Numerical simulation of hydrogen–air detonation for damage assessment in realistic accident scenarios

An accidental hydrogen release within an equipment enclosure may result in the presence of detonable mixture in a confined environment. From a safety standpoint, it is then useful to assess the potential for damage. In that context, numerical simulation of the sequence of events subsequent to detonative ignition provides a useful tool, although with obvious limitations. This article describes the procedure, summarizes two case studies, and reviews the limitations. First, a hydrogen dispersion pattern is obtained from numerical simulation of dispersion, using a commercial package designed primarily for incompressible flow. This dispersion cloud is then used as the initial condition in an inviscid, compressible, reactive flow simulation. To force detonative ignition, a sufficiently large amount of energy is deposited in a small region that corresponds to the ignition location. Chemistry is modeled using a single step Arrhenius model. Because the wave thickness is small compared with the computational domain, a fine mesh is needed, limiting the practicality of the process to two-dimensional geometries. This is the most significant limitation; it is conservative. The two cases described in the paper include an electrolyzer, in which a small release occurs, leading potentially to some damage to the enclosure, and a reformer, in which the consequences are potentially more serious.     

Disinfection By-Products in Water Produced by Ozonation and Chlorination

Water produced by advanced treatment of a groundwater was evaluated to determine the amount of DBPs (Disinfection By-Products) including trihalomethanes (THMs). Both Gas Chromatography (GC) and Gas Chromatography/Mass Spectrometry (GS/MS) were adopted for detection and identification of DBPs such as trihalomethanes (THMs), halo-acetic acids (HAAs) and aldehydes. Two disinfection modes (ozonation followed by chlorination and chlorination alone) were compared to determine the DBPs generation. The mutagenitic acivity of ozonated water, chlorinated water after ozonation and potable water was assessed using the Ames test. Chloroform, dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA) were the main constituents of THMs and HAAs, respectively. THMs accounted for more than 85% of all DBPs measured, whereas haloacetic acids accounted for around 14%. Ozonation followed by chlorination proved to be better in terms of THMs and HAAs control. The combined system produced 28.3% less DBPs compared to chlorination alone. Ozonation was found capable of reducing mutagenic matter in the groundwater by 54.7%. The combined system also resulted in water with no mutagenicity.     

The impact of motorcycle traffic on soil and vegetation of stabilized coastal dunes, Israel

This study aimed to assess the response of soil and annual plant vegetation of stabilized coastal dunes in Israel, to varying intensities of off-road motorcycle (ORM) traffic, and to assess their resistance and resilience to such a disturbance. A standard experimental procedure that included 0, 20, 50, 100 and 200 ORM straight passes and 150 ORM turn passes was used. Plant ground cover, mean plant height, species richness, species diversity, soil penetrable depth, organic matter and moisture contents were measured on several dates within a period of 372 days after the experiment. Results have shown that: (1) ORM passes had a significant immediate impact on annual plants that increased with traffic intensity. The impact on the soil was detected only as an increase of penetrable depth. (2) The maximum impact on annual plants was observed in the wheel ruts and turn areas. The impact on the area between the wheel ruts and on the margins outside the wheel ruts was indirect and smaller. (3) Annual plant ground cover and mean plant height were less sensitive parameters than species richness and species diversity for determining the impact of ORM traffic on the area. (4) One year after the experiment, soil and annual plant vegetation in all passes were very similar to their pre-experimental condition. This indicates high resilience and recovery potential of the Mediterranean stabilized coastal dune ecosystem to ORM disturbance.     

Genetic protein variation in red mullet (Mullus barbatus) and striped red mullet (M. surmuletus) populations from the Mediterranean Sea

Starch-gel electrophoresis of allozymes was used to differentiate the two red mullet species (Mullus barbatus L. and M. surmuletus L.) in the Mediterranean Sea and, further, to investigate the genetic stock structure of M. barbatus in the eastern Mediterranean area. Twenty putative enzyme-coding loci were examined in eight M. barbatus samples caught in the Aegean and Ionian Seas (Greece) and in the Gulf of Lion (France), and two M. surmuletus samples caught in the Aegean and Gulf of Lion. A high degree of genetic polymorphism was found in both species. Species-specific electrophoretic patterns were found in PGI* and PGM*. Estimates of variance of allele frequencies among samples (F _ST) and ² analyses both revealed significant differences (P < 0.05) among the M. barbatus samples. Most of the genetic variation was among samples regardless of region. The mean value of Nei's genetic distance between the two species was 0.329. Genetic distance among M. barbatus samples was low (maximum Nei's D = 0.012), with the sample from Platania differing most from other M. barbatus samples. This is probably be due to founder effects existing at this area. These results suggest that allozyme analysis may provide important information on the genetic structure of the red mullet to ensure sustainable management of this species. Received: 7 May 1997 / Accepted: 13 October 1997     

IFTCIP: An Integrated Optimization Model for Environmental Management under Uncertainty

In this study, an interval-fuzzy two-stage chance-constrained integer programming (IFTCIP) method is developed for supporting environmental management under uncertainty. The IFTCIP improves upon the existing interval, fuzzy, and two-stage programming approaches by allowing uncertainties expressed as probability distributions, fuzzy sets, and discrete intervals to be directly incorporated within a general mixed integer linear programming framework. It has advantages in uncertainty reflection, policy investigation, risk assessment, and capacity-expansion analysis in comparison to the other optimization methods. Moreover, it can help examine the risk of violating system constraints and the associated consequences. The developed method is applied to the planning for facility expansion and waste-flow allocation within a municipal solid waste management system. Violations of capacity constraints are allowed under a range of significance levels, which reflects tradeoffs between the system cost and the constraint-violation risk. The results indicate that reasonable solutions for both binary and continuous variables have been generated under different risk levels. They are useful for generating desired decision alternatives with minimized system cost and constraint-violation risk under various environmental, economic, and system-reliability conditions. Generally, willingness to take a higher risk of constraint violation will guarantee a lower system cost; a strong desire to acquire a lower risk will run into a higher system cost.     

