Influence of Suwannee River humic acid on particle properties and toxicity of silver nanoparticles

Adsorption of natural organic matter (NOM) on nanoparticles can have dramatic impacts on particle dispersion resulting in altered fate and transport as well as bioavailability and toxicity. In this study, the adsorption of Suwannee River humic acid (SRHA) on silver nanoparticles (nano-Ag) was determined and showed a Langmuir adsorption at pH 7 with an adsorption maximum of 28.6 mg g⁻¹ nano-Ag. It was also revealed that addition of <10 mg L⁻¹ total organic carbon (TOC) increased the total Ag content suspended in the aquatic system, likely due to increased dispersion. Total silver content decreased with concentrations of NOM greater than 10 mg TOC L⁻¹ indicating an increase in nanoparticle agglomeration and settling above this concentration. However, SRHA did not have any significant effect on the equilibrium concentration of ionic Ag dissolved in solution. Exposure of Daphnia to nano-Ag particles (50 μg L⁻¹ and pH 7) produced a linear decrease in toxicity with increasing NOM. These results clearly indicate the importance of water chemistry on the fate and toxicity of nanoparticulates.     

Minimization of the formation of disinfection by-products

The drinking water industry is required to minimize DBPs levels while ensuring adequate disinfection. In this study, efficient and appropriate treatment scheme for the reduction of disinfection by-product (DBPs) formation in drinking water containing natural organic matter has been established. This was carried out by the investigation of different treatment schemes consisting of enhanced coagulation, sedimentation, disinfection by using chlorine dioxide/ozone, filtration by sand filter, or granular activated carbon (GAC). Bench scale treatment schemes were applied on actual samples from different selected sites to identify the best conditions for the treatment of water. Samples were collected from effluent of each step in the treatment train in order to analyze pH, UV absorbance at 254 nm (UVA₂₅₄), specific UV absorbance at 254 nm (SUVA₂₅₄), dissolved organic carbon (DOC), haloacetic acids (HAAs) and trihalomethanes (THMs). The obtained results indicated that using pre-ozonation/enhanced coagulation/activated carbon filtration treatment train appears to be the most effective method for reducing DBPs precursors in drinking water treatment.     

Chlorinated and brominated organic contaminants in fish from Shanghai markets: a case study of human exposure

In the present study were two favorite edible fish species for local residents, i.e., mandarin fish and crawfish, collected from the Shanghai market and analyzed for selected organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), hexabromocyclododecane (HBCDD), polybrominated diphenyl ethers (PBDEs) and methoxylated PBDEs (MeO-PBDEs). Efforts were also made to identify the potential sources of these contaminants. Comparable concentrations of hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs) and HBCDD were found in muscle tissue of mandarin fish from Guangdong (GDF), the Pearl River Delta and from Taihu Lake (TLF), the Yangtze River Delta. Levels of chlordanes, PCBs and PBDEs were about one magnitude lower in TLF compared to GDF. The concentrations of OCPs in the butter-like gland of the crawfish (CFB) were 2-5 times of those in the crawfish muscle (CFM) while concentrations of PCBs, PBDEs and MeO-PBDEs were comparable. The different patterns and levels of chlorinated and brominated organohalogen contaminants seen in mandarin fish from GDF and TLF indicates that different types of chemicals might be used in the two delta regions. The present study also shows a good correlation between the concentrations of hexachlorobenzene (HCB) and pentachloroanisol (PCA) in fish for the first time. Fish consumption limits based on chemical contaminants with non-carcinogenic effects were calculated. The estimated maximum daily consumption limit for GDF, TLF, CFM and CFB were 1.5, 2.6, 3.7 and 0.08 kg, respectively, indicating no significant risk regarding the persistent organic pollutants measured in the present study.     

Water pressure head and temperature impact on isoxaflutole degradation in crop residues and loamy surface soil under conventional and conservation tillage management

Laboratory incubations were performed in order to evaluate the dissipation of the proherbicide isoxaflutole in seedbed layer soil samples from conventional and conservation tillage systems and in maize and oat residues left at the soil surface under conservation tillage. The effects of temperature and water pressure head on radiolabelled isoxaflutole degradation were studied for each sample for 21 d. Mineralisation of isoxaflutole was low for all samples and ranged from 0.0% to 0.9% of applied ¹⁴C in soil samples and from 0.0% to 2.4% of applied ¹⁴C in residue samples. In soil samples, degradation half-life of isoxaflutole ranged from 9 to 26 h, with significantly higher values under conservation tillage. In residue samples, degradation half-life ranged from 3 to 31 h, with significantly higher values in maize residues, despite a higher mineralisation and bound residue formation than in oat residues. Whatever the sample, most of the applied ¹⁴C remained extractable during the experiment and, after 21 d, less than 15% of applied ¹⁴C were unextractable. This extractable fraction was composed of diketonitrile, benzoic acid derivative and several unidentified metabolites, with one of them accounting for more than 17% of applied ¹⁴C. This study showed that tillage system design, including crop residues management, could help reducing the environmental impacts of isoxaflutole.     

