建设项目竣工环境保护验收监测的现场勘察

现场勘察是对建设项目主体工程（即生产设施）的勘察和对配套建设的环境保护设施及措施的勘察和检查,是检查建设项目是否能够开展验收监测、确定验收监测范围和制定验收监测方案的一个关键步骤,也是验收监测环境保护管理检查的一个重要组成部分.文章从建设项目资料的收集和查阅、建设项目的工程概况、对各类污染源及排放口的检查等八个方面对现场勘察的内容作了较为详细的介绍,以期做好建设项目的现场勘察,为验收监测方案的编制乃至验收监测报告的编写提供详实的基础资料.     

鄂尔多斯市城市道路交通噪声的现状分析及防治对策——以东胜区为例

通过分析鄂尔多斯市2007—2010年东胜区道路交通噪声污染现状,指出存在的主要问题,提出了相应的污染控制及防治措施,为有效改善城市道路交通噪声污染提供科学依据。     

土地利用总体规划环境影响评价技术方法的研究

从国内外土地利用总体规划环境影响评价的技术方法研究出发,总结了各技术方法的优势和缺点。最后提出了完善土地利用总体规划环境影响技术方法的建议。     

过年“画”吉祥

快过年了!每当这个时候,按照我国的传统习俗,各家各户都在为迎接农历新年的到来忙碌着,空气中充满了喜庆与祥和的气氛。人们用扫房子、贴春联、挂年画、备年货等方式来消除一年的晦气,憧憬来年的顺心、顺意和顺利。这些美好的期盼和向往都是中国传统文化和古老民俗的体现,中国民间艺术在这期间也得到了充分的展示。     

富营养化水体中黑水团的吸收及反射特性分析

对黑水团水体光学特性进行研究,是利用遥感技术监测和评估黑水团事件的前提.针对2015年7月在太湖发生的黑水团现象,采集了太湖黑水团区(区域一)、蓝藻水华区(区域二)、清水区(区域三)共36个水样,对这3个区域的水体遥感反射率以及吸收特性进行对比分析.结果表明:1区域一水体的总颗粒物、色素颗粒物和非色素颗粒物吸收系数比区域二、区域三高出1~2倍,在400~500 nm之间,区域一CDOM吸收系数相比另外两个区域的水体高出2倍左右.导致黑水团区域水体具有很低的遥感反射率,被人眼感知时呈现为黑色;2黑水团区域水体M值低于滇池、巢湖和太湖的M值变化范围,说明黑水团中CDOM的腐殖酸含量较高.此外,叶绿素a浓度与CDOM在350 nm处吸收系数之间具有很好的相关性,表明蓝藻的降解可能是黑水团中CDOM的一个主要来源;3在380 nm之后,黑水团区域的水体总吸收以色素颗粒物占主导,但在短波350~380 nm处,CDOM对总吸收的贡献率高于色素颗粒物和非色素颗粒物.     

三峡库区(重庆-宜昌段)沉积物中钒的污染特征及生态风险评价

为全面了解三峡库区(重庆—宜昌段)干支流沉积物中钒的含量水平、空间分布、赋存形态、污染程度,在三峡库区采集水体沉积物样品67个,测定了沉积物中钒的含量及其化学赋存形态,并采用地积累指数法和潜在生态危害指数法进行分析和评价.结果表明:1三峡库区研究区范围内沉积物中钒的含量范围为89.4~175.2 mg·kg-1,平均值为123.7 mg·kg-1,略高于长江沉积物背景值;2库区沉积物中钒的空间分布特征主要呈现库区干流含量大于支流,干流下游沉积物中钒含量高于上游;3沉积物中钒含量的极值点出现在较发达县(区)附近,考虑其来源可能是人为源汇入;4库区沉积物中钒的赋存形态主要以残渣态为主,所占质量分数为80%~89%,并与总量呈现显著正相关关系;5沉积物中钒污染程度较小,潜在环境危害影响较弱.     

Primary neuronal-astrocytic co-culture platform for neurotoxicity assessment of di-(2-ethylhexyl) phthalate

Plastics such as polyvinyl chlorides （PVC） are widely used in many indoor constructed environments; however, their unbound chemicals, such as di-（2-ethylhexyl） phthalates （DEHP）, can leach into the surrounding environment. This study focused on DEHP＇s effect on the central nervous system by determining the precise DEHP content in mice brain tissue after exposure to the chemical, to evaluate the specific exposure range. Primary neuronal-astrocyte co-culture systems were used as in vitro models for chemical hazard identification of DEHP. Oxidative stress was hypothesized as a probable mechanism involved, and therefore the total reactive oxygen species （ROS） concentration was determined as a biomarker of oxidative stress. In addition, NeuriteTracer, a neurite tracing plugin with ImageJ, was used to develop an assay for neurotoxicity to provide quantitative measurements of neurological parameters, such as neuronal number, neuron count and neurite length, all of which could indicate neurotoxic effects. The results showed that with 1 nmol/L DEHP exposure, there was a significant increase in ROS concentrations, indicating that the neuronal-astrocyte cultures were injured due to exposure to DEHP. In response, astrocyte proliferation （gliosis） was initiated, serving as a mechanism to maintain a homeostatic environment for neurons and protect neurons from toxic chemicals. There is a need to assess the cumulative effects of DEHP in animals to evaluate the possible uotake and effects on the human neuronal system from exoosure to DEHP in the indoor environment.     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.     

Formation pathways of brominated products from benzophenone-4 chlorination in the presence of bromide ions

The brominated products, formed in chlorination treatment of benzophenone-4 in the presence of bromide ions, were identified, and the formation pathways were proposed.Under disinfection conditions, benzophenone-4 would undertake electrophilic substitution generating mono- or di-halogenated products, which would be oxidized to esters and further hydrolyzed to phenol derivatives. The generated catechol intermediate would be transformed into furan-like heterocyclic product. The product species were p H-dependent,while benzophenone-4 elimination was chlorine dose-dependent. When the chlorination treatment was performed on ambient water spiked with benzophenone-4 and bromide ions, most of brominated byproducts could be detected, and the acute toxicity significantly increased as well.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.