Hydrogeochemical data as a tool for exploration and mapping: a case study from part of Afikpo Basin southeastern Nigeria

Fourteen (14) characters from six (6) water samples collected from springs, ponds, and streams located in Lower Cretaceous sedimentary area of Afikpo Basin have been analyzed. These include pH, turbidity, conductivity, total dissolved solid, hardness, Fe²⁺, Ca²⁺, Mg²⁺, K⁺, NO₃ ^?, Cl^?, SO₄ ^2?, and Na⁺. These sediments, which are Turonian and Coniacian in age, are subdivided into two by a basic rock dyke. Results of the analyses show clearly that the Turonian sediments, intruded by dolerite, have net Fe²⁺, HCO₃ ^?, Ca²⁺, Mg²⁺, Mn²⁺, Cl^?, and SO₄ ^2? concentration while those from the younger Coniacian sediment have net higher amounts of K⁺, Na⁺, and Mn²⁺. The overriding mafic minerals in the basic intrusive rock possibly led to higher leaching into ground water system near it. On the other hand, the presence of feldsparthic to kaolinitic sands of the younger Coniacian units led to higher K⁺ and Na⁺ matter in the water from these zones. The formations dip away from the older sediments. Concentrations of these characters are within acceptable drinking water standards by World Health Organization but noticeable anomalous zones for Fe²⁺, Mg²⁺, and Ca²⁺ are zones of basic rock suites. Areas with greater Na⁺ and K⁺ are traceable to sandy units. It is thus concluded that more analysis of surface, subsurface, and pond water samples can be utilized for minerals search and geological mapping. At this stage, it forms a veritable reconnaissance tool.     

Calculating losses of crops in Denmark caused by high ozone levels

In order to help guide air pollution legislation at the European level, harmful air pollution effects on agriculture crops and the consequent economic implications for policy have been studied for more than a decade. Ozone has been labeled as the most serious of the damaging air pollutants to agriculture, where growth rates and consequently yields are dramatically reduced. Quantifying the effects has formed a key factor in policymaking. Based on the widely held view that AOT40 (Accumulated exposure Over Threshold of 40 ppb) is a good indicator of ozone-induced damage, the Danish Eulerian Model (DEM) was used to compute reduced agriculture yields on a 50 km×50 km grid over Europe. In one set of scenarios, a ten year meteorological time series was combined with realistic emission inventories. In another, various idealized emission reduction scenarios are applied to the same meteorological time series. The results show substantial inter-annual variability in economic losses, due in most part to meteorological conditions which varied much more substantially than the emissions during the same period. It is further shown that, taking all uncertainties into account, estimates of ozone-induced economic losses require that a long meteorological record is included in the analysis, for statistical significance to be improved to acceptable levels for use in policy analysis. In this study, calculations were made for Europe as a whole, though this paper presents results relevant for Denmark.     

Micromorphology and chemistry of airborne particles in Brussels during agriculture working periods in surrounding region

The main objective of our research was to compare the airborne particle micromorphology and chemistry in the Brussels environment during agriculture working periods in the surrounding farming region. We used specific methods and instrumentation that are adapted to the climate peculiarities of the Brussels region, the period of investigations (12 months) and the proposed objectives. For the agricultural works we defined the following six periods: before sowing, sowing, after sowing, before harvest, harvest and after harvest. The results indicate a possible temporal correlation between agricultural work periods and airborne particle concentration, micromorphology and chemistry in the Brabant-Brussels region. For wheat and corn plant-growth periods, the average particle size, defined as the area obtained by a planar projection of the particulate, showed important variations in time. For sugar beet and endive, the average area size variations are less important. The roughness and sphericity parameters for the growth periods of the four different plants also showed significant differences. Many of the larger particulates (> 10 microm) are aggregates of even finer particles coated with many still finer ones. The airborne particle chemistry averages (atomic percentage At%), showed that three constituents (Si, S and Fe) dominate all the samples (except for particles 3-10 microm in size, which contain a relatively large percentage of Al). Applying similar investigation methods to study the correlations between airborne particle dynamics in urban zones and the agriculture working periods in their surrounding regions could be of interest to better understand the complexity of the PM problematic.     

Geochemical assessment of metal concentrations in sediment core of Korangi Creek along Karachi Coast, Pakistan

Sediment core from Korangi Creek, one of the polluted coastal locations along the Karachi Coast Pakistan, was collected to trace the history of marine pollution and to determine the impact of industrial activity in the area. Down core variation of metals such as Ca, K, Mg, Al, S, Ti, V, Cr, Mn, Fe, Ni, Cu and Zn was studied in the 72.0 cm core. Nuclear analytical techniques, proton induced X-rays emission (PIXE), was employed to ascertain the chemical composition in sediment core. Grain size analysis and sediment composition of cored samples indicated that Korangi creek sediments are clayey in nature. Correlation matrix revealed a strong association of Ni, Cu, Cr and Zn with Fe and Mn. To infer anthropogenic input, enrichment factor (EF), degree of contamination and pollution load index were calculated. EF showed severe enrichment in surface sediment for Ni, Cu, Cr and Zn, indicating increased industrial effluents discharge in recent years. The study suggests that heavy metal discharge in the area should be regulated. If the present trend of enrichment is allowed to continue unabated, it is most likely that the local food web complexes in the creek might be at highest risk.