环境介质中药物和个人护理品的潜在风险研究进展

药物和个人护理品(PPCPs)在环境介质中的残留物作为一种新型污染物在环境介质中的转归,逐渐成为环境工作者和公众密切关注的焦点.这些物质特殊的物化特性及其被大量使用的现状,给生态环境和人类健康带来一定的潜在风险.由PPCPs使用所引发的风险问题正在成为当前学术界所面临的研究方向之一.欧洲和美国已经开始了对PPCPs的风险评估研究,中国研究者仅对某些药物的分析检测方法进行了初步探索,对PPCPs的潜在风险研究还呈空白.从PPCPs的物化特性及其对环境介质的影响入手,对其潜在风险进行了分析,并介绍了目前国外PPCPs风险研究进展,以期为中国开展PPCPs的风险评估提供参考.     

Measurement of black carbon aerosols near two Chinese megacities and the implications for improving emission inventories

Knowledge of the distribution and sources of black carbon (BC) is essential to understanding its impact on radiative forcing and the establishment of a control strategy. In this study, we analyze atmospheric BC and its relationships with fine particles (PM_2.5) and trace gases (CO, NO_y and SO₂) measured in the summer of 2005 in two areas frequently influenced by plumes from Beijing and Shanghai, the two largest cities in China. The results revealed different BC source characteristics for the two megacities. The average concentration of BC was 2.37 (±1.79) and 5.47 (±4.00) μg m^?3, accounting for 3.1% and 7.8% of the PM_2.5 mass, in Beijing and Shanghai, respectively. The good correlation between BC, CO and NO_y (R² = 0.54–0.77) and the poor correlation between BC and SO₂ suggest that diesel vehicles and marine vessels are the dominant sources of BC in the two urban areas during summer. The BC/CO mass ratio in the air mass from Shanghai was found to be much higher than that in the air mass from Beijing (0.0101 versus 0.0037 ΔgBC/ΔgCO), which is attributable to a larger contribution from diesel burning (diesel-powered vehicles and marine vessels) in Shanghai. Based on the measured ratios of BC/CO and annual emissions of CO, we estimate that the annual emissions of BC in Beijing and Shanghai are 9.51 Gg and 18.72 Gg, respectively. The improved emission rates of BC will help reduce the uncertainty in the assessment of the impact of megacities on regional climate.     

Measurement of aerosol number size distributions in the Yangtze River delta in China: Formation and growth of particles under polluted conditions

Particle size distribution is important for understanding the sources and effects of atmospheric aerosols. In this paper we present particle number size distributions (10 nm–10 μm) measured at a suburban site in the fast developing Yangtze River Delta (YRD) region (near Shanghai) in summer 2005. The average number concentrations of ultrafine (10–100 nm) particles were 2–3 times higher than those reported in the urban areas of North America and Europe. The number fraction of the ultrafine particles to total particle count was also 20–30% higher. The sharp increases in ultrafine particle number concentrations were frequently observed in late morning, and the particle bursts on 5 of the 12 nucleation event days can be attributed to the homogeneous nucleation leading to new particle formation. The new particle formation events were characterized with a larger number of nucleation-mode particles, larger particle surface area, and larger condensational sink than usually reported in the literature. These suggest an intense production of sulfuric acid from photo-oxidation of sulfur dioxide in the YRD. Overall, the growth rate of newly formed particles was moderate (6.4 ± 1.6 nm h^?1), which was comparable to that reported in the literature.     

青藏高原古里雅冰芯中痕量元素镉记录的大气污染:1900-1991

对取自青藏高原古雅冰帽的冰芯上部２０ｍｎ的样品中有毒金属镉反映的大气污染进行了研究,利用电感耦合等等离子体质谱仪对镉的浓度进行了检测,镉的浓度在２．２８－３０１ｐｇ．ｍｌ＾－１,平均为５１ｐｇ．ｍｌ＾－１,镉的浓度高于极地雪冰相应的时间的浓度。     

青藏高原希夏邦马冰芯中阴阳离子的研究

本文对希夏邦马浅冰芯的资料进行了分析,发同离子含量变化显示强烈的周期性变化,反映了季节变化的特征。离子浓度高低变化将指示气候的冷暖变化。并与降水量变化有着反相关关系,与δ＾１８Ｏ存在着对应关系,但δ＾１８Ｏ对气候变化的反映没有各咱郭反映灵敏。     

