Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants

Particulate matter (PM) has been becoming the principal urban pollutant in many major cities in China, and even all over the world. It is reported that the coal combustion process is one of the main sources of PM in the atmosphere. Therefore, an investigation of formation and emission of fine primary PM in coal combustion was conducted. First, the sources and classification of coal-fired primary PM were discussed; then their formation pathways during the coal combustion process were analyzed in detail. Accordingly, the emission control methods for fine particles generated from coal-fired power plants were put forward, and were classified as precombustion control, in-combustion control, and postcombustion control. Precombustion control refers to the processes for improving the coal quality before combustion, such as coal type selection and coal preparation. In-combustion control means to take measures for adjusting the combustion conditions and injection of additives during the combustion process to abate the formation of PM. Postcombustion control is the way that the fine PM are aggregated into larger ones by some agglomeration approaches and subsequently are removed by dust removal devices, or some high-performance modifications of conventional particle emission control devices (PECDs) can be taken for capturing fine particles. Finally, some general management suggestions are given for reducing fine PM emission in coal-fired power plants.

ImplicationsThe analysis and discussions of coal properties and its combustion process are critical to recognizing the formation and emission of the fine primary PM in combustion. The measures of precombustion, in-combustion, and postcombustion control based on the analysis and discussions are favorable for abating the PM emission. Practically, some measures of implementation do need the support of national policies, even needing to sacrifice economy to gain environmental profit, but this is the very time to execute these, and high-performance PECDs, especially novel devices, should be used for removing fine PM in flue gas.     

巢湖入湖河流沉积物中有机磷的形态分级研究简

为识别巢湖流域污染物的特征、来源及其沉积物有机磷各形态分布与富营养化的关系,测定了7条巢湖入湖河流沉积物中有机磷各形态的含量,分析不同污染类型入湖河流沉积物中有机磷各形态分布的差异及与其他因素间的相关性。研究发现,不同污染类型入湖河流沉积物中水土保持控制型河流沉积物中有机磷各组分的相对含量顺序为残渣态P_o >富里酸-P_o >HCl-P_o >胡敏酸-P_o >NaHCO₃-P_o,平均的相对比例为7.5：3.1：1.9：1.5：1.0,而城市污染控制型和面源污染控制型河流沉积物中有机磷各组分的相对含量顺序恰好相同,面源污染控制型河流沉积物P_o各形态含量低于城市污染控制型和水土保持控制型河流。中活性P_o和OM、TP、P_i、P_o、TN、NaHCO₃-P_i、NaOH-P_i呈正相关,非活性P_o与P_o、NaOH-P_i呈显著正相关关系,反映了中活性P_o很容易转化为生物可利用磷和非活性P_o,且非活性P_o仍然具有潜在的生物活性。     

混凝法去除城市生活污水中抗性基因

采用聚合氯化铝(PACl)和聚合硫酸铁(PFS)混凝处理城市生活污水(格栅出水和二级出水),考察混凝剂投加量、p H值对污水中抗生素抗性基因(ARGs)的去除率影响。结果表明,随着PACl和PFS投加量的增加,污水中目标基因的去除率先升高后降低;在p H 3~10的范围内,PACl对目标基因的去除效果随p H值的增加而降低,PFS对目标基因的去除随着p H值的增加先升高后降低。对于格栅出水,PACl和PFS的最佳投加量为400 mg/L,基因的去除率分别达到2.33~2.97 log和0.98~2.11 log,对于二级出水,PACl和PFS的最佳投加量分别为200 mg/L和150 mg/L,基因的去除率分别为1.85~2.64log、1.81~2.46 log;混凝去除最优p H条件分别为p H=3(投加PACl)及p H=5~6(投加PFS)。PACl的处理效果优于PFS。     

Mechanical behavior of typical hazardous waste and its influence on landfill stability during operation

