Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

Supercritical water oxidation of polyvinyl alcohol and desizing wastewater：Influence of NaOH on the organic decomposition

Polyvinyl alcohol is a refractory compound widely used in industry. Here we report supercritical water oxidation of polyvinyl alcohol solution and desizing wastewater with and without sodium hydroxide addition. However, it is difficult to implement complete degradation of organics even though polyvinyl alcohol can readily crack under supercritical water treatment. Sodium hydroxide had a significant catalytic effect during the supercritical water oxidation of polyvinyl alcohol. It appears that the OH ion participated in the C-C bond cleavage of polyvinyl alcohol molecules, the CO2-capture reaction and the neutralization of intermediate organic acids, promoting the overall reactions moving in the forward direction. Acetaldehyde was a typical intermediate product during reaction. For supercritical water oxidation of desizing wastewater, a high destruction rate (98.25%) based on total organic carbon was achieved. In addition, cases where initial wastewater was alkaline were favorable for supercritical water oxidation treatment, but salt precipitation and blockage issues arising during the process need to be taken into account seriously.     

反硝化菌株DA-1的脱氮研究

菌株DA-1被发现能在好氧和厌氧环境中将硝酸盐转化为气态氮。在以NO3-为唯一氮源的条件下研究了碳源、C/N和pH值对菌株DA-1好氧和厌氧反硝化脱氮的影响。结果表明:同等条件下,48 h内菌株DA-1的厌氧脱氮效率高于好氧脱氮率;菌株DA-1能在好氧和厌氧条件下利用乙酸、柠檬酸以及葡萄糖进行细胞增殖和反硝化。在厌氧条件下,三者作为碳源时的反硝化效率分别为(34.04±0.15)%、(22.72±0.32)%和(11.32±0.06)%,均低于好氧条件下的(25.38±0.14)%、(17.52±0.11)%和(8.06±0.01)%。2种条件下均是乙酸为碳源时反硝化效率最高。而丁二酸仅能在厌氧环境中作为电子供体参与反硝化反应。C/N越高越有利于菌株DA-1的厌氧反硝化,当C/N为10时,反硝化效率最高为(35.06±0.19)%。而在好氧条件下,菌株反硝化效率随着C/N的升高,先升高再降低,当C/N为8时,反硝化效率最高;好氧和厌氧脱氮的最适pH值为7.0。体系偏酸或者偏碱都会造成菌株DA-1脱氮效率的降低并出现亚硝酸盐累积。厌氧环境中pH=5.0时累积的亚硝酸盐浓度高达(8.95±2.05)mg/mL。     

磁性多孔陶粒生物膜反应器处理焦化废水的试验研究

以磁性材料为原料,经过特定的工艺处理,对多孔陶瓷进行磁化改性获得磁性多孔载体,并将该载体应用于生物膜反应器中进行焦化废水处理试验。对不同类型的多孔陶粒载体进行对比试验,结果表明:磁性载体生物膜反应器对COD、NH3-N的去除率比普通活性污泥法高出25%³0%,比非载体生物膜反应器高出15%30%,比非载体生物膜反应器高出15%²0%左右。反应器的曝气量为1.5 L/h,曝气时间为10 h/d,温度为2520%左右。反应器的曝气量为1.5 L/h,曝气时间为10 h/d,温度为25³0℃。焦化废水经磁性载体生物膜反应器处理后,上清液中COD,NH3-N的去除率均在90%左右。出水浓度达到国家工业废水排放二级标准(GB18918-2002)。     

基于熵权的长沙市城市生态安全综合评估与预测

城市是一个社会-经济-自然复合生态系统,区域资源与城市自然系统是城市社会经济发展的重要基础和载体。城市生态安全评估是对未来的安全状态进行预测,以实现城市的可持续发展。文章以长沙市为例,在城市生态安全主要影响因素识别的基础上,应用PSR模型、熵权法等建立城市生态安全评估指标及计算方法,研究了长沙市近11年来生态安全的变化趋势。研究结果表明,1999-2009年间长沙生态安全的趋势由较不安全向较安全状态发展,生态安全值从25.4提高到60.7,人文环境响应是长沙生态安全改善的主导因素,资源环境压力,水土资源保持是限制长沙市生态安全的主要因素。     