危险废物安全填埋场的环境经济分析

遵循国家颁布的《中华人民共和国固体废物污染环境防治》、对工业固体废物中危险废物处理处置技术和方法进行系统研究,推荐采用安全填埋法处置工业危险废物。从环境经济角度论证安全填埋法方案可行性,采用效益费用分析法对实例进行分析,最终得出安全填埋法方案的实用性,可行性结论。     

广东省甘蔗专用BB肥的研制、施用及效益

研究了广东省几个主栽甘蔗品种的肥料效应,提出广东省甘蔗专用BB肥的适宜配肥比例为N：P2O5：K2O=1：0．30：0．78-1．00．在中等肥力土壤上,高产甘蔗推荐施肥量为甘蔗专用BB肥1140-1410kg/hm2.施用甘蔗专用BBe肥具有极显著的增产效益,其肥效优于通用型复合肥（15-15-15）和当地肥料,单位面积投肥成本低,经济效益高．     

CO3O4/介孔分子筛催化剂对苯催化完全氧化的研究

分别以介孔分子筛MCM-41、MCM-48、SBA-15为载体,采用等体积浸渍法制备了氧化钴/介孔分子筛催化剂,利用N2吸附、X射线衍射、程序升温还原等技术对催化剂进行了表征,考察了Co3O4的负载量及载体的孔结构对催化剂完全催化氧化苯的性能的影响.结果表明,Co3O4的负载量为20%时,催化剂的催化活性最好;载体的孔径和催化剂的可还原性能是影响催化活性的主要因素,催化剂活性顺序为Co3O4/SBA-15>Co3O4/MCM-41>Co3O4/MCM-48.     

Nanoparticle-free and self-healing amphiphobic membrane for anti-surfactant-wetting membrane distillation

In membrane distillation (MD), complicated feed water with amphiphilic contaminants induces fouling/wetting of the MD membrane and can even lead to process failure. This study reports a facile approach to fabricate robust and self-healing hybrid amphiphobic membranes for anti-surfactant-wetting MD based on the ultra-low surface energy of fluorinated polyhedral oligomeric silsesquioxanes (F-POSS) and its thermal induced motivation and rotation. The thermal treatment makes the membranes achieving amphiphobicity at a very low cost of F-POSS (13.04 wt.%), which is about 1/3 of without thermal treatment. The prepared membrane exhibits excellent amphiphobicity, i.e. ethanol contact angle of 120.3°, without using environmentally toxic fluorinated nanoparticles. Robust MD performance was observed for the amphiphobic membrane in concentrated sodium dodecyl sulfate (SDS) feed solutions. Furthermore, the fabricated membrane exhibited stable amphiphobicity even in extreme environments, including strong acid or alkaline solutions. In the event of a damaged or abraded membrane surface where the F-POSS can be removed, the amphiphobic membrane exhibits self-healing ability with additional thermal treatment. This simple approach without the use of nanoparticles provides an environmentally friendly way for fabrication of amphiphobic membranes for anti-surfactant-wetting membrane distillation.     

The selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts

A Ce_(0.3)TiO_xoxide carrier was synthesized via a sol–gel process,and Ce_(0.3)TiO_xsupported metal(M=Cd,Mn,Fe,W,Mo)oxide catalysts were prepared by the method of incipient-wetness impregnation.The catalysts were characterized by means of X-ray diffraction(XRD),Brunauer–Emmett–Teller(BET)analysis,scanning electron microscopy(SEM),transmission electron microscopy(TEM),Fourier transform infrared(FT–IR)spectroscopy,UV–Visdiffusereflectancespectroscopy(UV–VisDRS),and Temperature-programmed reduction with H_2(H_2-TPR).The catalytic activities for de-NO_(x )were evaluated by the NH_3-SCR reaction.Among all the catalysts tested,the 2 wt.%Cd/Ce_(0.3)TiO_xcatalyst exhibited the best NH_3-SCR performance,with a wide temperature window of 250–450°C for NO conversion above 90%.Moreover,the catalyst showed N_2 selectivity greater than 99%from 200 to 450°C.