The stability of hazardous waste (HW) landfill is a major security risk to the landfill environmental safety. The mechanical behavior of waste controls many aspects of landfill design and operation, including stability and settlement issues and the integrity of geosynthetic and liner components. This study presents the results of a laboratory experiment to learn the mechanical properties of HW collected from the Hangzhou HW landfill. Measured mechanical behavior was compared with results for municipal solid waste (MSW) to assess their discrepancies. The particle size of HW was analyzed by the sieving and hydrometer methods. Because HW comes primarily from industrial plants in the form of sludge or slag, their particle sizes are generally smaller than those of MSW. This study indicates that the shear strength parameters of HW are more sensitive to the methods of testing and calculation than those of MSW. Numerical simulations demonstrate that the safety factor of a landfill is affected by the mechanical properties of HW, especially cohesion and friction angle. Because of the lower particle size and wider compression ratio, compared to MSW, an HW landfill should be taken more care in its operational procedures so as to increase its stability.     

Food utilization and growth of cutworm Spodoptera litura Fabricius larvae exposed to nickel,and its effect on reproductive potential

Food utilization and growth of the 5th and 6th instar Spodoptera litura Fabricius larvae, and its effect on reproduction potential was evaluated by feeding larvae diets with different doses of Ni for 3 generations. Dose-dependent relationships between Ni levels and food consumption and growth were variable with different larval developmental period and Ni exposure duration. RCR, AD and RGR of the 6th instar larvae were much more affected by Ni exposure than those of 5th instar larvae, and the effects were strongest in the 3rd generation. It was found that RCR was significantly stimulated after 1 and 20 mg kg⁻¹ Ni exposure, while AD was significantly inhibited after 1, 5, 10 and 40 mg kg⁻¹ Ni exposure. However, lower levels of Ni (?5 mg kg⁻¹) significantly increased and higher levels of Ni (?10 mg kg⁻¹) significantly decreased RGR. In 3 successive generations, 10 mg kg⁻¹ Ni significantly increased the ECI and ECD of the 5th instar larvae, and 5 mg kg⁻¹ Ni significantly increased the ECD of the 6th instar larvae. However, ECD were all significantly inhibited with 20 mg kg⁻¹ Ni exposure. Results also revealed that durations of larvae were shortened at low levels of Ni, but extended at high levels of Ni. Fecundity was inhibited by the highest Ni doses in each generation, while improved by low Ni doses in the 3rd generation. Hatching rates in all treatments were significantly decreased in a Ni dose-dependent manner. Study indicated that effects of Ni on these parameters were predominant with the increasing Ni exposure period.     

The early warning of aquatic organophosphorus pesticide contamination by on-line monitoring behavioral changes of Daphnia magna

In this paper, the movement behavior of Daphnia magna was studied as a bio-indicator of organophosphorous pesticide (OP) contamination, using an on-line bio-monitoring method, the Multispecies Freshwater Biomonitor. A static test of acute toxicity test revealed the 24-h and 48-h LC(50) values (95% confidence limit) for Daphnia magna to be respectively 0.45 microg/l and 0.21 microg/l for dipterex 3.80 microg/l and 0.90 microg/l for malathion, and 1.25 microg/l and 0.38 microg/l for parathion. The behavior strength of Daphnia magna was a sensitive indicator of sublethal OP stress and resulted in significant concentration-response relationships for the three OPs. Increasing OP concentration will result in more intensive behavioral responses of Daphnia magna and shorter response time, which could be described by the Stepwise Stress Model (SSM). Therefore movement behavior can be effectively applied in early warning of environment quality by on-line bio-monitoring. The intensive changes in behavior strength of Daphnia magna over a short time follow the SSM concept and can be used as an indicator of early stress response to OP accidental contamination.     

