清洁发展机制在石油行业的潜力分析

系统分析了石油行业清洁发展机制项目的潜力,并提出了建议。在统计与石油行业相关的清洁发展机制方法学及其注册项目和温室气体减排量的基础上,给出了各方法学与石油行业的相关性。从勘探与生产、天然气与管道、炼油与化工三大领域,分析了石油行业潜在的清洁发展机制项目领域。最后,提出了对石油行业开展清洁发展机制相关工作的建议。     

能源利用中烃类气体检测技术研究进展

烃类气体作为地表油气地球化学勘查地下油气藏的直接指标,以及钻井液检测中指导钻井作业的重要因素,在挥发性烃类污染控制中也发挥着重要作用。通过对各类烃类气体检测技术现状和应用情况进行分析与整理,为该类技术针对不同目标的选择与组合提供了依据。     

油田作业废水高效处理技术中试研究

文章根据新疆油田作业废水特征及油田地处干旱区的地理特点,结合国内外含聚合物污水处理的技术现状,以及油田连续生产稳定运行的要求,在含油污水处理技术的基础上,开展了作业废水处理关键技术研究和工艺优化,采用了"隔油—絮凝气浮—深层过滤"技术。中试试验结果表明:处理后废水COD_(Cr)、石油类、SS可分别由680 mg/L、98.6 mg/L、56.2 mg/L降至98.8 mg/L、5.4 mg/L、4.5 mg/L,去除率分别为85.5%、94.5%、92.0%。     

稠油火驱开采技术节能减排效果分析

火驱作为稠油热采的有效接替技术,与注蒸汽开采技术相比,具有采收率高,能耗低,CO_2排放少的优势。文章从火驱驱油机理特征阐述了火驱与注蒸汽技术的不同点,从燃料开采能耗、热效率、注入剂资源、数据对比四个方面分析火驱比注蒸汽热效率高,无燃料开采成本,能耗是注蒸汽的50%;从CO_2气体排放方式和排放量对比可知,火驱能够减少温室气体排放,为油田节能减排、环保生产起到积极作用。     

层燃螺旋炉排焚烧技术处理含油污泥研究

通过对几种含油污泥无害化处理技术的比选,分析不同处理技术物耗、能耗情况,优选出经济有效的含油污泥焚烧技术,结合新疆油田含油污泥的特点,采用层燃螺旋炉排焚烧技术,利用其燃烧热能生产蒸汽用于原油生产,采用余热吸收急冷与碱液半干法除酸技术,有效控制了二次污染;采用布袋除尘与烟尘固化技术确保了烟气达标排放。年节省成本支出3095.88万元。     

石油污染土壤原位生物修复的强化实验研究

为研究添加营养物质和高效降解石油微生物对油污土壤生物修复的作用,通过分层土柱的方法,连续监测了不同条件下不同土层的含水率、石油烃含量、细菌数量及脱氢酶活性。结果表明:添加营养物质同时接种高效微生物可使降解效果明显改善,降解率比在自然条件下提高近50%,而单纯添加营养物质不接种高效微生物可使降解率比在自然条件下提高约25%。降解初期,上层土壤降解效果较好,而到中后期,中下层降解效果好于上层。微生物数量和脱氢酶活性与石油降解率之间存在良好的相关性,脱氢酶活性比微生物数量更能反映修复过程中微生物的存活状态。添加营养物质和高效降解石油微生物对油污土壤原位生物修复具有强化作用。     

Numerical simulation on multi-scale diffusion of CO2 injected in the deep ocean in a practical scenario

The direct injection of CO₂ into the deep ocean is one of the ways for the mitigation of the global warming. There is, however, a concern about its environmental impact near the injection point. To minimize its biological impact, it is necessary to make CO₂ disperse as fast as possible and it is thought that injection with pipes towed by moving-ships is effective for this purpose. Because the injection ships are planned to move in the site, the order of magnitude of which is 10² km, a mesoscale model is required to predict CO₂ fate in seawater. At the same time, it is required to predict the concentration precisely near the injection points, which move with the ships in the mesoscale domain. In this study, a multi-scale ocean model was developed to analyze the dispersion of CO₂ in the deep ocean: the model consists of a fixed mesoscale domain and 5 small-scale domains nesting in the mesoscale domain. Each small-scale domain involves 6 pipes and moves along with the trajectories of the injection ships. From the results of the present numerical simulation, the developed technique demonstrated its applicability as a tool to optimise the system to dilute CO₂ below some criterion of biological impact.     

