Zinc tolerance and accumulation in Pteris vittata L. and its potential for phytoremediation of Zn- and As-contaminated soil

A field investigation and pot experiments were conducted to determine the potential of arsenic (As) hyperaccumulator, Pteris vittata L., to remediate sites co-contaminated with zinc (Zn) and As. We found that P. vittata L. had a very high tolerance to Zn and grew normally at sites with high Zn concentrations. In addition, P. vittata L. could effectively take up Zn into its fronds, with a maximum of 737 mg kg(-1) under field conditions. In pot experiments, the accumulated Zn concentration increased significantly as the Zn treatment was raised from 0 to 2000 mg kg(-1), with a maximum Zn accumulation of 0.22 mg pot(-1). Although the concentration of As in P. vittata L. was reduced by the addition of Zn, total frond accumulation of As was elevated when the Zn treatment was increased from 0 to 1000 mg kg(-1), with a maximum As accumulation of 8.3 mg pot(-1) in the presence of 1000 mg kg(-1) Zn. The high Zn tolerance, relatively high ability to accumulate Zn, and great capacity to accumulate As under conditions of suppression by high Zn suggest that P. vittata L. could be useful for the remediation of sites co-contaminated with Zn and As.     

Toxicity of copper on rice growth and accumulation of copper in rice grain in copper contaminated soil

Pot soil experiments showed that copper (Cu) is highly toxic to rice. Rice grain yields decreased exponentially and significantly with the increase of soil Cu levels. Rice grain yield was reduced about 10% by soil Cu level of 100 mg kg(-1), about 50% by soil Cu level of 300-500 mg kg(-1) and about 90% by soil Cu concentration of 1,000 mg kg(-1). Root was more sensitive to soil Cu toxicity than other parts of rice plant at relatively lower soil Cu levels (less than 300-500 mg kg(-1)), but the growth of whole rice plant was severely inhibited at high soil Cu levels (300-500 mg kg(-1) or above). Cu concentrations in rice grain increased with soil Cu levels below 150-200 mg kg(-1), but decreased with soil Cu levels above 150-200 mg kg(-1), with peak Cu concentration at soil Cu level of 150-20 mg kg(-1). Cu was not distributed evenly in different parts of rice grain. Cu concentration in cortex (embryo) was more than 2-fold that in chaff and polished rice. More than 60% of the Cu in grain was accumulated in polished rice, about 24% in cortex (embryo), and about 12% in chaff. So, about 1/3 of the Cu in rice grain was eliminated after grain processing (chaff, cortex and embryo was removed).     

Chemical characterization of fine particles from on-road vehicles in the Wutong tunnel in Shenzhen, China

Vehicle populations in China have been increasing sharply since 1990s. Vehicle emissions including various gaseous pollutants and particulate matter cause deterioration of air quality. However, measurements of particulate mater from on-road vehicles in China are scarcely reported, and thus the chemical compositions of particles emitted from vehicles in China are unknown. In this research, tunnel experiments were performed to measure PM2.5 in the Wutong tunnel, Shenzhen, China. Detailed PM2.5 chemical compositions, with organic compounds determined by GC/MS, in the tunnel were presented. Elemental carbon and organic matter composed 63% and 34% of the total PM2.5 mass in the Wutong tunnel, respectively. Alkanes, PAHs, hopanes, fatty acids, and dicarboxylic acids were the major identified organic compounds, and their source profiles in the PM2.5 in the Wutong tunnel were characterized. The comparisons of our measurements with those in the literature were also made to demonstrate the characteristics of the vehicle source profiles in the Wutong tunnel. The experimental results in this paper can improve understanding of particulate matter emitted from vehicles in China.     

Response of microbial activities to heavy metals in a neutral loamy soil treated with biosolid

Application of biosolid on land has been widespread in numerous countries for last several decades. This study performed incubation experiments by mixing a neutral loamy soil and biosolid enriched in Cu, Pb and Zn to explore how heavy metal affects soil mineralization and microbial biomass. The experimental results indicated that large nutrient, microorganism and C sources from biosolid were beneficial to microbial respiration. However, compared to the biosolid alone treatment, the supplemented Cu, Pb and Zn in biosolid reduced the mineralized C by roughly 36%. This phenomenon was probably caused by a portion of the Cu, Pb and Zn being complexed with organic matter to prevent decomposition of organic carbon by microorganisms. Equally, soil treated with biosolid increased the quantity of mineralized N by approximately five-fold and accelerated the rate of N mineralization by about one-fold compared to untreated soil. Notably, addition of heavy metals impaired the mineralization process, particularly when Pb reached about 64%. The reduced N mineralization occurred for similar reasons to the microbial respiration. The addition of biosolid in soil considerably increased the amount of mineralizable N; however, the increase was lower in biosolid-treated soil spiked by heavy metals. The addition of heavy metals in the soil-biosolid mixture clearly reduced the microbial biomasses C (MBC) and N (MBN), indicating that the microbial activities had been disrupted by the heavy metals. The microbial biomass C/N ratio had changed initially from 8 to 13 at the end of incubation period, owing to various groups of microbes expressing different mechanisms of metabolism, indicating that the microbial population had changed from bacteria to fungi, which had higher metal tolerance.     

Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

Modeling solute transport in one-dimensional homogeneous and heterogeneous soil columns with continuous time random walk

In this paper, we used the continuous time random walk (CTRW) framework to characterize the transport process in 1250-cm long one-dimensional homogenous and heterogeneous soil columns at the experiments conducted by Huang et al. [Huang, K., Toride, N., van Genuchten, M.Th., 1995. Experimental investigation of solute transport in large, homogeneous and heterogeneous, saturated soil columns. Trans. Porous Media. 18, 283-302]. The transport process was also simulated by using the advection-dispersion equation (ADE) and the spatial fractional advection-dispersion equation (FADE) for comparison. In the homogeneous soil column, the non-Fickian behavior is found at the distances less than 1000cm with beta values larger than 1.60, but less than 2, and Fickian form transport is obtained at distances larger than 1000cm with beta values larger than 2. In the heterogeneous soil column, we found the most anomalous behavior at distances from 200cm to 700cm with beta values ranging from 0.894 to 0.958, and non-Fickian transport process is observed at distances larger than 800cm with beta values in the range between 1 and 1.3. More significant non-Fickian behavior is found for transport in the heterogeneous soil column than that in the homogeneous soil column. The CTRW fits to the breakthrough curves (BTCs) have lower values of root mean square error (RMSE) and higher values of determination coefficient (r(2)), with respect to the fits of ADE and FADE. The CTRW model also is better captures the full evolution of BTCs, and especially their tails.     

Enhanced photocatalysis of pentachlorophenol by metal-modified titanium (IV) oxide

The effects of four metals (Ag, Au, Pt, and Cu) doped on TiO2 on the photocatalysis of pentachlorophenol (PCP) were investigated. The results of this study indicated that all four metals-doped TiO2 catalysts were able to enhance the efficiency of PCP photocatalysis with an optimum metallic content of 0.1 wt%. For the metal-doped TiO2 samples (Au, Pt, and Cu), the patterns of light absorption were significantly extended toward visible light spectra in the wavelengths between 400 and 800 nm. The photocatalysis of PCP was pH dependent with the maximum degradation rate achieved in the solution at pH 3. The formation of chloride ion corresponded with the concentration of PCP degraded which confirmed that dechlorination was the major pathway of PCP photocatalysis. The overall toxicities of PCP samples were reduced with the extension of light exposure using the microtox test. The results of PCP photocatalysis are also discussed based on the characteristics of metal/TiO2 including X-ray differential (XRD) patterns, Brunquer Emmett Teller (BET) specific area analysis, and Ultra Violet (UV)-Vis absorption spectra.     

Two-stage fuzzy-stochastic robust programming: a hybrid model for regional air quality management

In this study, a hybrid two-stage fuzzy-stochastic robust programming (TFSRP) model is developed and applied to the planning of an air-quality management system. As an extension of existing fuzzy-robust programming and two-stage stochastic programming methods, the TFSRP can explicitly address complexities and uncertainties of the study system without unrealistic simplifications. Uncertain parameters can be expressed as probability density and/or fuzzy membership functions, such that robustness of the optimization efforts can be enhanced. Moreover, economic penalties as corrective measures against any infeasibilities arising from the uncertainties are taken into account. This method can, thus, provide a linkage to predefined policies determined by authorities that have to be respected when a modeling effort is undertaken. In its solution algorithm, the fuzzy decision space can be delimited through specification of the uncertainties using dimensional enlargement of the original fuzzy constraints. The developed model is applied to a case study of regional air quality management. The results indicate that reasonable solutions have been obtained. The solutions can be used for further generating pollution-mitigation alternatives with minimized system costs and for providing a more solid support for sound environmental decisions.     

Abusive supervision and work behaviors: The mediating role of LMX

We investigated the mediating role of the leader–member exchange (LMX) in the association of abusive supervision and employee work behaviors (task performance and organizational citizenship behaviors toward the organization and individuals). Using data collected from 366 supervisor–subordinate dyads, we found that LMX fully mediated the negative effects of abusive supervision on all three work behaviors. In addition, we conducted a supplementary study on the basis of the data collected from 54 supervisor–subordinate dyads from a garment company, and we found that LMX mediated the relationship between abusive supervision and employee objective future performance with interactional justice controlled. Copyright © 2011 John Wiley & Sons, Ltd.     

The many benefits of employee well‐being in organizational research

We undertake three objectives in this Incubator. We begin with a discussion of how well‐being has been considered in organizational research. Second, we provide an overview of the relationship between employee well‐being and such workplace outcomes as job performance, employee retention, and cardiovascular health. Third, we introduce exciting research directions. Copyright © 2012 John Wiley & Sons, Ltd.