noticeably superior mechanical properties due to greater compatibility between the two components. The dispersion of SF in the PBAT-g-AA matrix was highly homogeneous as a result of ester formation between the carboxyl groups of PBAT-g-AA and hydroxyl groups in SF and the consequent creation of branched and cross-linked macromolecules. Each composite was subjected to biodegradation tests in Rhizopus oryzae compost. Morphological observations indicated severe disruption of film structure after 60 days of incubation, and both the PBAT and the PBAT-g-AA/SF composite films were eventually completely degraded. Water resistance of PBAT-g-AA/SF was higher than that of PBAT/SF, although weight loss of composites buried in Rhizopus oryzae compost indicated that both were biodegradable, even at high levels of SF substitution. The PBAT-g-AA/SF films were more biodegradable than those made of PBAT, implying a strong connection between these characteristics and biodegradability.     

改性脲醛树脂絮凝浮选剂在污水处理中的应用

用尿素和甲醛作为主要原料合成脲醛树脂季胺盐和脲醛树脂叔胺盐。采用ＷＥＭＣＯ浮选模型机和自行设计的模拟现场充气浮选的气浮设备及现场污水对絮凝浮选剂除油、除悬浮物的性能进行了评价。另外，用核磁共振和红外光谱测定了脲醛树脂叔胺盐的结构，并用凝胶色谱法测定了其分子量。     

江苏省近40年洪涝灾害概况及防洪对策

本文分析了江苏省４０ａ来洪涝灾害概况及１９９１年特大洪涝受灾情况。针对江苏实际，提出了减灾对策。     

OPTIMAL IDENTIFICATION OF MUSKINGUM ROUTING COEFFICIENTS1

Traditionally, identification of the Muskingum routing coefficients has been based on observations of the linearity of a loop formed by graphically plotting a forward and a reverse path. This graphical procedure is time-consuming and may not minimize the error of estimation. A procedure was developed to improve the drawbacks of the graphical method. This procedure calls for (a) the use of least square regression on the forward and reverse paths to determine their respective slopes, and (b) the use of statistical t-test to evaluate the hypothesis that these two slopes are equal. The computational procedure is repeated, using incremental values of the flow weighting coefficient, x. A graph of the computed t-value versus x can be constructed. The optimal value of x, as read from the graph, occurs at the minimum computed t-value. The procedure has been demonstrated superior to the graphical method for three illustrative examples, resulting in a reduction of the error squares by factors ranging from 5 to 6.