Distribution and bioavailability of ceria nanoparticles in an aquatic ecosystem model

Along with the increasing utilization of engineered nanoparticles, there is a growing concern for the potential environmental and health effects of exposure to these newly designed materials. Understanding the behavior of nanoparticles in the environment is a basic need. The present study aims to investigate the distribution and fate of ceria nanoparticles in an aquatic system model which consists of sediments, water, hornworts, fish and snails, using a radiotracer technique. Concentrations of ceria in the samples at regular time intervals were measured. Ceria nanoparticles were readily removed from the water column and partitioned between different organisms. Both snail and fish have fast absorption and clearance abilities. Hornwort has the highest bioaccumulation factors. At the end of the experiment, sediments accumulated most of the nanoparticles with a recovery of 75.7 ± 27.3% of total ceria nanoparticles, suggesting that sediments are major sinks of ceria nanoparticles.     

The removal of hydrogen sulfide in solution by ferric and alum water treatment residuals

This work investigated the characteristics and mechanisms of hydrogen sulfide adsorption by ferric and alum water treatment residuals (FARs) in solution. The results indicated that FARs had a high hydrogen sulfide adsorption capacity. pH 7 rather than higher pH (e.g. pH 8-10) was favorable for hydrogen sulfide removal. The Yan model fitted the breakthrough curves better than the Thomas model under varied pH values and concentrations. The Brunauer-Emmett-Teller surface area and the total pore volume of the FARs decreased after the adsorption of hydrogen sulfide. In particular, the volume of pores with a radius of 3-5 nm decreased, while the volume of pores with a radius of 2 nm increased. Therefore, it was inferred that new adsorption sites were generated during the adsorption process. The pH of the FARs increased greatly after adsorption. Moreover, differential scanning calorimetry analysis indicated that elemental sulfur was present in the FARs, while the derivative thermal gravimetry curves indicated the presence of sulfuric acid and sulfurous acid. These results indicated that both oxidization and ligand exchange contribute to the removal of hydrogen sulfide by FARs. Under anaerobic conditions, the maximum amount of hydrogen sulfide released was approximately 0.026 mg g(-1), which was less than 0.19% of the total amount adsorbed by the FARs. The hydrogen sulfide that was released may be re-adsorbed by the FARs and transformed into more stable mineral forms. Therefore, FARs are an excellent adsorbent for hydrogen sulfide.     

Spatial distribution and loading amounts of particle sorbed and dissolved perfluorinated compounds in the basin of Tokyo Bay

In this study, we analyzed over 30 types of PFCs, including precursors in both the dissolved phase and particle solid phase, in 50 samples of river water collected from throughout the Tokyo Bay basin. PFCs were detected in suspended solids (SSs) at levels ranging from <0.003-4.4 ng L(-1) (0.11-2470 ng g(-1) dry weight). The concentrations of PFCs in the SS were one to two order(s) of magnitude lower than those of PFCs in the dissolved phase. Relatively high levels of PFCs (total of 35 PFCs) in SS were observed in urbanized areas. The concentration of PFCAs, including PFOA and PFNA, were significantly correlated with the geographic index as artificial area (R(2) of the linear regression curve in a double logarithmic plot: 0.09-0.55). Conversely, PFOS and FOSA were significantly correlated with the arterial traffic area (R(2) in a double logarithmic plot: 0.29-0.55). Those spatial trends were similar to the trends in dissolved PFCs. We estimated the loading amount of PFCs into Tokyo Bay from six main rivers and found that more than 90% of the total PFCs reached Tokyo Bay in the dissolved phase. However, 40.0-83.5% of the long chain PFCAs (C12-C15), were transported as particle sorbed PFCs. Rain runoff events might increase the loading amount of PFCs in SS. Overall, the results presented herein indicate that greater attention should be given to PFCs, especially for longer chain PFCs in SS in addition to dissolved PFCs.     

Quantitative analysis of perfluorinated chemicals in media for in vitro fertilization and related samples

The actual standard in vitro fertilization (IVF) protocol recommends an overnight gamete co-incubation. All of the culture media used for human IVF are supplemented with serum or albumin. In the present study, we determined the concentrations of perfluorinated chemicals (PFCs) in IVF media (IVFM) and related samples by liquid chromatography with tandem mass spectrometry (LC/MS/MS). The results indicated that the concentrations of PFOS and PFOA in the protein source were higher than those in the IVFM samples. Compared with human plasma concentrations of PFCs, PFCs in all of the IVFM samples, such as PFBS, PFHxS and PFOA, were either not detected or present at only trace levels, even when protein source was added. LC/MS/MS could be used to determine PFCs in IVFM samples in future studies of the effects of PFC exposure on intrauterine insemination.     

An integrated method for removal of harmful cyanobacterial blooms in eutrophic lakes

As the eutrophication of lakes becomes an increasingly widespread phenomenon, cyanobacterial blooms are occurring in many countries. Although some research has been reported, there is currently no good method for bloom removal. We propose here a new two-step integrated approach to resolve this problem. The first step is the inactivation of the cyanobacteria via the addition of H(2)O(2). We found 60 mg/L was the lowest effective dose for a cyanobacterial concentration corresponding to 100 μg/L chlorophyll-a. The second step is the flocculation and sedimentation of the inactivated cyanobacteria. We found the addition of lake sediment clay (2 g/L) plus polymeric ferric sulfate (20 mg/L) effectively deposited them on the lake bottom. Since algaecides and flocculants had been used separately in previous reports, we innovatively combined these two types of reagents to remove blooms from the lake surface and to improve the dissolved oxygen content of lake sediments.