Characteristics of bricks made from waste steel slag

The characteristics of bricks made from steel slag were investigated in this research. Slag addition was shown to reduce the required firing temperature. When the firing temperature was greater than 1050 degrees C and the slag addition less than 10%, the bricks met ROC national standard CNS 3319 third-class brick for builders. The percentage of slag increased as the quartz and kaolin decreased in the sintered samples while the magnesium aluminum silicate and calcium silicate increased. There were no new crystal phases observed in these samples.     

Interactions of chlorpyrifos with colloidal materials in aqueous systems

An understanding of sorptive processes is key to describing the fate of chlorpyrifos [O,O-diethyl-O-(3, 5, 6-trichloro-2-pyridyl) phosphorothioate] in aquatic environments. The objectives of this study were to evaluate isotherms for adsorption and desorption of chlorpyrifos on colloidal materials and to advance understanding of interaction mechanisms between chlorpyrifos and colloidal materials. Six Ca-saturated reference smectites, one Ca-saturated humic acid (Ca-humate), and one suspended sediment sample, collected from the Upper Cedar River, Iowa, were studied. A batch equilibration technique was employed to quantify adsorption and desorption isotherms for chlorpyrifos over the 0 to 100 microg L(-1) concentration range in a 0.01 M CaCl(2) background. Large differences in sorption affinity and variation in desorption hysteresis were found among the smectites. Neither chlorpyrifos adsorption nor its desorption were correlated with cation exchange capacity, surface area, or surface charge density of the smectites. The evidence suggests that physical interaction between chlorpyrifos and smectites is the dominant mechanism for adsorption of chlorpyrifos in aqueous systems. Chlorpyrifos was very strongly sorbed on Ca-humate and was not desorbed from the Ca-humate back into the aqueous solution. Chlorpyrifos was moderately sorbed on river sediment, and a large adsorption-desorption hysteresis was also found. The study implies that the nature of both organic and inorganic materials in suspended sediment can influence the adsorption-desorption behavior of chlorpyrifos in aqueous systems.     

Picloram and napropamide sorption as affected by polymer addition and salt concentration

Polymer application to soil is a growing practice to improve soil physical properties and reduce soil erosion. Polymer addition can potentially influence herbicide and pesticide sorption in soil. The one-point distribution coefficient Kd values of two herbicides in the absence and presence of each of 10 polymers (7 polyacrylamides and 3 polysaccharides) were determined by the batch equilibrium method. The results showed that nonionic napropamide [2-(alpha-naphthoxy)-N,N-diethyl propionamide] sorption was essentially unaffected by the presence of any of the polymers. The influence of polymers on anionic picloram (4-amino-3,5,6-trichloropicolinic acid) sorption depends on the charge characteristics of polymers and salt concentrations in the solution. Electrostatic interaction and competition for sorption sites are two primary underlying mechanisms for the polymer influence. At low salt concentration, the increased picloram sorption in the presence of both cationic and anionic polymers was attributed to different electrostatic interactions and polymer partitioning between soil and solution phases. At high salt levels, the presence of polymers had either no influence or a slightly negative influence on the picloram sorption, which was attributed to competition for sorption sites. In field conditions, it is more likely that polymers have no or a slightly negative influence on herbicide sorption due to the presence of salts.     

Hydroxyl radical scavenging role of chloride and bicarbonate ions in the H2O2/UV process

Simultaneous effect of inorganic anions, such as chloride and bicarbonate ions, on the scavenging of hydroxyl radicals (HO*) in the H2O2/UV process is the focus of this paper. The model compound of n-chlorobutane (BuCl) was used as the probe of HO*. By changing the pH conditions (2-9) and the concentrations of NaCl (0.25-2500 mM) and NaHCO3 (25 mM), the variation of HO* concentrations and the rate of H2O2 decomposition were compared. In general, the BuCl and H2O2 follow closely the first-order reaction within the first 10 and 40 min, respectively. In the presence of chloride alone at the pH range of 2-6, the HO* concentration in the reaction mixture increases with the increase of pH, and the HO* concentration at pH = 6 is 100 times of that at pH = 2. Including bicarbonate species in the solution, the peak HO* concentration was found at a certain pH, which shifts from 4, 5, to 5-7, as the molar ratios of chloride/bicarbonate species increase from 1 to 100. In addition, without bicarbonate species HO* concentration decreases significantly with increasing chloride concentration but remained rather unchanged beyond 1250 mM. In contrast, the HO* scavenging in the presence of bicarbonate species became relatively significant only when the chloride concentration reached beyond 250 mM. Throughout all experiments of different water quality conditions, the H2O2 decomposition rate remains rather unchanged.     