CCS scenarios optimization by spatial multi-criteria analysis: Application to multiple source sink matching in Hebei province

A method, based on spatial analysis of the different criteria to be taken into consideration for building scenarios of CO₂ capture and storage (CCS), has been developed and applied to real case studies in the Hebei province. Totally 88 point sources (42 from power sector, 9 from iron and steel, 18 from cement, 16 from ammonia, and 3 from oil refinery) are estimated and their total emission amounts to 231.7 MtCO₂/year with power, iron and steel, cement, ammonia and oil refinery sharing 59.13%, 25.03%, 11.44%, 3.5%, and 0.91%, respectively. Storage opportunities can be found in Hebei province, characterised by a strong tectonic subsidence during the Tertiary, with several kilometres of accumulated clastic sediments. Carbon storage potential for 25 hydrocarbon fields selected from the Huabei complex is estimated as 215 MtCO₂ with optimistic assumption that all recovered hydrocarbon could be replaced by an equivalent volume of CO₂ at reservoir conditions. Storage potential for aquifers in the Miocene Guantao formation is estimated as 747 MtCO₂ if closed aquifer assumed or 371 MtCO₂ if open aquifer and single highly permeable horizon assumed. Due to poor knowledge on deep hydrogeology and to pressure increase in aquifer, injecting very high rates requested by the major CO₂ sources (>10 MtCO₂/year) is the main challenge, therefore piezometry and discharge must be carefully controlled. A source sink matching model using ArcGIS software is designed to find the least-cost pathway and to estimate transport route and cost accounting for the additional costs of pipeline construction due to landform and land use. Source sink matching results show that only 15–25% of the emissions estimated for the 88 sources can be sequestrated into the hydrocarbon fields and the aquifers if assuming sinks should be able to accommodate at least 15 years of the emissions of a given source.     

Immobilization of non-point phosphorus using stabilized magnetite nanoparticles with enhanced transportability and reactivity in soils

Laboratory batch and column experiments were conducted to investigate the immobilization of phosphorus (P) in soils using synthetic magnetite nanoparticles stabilized with sodium carboxymethyl cellulose (CMC-NP). Although CMC-stabilized magnetite particles were at the nanoscale, phosphorus removal by the nanoparticles was less than that of microparticles (MP) without the stabilizer due to the reduced P reactivity caused by the coating. The P reactivity of CMC-NP was effectively recovered when cellulase was added to degrade the coating. For subsurface non-point P pollution control for a water pond, it is possible to inject CMC-NP to form an enclosed protection wall in the surrounding soils. Non-stabilized “nanomagnetite” could not pass through the soil column under gravity because it quickly agglomerated into microparticles. The immobilized P was 30% in the control soil column, 33% when treated by non-stabilized MP, 45% when treated by CMC-NP, and 73% when treated by both CMC-NP and cellulase.     

Determination of antibiotics in sewage from hospitals, nursery and slaughter house, wastewater treatment plant and source water in Chongqing region of Three Gorge Reservoir in China

Sewage samples from 4 hospitals, 1 nursery, 1 slaughter house, 1 wastewater treatment plant and 5 source water samples of Chongqing region of Three Gorge Reservoir were analyzed for macrolide, lincosamide, trimethoprim, fluorouinolone, sulfonamide and tetracycline antibiotics by online solid-phase extraction and liquid chromatography-tandem mass spectrometry. Results showed that the concentration of ofloxacin (OFX) in hospital was the highest among all water environments ranged from 1.660 μg/L to 4.240 μg/L and norfloxacin (NOR, 0.136-1.620 μg/L), ciproflaxacin (CIP, ranged from 0.011 μg/L to 0.136 μg/L), trimethoprim (TMP, 0.061-0.174 μg/L) were commonly detected. Removal range of antibiotics in the wastewater treatment plant was 18-100% and the removal ratio of tylosin, oxytetracycline and tetracycline were 100%. Relatively higher removal efficiencies were observed for tylosin (TYL), oxytetracycline (OXY) and tetracycline (TET)(100%), while lower removal efficiencies were observed for Trimethoprim (TMP, 1%), Epi-iso-chlorotetracycline (EICIC, 18%) and Erythromycin-H₂O (ERY-H₂O, 24%). Antibiotics were removed more efficiently in primary treatment compared with those in secondary treatment.