钻头套缺口的冲裁加工

对钻头套缺口的冲裁加工进行可行性分析 ,优化设计冲模 ,并对其进行强化热处理 ,提高冲模使用寿命。     

我国主要水系(清洁河段)河水溶氧水平及影响因素

应用我国水文年鉴上５０年代末至９０年代初期大量的实测数据，研究我国主要水系清洁河段河水溶氧水平与温度，纬度，海拔高度，泥沙含量和离子强度等因素的关系。     

Kinetic analysis of anaerobic phosphorus release during biological phosphorus removal process

Enhanced biological phosphorus removal (EBPR) is a commonly used and sustainable method for phosphorus removal from wastewater. Poly-β-hydroxybutyrate (PHB), polyphosphate, and glycogen are three kinds of intracellular storage polymers in phosphorus accumulation organisms. The variation of these polymers under different conditions has an apparent influence on anaerobic phosphorus release, which is very important for controlling the performance of EBPR. To obtain the mechanism and kinetic character of anaerobic phosphorus release, a series of batch experiments were performed using the excessively aerated sludge from the aerobic unit of the biological phosphorus removal system in this study. The results showed that the volatile suspended solid (VSS) had an increasing trend, while the mixed liquid suspended sludge (MLSS) and ashes were reduced during the anaerobic phosphorus release process. The interruption of anaerobic HAc-uptake and phosphorus-release occurs when the glycogen in the phosphorus-accumulating-organisms is exhausted. Under the condition of lower initial HAc-COD, HAc became the limiting factor after some time for anaerobic HAc uptake. Under the condition of higher initial HAc-COD, HAc uptake was stopped because of the depletion of glycogen in the microorganisms. The mean ratio of Δρ _P/Δρ _PHB, Δρ _GLY/Δρ _PHB, Δρ _P/ΔCOD, was 0.48, 0.50, 0.44, and 0.92, respectively, which was nearly the same as the theoretical value. The calibrated kinetic parameters of the HAc-uptake and phosphorus-release model were evaluated as follows: Q _HAc,max was 164 mg/(g · h), Q _P,max was 69.9 mg/(g · h), K _gly was 0.005, and KCOD was 3 mg/L. An apparently linear correlation was observed between the ratio of Δρ _P/ΔCOD and pH of the solution, and the equation between them was obtained in this study. Translated from Acta Scientiae Circumstantiae, 2005, 25(9), 1164–1169 [译自: 环境科学学报]     

挤压变形对MB15镁合金及组织性能的影响

对MB15镁合金进行热处理,然后进行挤压试验,挤压变形MB15镁合金组织以剪切条纹和细小的α再结晶等轴晶为基本特征。挤压变形可显著地细化镁合金晶粒并提高镁合金的力学性能。随挤压比的增大,晶粒细化程度增加;强度、硬度随挤压比的增大而增大。所制定的工艺合理,挤压出的管材、型材有较好的力学性能。     

云南省环境信息网络平台构架

分析了云南省环境信息网络平台建设现状和存在问题,按照"一个轴心、三个层次、内外有别、三网并进"的思路对云南省环境信息网络平台进行了构建.     

高技术产业污染

通过对美、日两国高技术产业污染现状的分析，得出了高技术生产并非清洁的结论，分析了我国高技术污染的现状和其潜在的危害，提出了防止高技术污染的措施。     

包气带中残油动态释放实验研究

通过对下水油类浓度、水位、降雨量及色质联机分析，确定了包气带中残油为水源地主要污染源之一，利用动态释放试验。模拟了河滩包气油污土层中残油动态释放过程，探讨了不同水深及间歇进地油类释放的影响并确定残油的污染能力。     

人居环境的噪声与振动控制途径和对策

本文从“以人为本”改善人居环境的质量水平的角度，分析可能影响人居环境的主要噪声与振动因素，提出了人居环境的噪声与振动控制途径和对策。在环境保护、建筑规划、建筑设计、产品制造和加强管理等各环节，提出了一系列新观点。为规划师、建筑师、环保工作者及各方面有关人员提供了解决人居环境中噪声与振动问题的参考意见。     

湿空气作为自由基源物质脱除烟气中的NOx

以湿空气为自由基源物质,通过直流电晕放电自由基簇射,结合化学吸收脱除烟气中的NOx,比较了湿空气和湿氧气两种自由基源物质条件下的NOx脱除效果.结果表明,以湿空气为自由基源物质时的NOx脱除效率比湿氧气低.实验条件下,湿空气时,反应器NOx脱除效率为45.5%,经25%NaOH溶液吸收后系统总效率为68.6%;湿氧气时,反应器NOx脱除效率为71.5%,经25%NaOH溶液吸收后系统总效率为90.9%.     

江苏灌河口海域现代沉积特征研究

本文对2003年7月所采集的灌河口外179个沉积物样品(其中岸滩为61个,近岸浅海为118个),应用激光粒度仪进行了粒度分析,获得了粒径分布数据和矩法参数,据此将该海域沉积物划分为5种类型,其中主要为粉砂质砂和砂质粉砂;沉积物在河口附近的分布大体以灌河口主航道为中心,具有对称性特征;沙嘴附近的沉积物组成较为复杂,来源较多,表明其形成是波浪、潮流、沿岸流以及径流综合作用的结果。