Effects of sample storage on biosolids compost stability and maturity evaluation

Compost stability and maturity are important parameters of compost quality. To date, nearly all compost characterization has been performed using samples freshly collected because sample storage can affect compost stability and maturity evaluation. However, sample preservation is sometimes necessary, especially for scientific research purposes. There is little information available on the effects of sample storage on compost stability and maturity. Samples of biosolids compost with different levels of stability and maturity were collected from four compost facilities in Florida (referred to as Register, Winslow, Sunset, and Meadow). Comparisons of CO2 evolution, seed germination rate, and water-soluble organic carbon (WSOC) were made between fresh samples with short storage at 4 degrees C for less than 1 wk and air-dried or frozen compost samples stored for 1 yr. The effects of storage (air-dry or frozen) on the measured parameters depended on compost stability and maturity and on the compost material source. Frozen storage reduced the peak CO2 evolution of Register samples by 12 to 29%, while accumulated CO2 evolution was reduced by 43 to 64% and 110 to 277% with air-dry and frozen storage, respectively. The storage effect on CO2 evolution with more stable compost was inconsistent. Storage did not affect compost phytotoxicity, except for samples from the Sunset facility. Air-drying reduced the WSOC by up to 35%, and freezing increased it by up to 34%, while both storage methods had no significant effect on samples of low WSOC. Despite all these variations, WSOC had a significant and consistent relation to CO2 evolution and seed germination rates with R2 of 0.78 and 0.57, respectively, regardless of storage methods.     

Simulation of cooling-water discharges from power plants

Accurate simulation of the temperature distribution in a cooling lake or reservoir is often required for feasibility studies of engineering options that increase the cooling capacity of the waterbody. A three-dimensional hydrodynamic and temperature model has been developed and applied to several cooling lakes in the south-eastern United States. In this paper, the details of the modeling system are presented, along with the application to the Flint Creek Lake.     

The enhancement methods for the degradation of TCE by zero-valent metals

Batch tests were performed to compare the degradation rates of TCE on Fe0 and Zn0. Our results indicated that the degradating capability of Zn0 to TCE was nearly 10 times higher than that of Fe0. On the other hand, the degradation rates of Fe0 or Zn0 in conjunction with other metals for reduction of TCE was investigated. The selected metals were nickel (Ni0) and palladium (Pd0) both of which have a strong enhancement effect. The reduction rates of Zn0/Pd0 and Zn0/Ni0 for TCE were the fastest. Fe0 that had lost its surface activity could be activated again by the addition of Pd0 or Ni0.     

钻井环境污染源头控制技术综述

通过对国内外石油行业的钻井环境污染源头控制技术的简单综述,分析了钻井工艺可采用小孔径钻井、连续软管工艺、新型固控设施等的技术特点,对选择合适的钻井液以及应用环保型钻井液来减轻污染方面进行了探讨。并展望了我国石油行业钻井环境污染源头控制技术的发展。     

广州市地面塌陷的形成原因与时空分布

地面塌陷是珠江三角洲城市地质灾害的主要类型之一。广州市地面塌陷灾害频繁发生,近10年来呈波动式上升趋势。其塌陷类型分为岩溶塌陷和工程地面塌陷两种,岩溶塌陷主要分布在广花盆地的花都区、白云区,工程地面塌陷主要分布在中心城区。地面塌陷灾害孕灾环境复杂、致灾因子多样,承灾体脆弱,灾害后果严重。人为因素是地面塌陷的主要诱发因素。岩溶塌陷主要是由于过量抽取地下水或矿山疏干排水、地下采空、暴雨触发所致;工程塌陷主要是人类工程行为所致,其主要致灾因子包括排水疏干与突水(突泥)作用、人工加载、人工振动、人工开挖桩基、地表渗水、地铁等地下工程盾构掘进等。     

首都大学生的自然灾害认知调查与减灾教育建议

2006年国际减灾日的主题是"减灾始于学校",了解学生的灾害认知水平有助于减灾教育工作的有效开展。以北京5所高校的大学生为调查对象,通过问卷方式调查大学生对自然灾害的关注程度、防灾意识、灾害理论知识、应急行为知识以及对减灾教育的看法。问卷统计结果表明:大学生总体的灾害认知水平较低,现行减灾教育方式和内容与学生的期望有较大偏差。在此基础上,提出了减灾教育内容要将学生"该知道的"与"想知道的"相结合,通过演练演习等方式提高学生的防灾应急实际技能等减灾教育建议。