The Avoidance Responses of Daphnia magna to the Exposure of Organophosphorus Pesticides in an On-Line Biomonitoring System

In this study, avoidance behavior of the freshwater cladoceran Daphnia magna Straus was used as indicator to assess the early stress of accidental organophosphorus pesticide (OP) contamination. The movement behavior was detected by a multi-species biomonitoring system. There was obvious concentration–response relationship between the OP stress and the behavioral response even at sublethal exposure. A rising OP stress resulted in a significant decrease of response time to escape (RTE; p<0.05). In comparison of different OPs, it was found that there was a power regression between RTE and the toxic unit of OPs. Therefore, the avoidance behavior of D. magna was a sensitive indicator of sublethal OP stress, and the power relationship could be used to predict the early warning thresholds of more OPs in the on-line biomonitoring system.     

Determination of road dust loadings and chemical characteristics using resuspension

The contribution of fugitive dust from traffic to air pollution can no longer be ignored in China. In order to obtain the road dust loadings and to understand the chemical characteristics of PM₁₀ and PM_2.5 from typical road dust, different paved roads in eight districts of Beijing were selected for dust collection during the four seasons of 2005. Ninety-eight samples from 28 roads were obtained. The samples were resuspended using equipment assembled to simulate the rising process of road dust caused by the wind or wheels in order to obtain the PM₁₀ and PM_2.5 filter samples. The average road dust loading was 3.82 g m^− 2, with the highest of 24.22 g m^− 2 being in Hutongs in the rural–urban continuum during winter. The road dust loadings on higher-grade roads were lower than those on lower-grade roads. Attention should be paid to the pollution in the rural–urban continuum areas. The sums of element abundances measured were 16.17% and 18.50% for PM₁₀ and PM_2.5 in road dust. The average abundances of OC and EC in PM₁₀ and PM_2.5 in road dust were 11.52%, 2.01% and 12.50%, 2.06%, respectively. The abundance of elements, water-soluble ions, and OC, EC in PM₁₀ and PM_2.5 resuspended from road dust did not change greatly with seasons and road types. The soil dust, construction dust, dust emitted from burning coal, vehicle exhaust, and deposition of particles in the air were the main sources of road dust in Beijing. Affected by the application of snow-melting agents in Beijing during winter, the amount of Cl⁻ and Na⁺ was much higher during that time than in the other seasons. This will have a certain influence on roads, bridges, vegetations, and groundwater.     

天津市PM10和PM2.5中水溶性离子化学特征及来源分析

2011年5月—2012年1月在天津市南开区设立采样点,采集大气中PM10和PM2.5样品。采用离子色谱法测定颗粒物中水溶性无机阴离子、阳离子成分,分析其主要组成、季节变化及污染来源。结果表明,天津市PM10中离子平均浓度为71.2μg/m3,占PM10质量浓度的33.7%。PM2.5中离子平均浓度为54.8μg/m3,占PM2.5质量浓度的39.6%。NH+4、SO2-4、NO-3等二次离子含量较大,且夏季含量均为最高。颗粒物总体呈酸性,PM10中∑阳离子/∑阴离子平均值为0.92,PM2.5中该比值为0.75。来源分析发现,PM10可能主要来源于海盐、工业源、二次反应及土壤和建筑尘等,PM2.5则主要来源于海盐污染源、二次反应及生物质燃烧。     

A low-tech, low-cost passive sampler for the long-term monitoring of phosphate loads in rivers and streams

The concentration of dissolved reactive phosphorus (DRP) in rivers can change intermittently within minutes depending on the weather and water discharge (Q), or activities in the watershed. Accordingly, accurate estimation of the annual DRP load requires frequent sampling or even continuous monitoring, which is laborious and cost-intensive. We present the design and laboratory evaluation of a new, robust, low-cost, low-tech device based on passive samplers (P-traps). The traps use Fe-(oxy)hydroxide coated quartz sand as an adsorbent enclosed in a vertical grid of individual cells separated from the river water by filter membranes. They are inexpensive, easy to handle, resistant to repeated desiccation and immersion and exposable for several months. They permit estimation of discharge dependent time weighted average DRP concentrations (C-Q relationships) and annual P loads of rivers characterized by highly variable DRP concentrations with a relative accuracy of +/- 3%.