化学铁盐辅助除磷对生物除磷的影响研究

化学辅助除磷有助于污水厂实现磷达标,但其对生物系统存在潜在的影响。针对除磷药剂对生物除磷过程的影响展开研究,选用硫酸亚铁进行化学辅助除磷。药剂形成的化学污泥干扰生物除磷过程且成分复杂,故以磷酸铁、氢氧化铁模拟化学污泥,由钾离子、K/P摩尔比计算出同步除磷中的生物除磷,来探讨化学污泥对聚磷菌释磷/吸磷过程的影响。结果表明,连续投加硫酸亚铁使聚磷菌的释磷量、吸磷量降低;系统中磷酸铁含量0.075 mmol/L时聚磷菌的释磷和吸磷能力提高了约25%,磷酸铁含量0.15 mmol/L时对聚磷菌吸磷有抑制作用;氢氧化铁对聚磷菌释磷、好氧初期吸磷均有抑制作用。生物污泥与化学污泥存在交互作用。     

呼和浩特地区污水厂能耗评价与碳排放分析

污水处理过程的能耗和温室气体排放方面的研究对于应对能源危机和气候危机具有重要作用。文章利用层次分析法,建立了具有4层15项指标的能耗评价体系。结合城镇污水处理系统的绿色指标体系,选取呼和浩特地区具有代表性、处理规模相近的2座中小型污水厂进行能耗评价。结果表明:处理能力利用率、处理工艺系统稳定性和污水厂高程布置所对应的3项评价指标在所选择的能耗影响因素中所占权重较大,分别为:0.143 0,0.302 4和0.145 6。进一步运用IPCC计算方法对污水处理厂进行碳排放概算,得出A、B污水处理厂的碳排放量分别为:19.401 t CO2/104t、18.378 t CO2/104t。A、B污水处理厂的实际比能耗分别为0.293 kW.h/m3、0.195 kW.h/m3。将碳排放数据与实际能耗情况对比得出:污水处理厂的能耗水平越高,单位碳排放量也越大。     

基于单颗粒质谱信息气溶胶分类方法的研究进展

气溶胶质谱仪在对气溶胶颗粒的监测过程中会产生大量单颗粒的化学成分和粒径信息,基于这些质谱数据能够推测颗粒的来源。而对气溶胶来源的分析,很大程度上是由颗粒的种类决定的,故对海量数据的分类就成为不可忽略的步骤。针对气溶胶质谱仪采集到的数据,概述了用于气溶胶分类的多种方法的理论核心、分类步骤及各自的优缺点等。据此可为今后气溶胶分类方法的研究提供建设性意见。     

渭南市大气环境容量计算及控制对策研究

以修正A值法估算渭南市大气环境容量,为渭南市大气总量控制提供科学依据。以箱模型为基本模型,利用陕西省气象台整编的1961-2008年气象资料,推导出宏观总量控制修正A值法,除韩城市、潼关县、浦城县、白水县和富平县A值大于国标A值,其余渭南各市县A值小于国标A值。在新空气质量标准标准的要求下,渭南市SO2、NOx、PM10环境容量分别为19.55×104t/a、10.50×104t/a和18.97×104t/a。为了保证各分区的环境质量,中架点源排放量与低源排放量之和应小于各分区容量,韩城市应注意改善中、低源NO x排放,其它区县NO x剩余容量有限,在严格的新空气质量标准的要求下,应加强对各区县中架点源与低架源的NO x控制,重点控制水泥行业、炼焦业和机动车的NO x排放。从整个城市考虑,从整个渭南市污染源排放来看,SO2总体排放量超过环境容量12.917×104t/a,NO x总体排放量超过环境容量8.016×104t/a,为了减少其对周边城市的影响,应提高火电厂脱硫效率,重点加快电厂脱硝设施建设。