Electrodeposition of rare-earth elements from neodymium magnets using molten salt electrolysis

Rare-earth element is an important target for recycling in Japan. In our previous work, we demonstrated the selective leaching of rare-earth elements from waste neodymium magnets using chloride molten salt electrolysis. In this study, we investigated the electrodeposition of rare-earth elements using liquid metal as a cathode. The reduction potential obtained using a liquid-zinc electrode was higher than that obtained using a solid molybdenum electrode. A zinc–rare-earth alloy was formed as the electrodeposit. The total rare-earth element content of the electrodeposit was more than 99.8 mass% without zinc and other composition of electrolysis. The activity of rare-earth elements decreased upon alloy formation, suggesting that the oxidation rate of electrodeposited alloy will be decreased.     

Variability in the primary emissions and secondary gas and particle formation from vehicles using bioethanol mixtures

Bioethanol for use in vehicles is becoming a substantial part of global energy infrastructure because it is renewable and some emissions are reduced. Carbon monoxide (CO) emissions and total hydrocarbons (THC) are reduced, but there is still controversy regarding emissions of nitrogen oxides (NO_x), aldehydes, and ethanol; this may be a concern because all these compounds are precursors of ozone and secondary organic aerosol (SOA). The amount of emissions depends on the ethanol content, but it also may depend on the engine quality and ethanol origin. Thus, a photochemical chamber was used to study secondary gas and aerosol formation from two flex-fueled vehicles using different ethanol blends in gasoline. One vehicle and the fuel used were made in the United States, and the others were made in Brazil. Primary emissions of THC, CO, carbon dioxide (CO₂), and nonmethane hydrocarbons (NMHC) from both vehicles decreased as the amount of ethanol in gasoline increased. NO_x emissions in the U.S. and Brazilian cars decreased with ethanol content. However, emissions of THC, CO, and NO_x from the Brazilian car were markedly higher than those from the U.S. car, showing high variability between vehicle technologies. In the Brazilian car, formation of secondary nitrogen dioxide (NO₂) and ozone (O₃) was lower for higher ethanol content in the fuel. In the U.S. car, NO₂ and O₃ had a small increase. Secondary particle (particulate matter [PM]) formation in the chamber decreased for both vehicles as the fraction of ethanol in fuel increased, consistent with previous studies. Secondary to primary PM ratios for pure gasoline is 11, also consistent with previous studies. In addition, the time required to form secondary PM is longer for higher ethanol blends. These results indicate that using higher ethanol blends may have a positive impact on air quality.

Implications: The use of bioethanol can significantly reduce petroleum use and greenhouse gas emissions worldwide. Given the extent of its use, it is important to understand its effect on urban pollution. There is a controversy on whether there is a reduction or increase in PM emission when using ethanol blends. Primary emissions of THC, CO, CO₂, NO_x, and NMHC for both cars decreased as the fraction of ethanol in gasoline increased. Using a photochemical chamber, the authors have found a decrease in the formation of secondary particles and the time required to form secondary PM is longer when using higher ethanol blends.     

Modeling seasonal variations of long-term soil CO<Subscript>2</Subscript> emissions in an orchard plantation in a semiarid area,SE Turkey

Emissions of soil CO₂ under different management systems have a significant effect on the carbon balance in the atmosphere. Soil CO₂ emissions were measured from an apricot orchard at two different locations: under the crown of trees (CO₂-UC) and between tree rows (CO₂-BR). For comparison, one other measurement was performed on bare soil (CO₂-BS) located next to the orchard field. Analytical data were obtained weekly during 8 years from April 2008 to December 2016. Various environmental parameters such as air temperature, soil temperature at different depths, soil moisture, rainfall, and relative humidity were used for modeling and estimating the long-term seasonal variations in soil CO₂ emissions using two different methods: generalized linear model (GLM) and artificial neural network (ANN). Before modeling, data were randomly split into two parts, one for calibration and the second for validation, with a varying number of samples in each part. Performances of the models were compared and evaluated using means absolute of estimations (MAE), square root of mean of prediction (RMSEP), and coefficient of determination (R²) values. CO₂-UC, CO₂-BR, and CO₂-BS values ranged from 11 to 3985, from 9 to 2365, and from 8 to 1722 kg ha^?1 week^?1, respectively. Soil CO₂ emissions were significantly correlated (p?<?0.05) with some environmental variables. The results showed that GLM and ANN models provided similar accuracies in modeling and estimating soil CO₂ emissions, as the number of samples in the validation data set increased. The ANN was more advantageous than GLM models by providing a better fit between actual observations and predictions and lower RMSEP and MAE values. The results suggested that the success of environmental variables for estimations of CO₂ emissions using the two methods was moderate.     

Local varieties of cassava: conservation,cultivation and use in Uganda

The study explored the theory that on-farm conservation of cassava germplasm is influenced by farmers’ traditional and cultural preferences of particular varieties. Traditional knowledge practices that are used for on-farm conservation of cassava germplasm as well as cassava attributes for selection were assessed. The findings obtained from the study indicated that farmers use traditional knowledge to select and preserve cassava germplasm for future use. It was also clear that farmers have their preferences such as culinary attributes, storability in the ground, early maturity and cooking quality to mention but a few that influence the decisions taken to retain or abandon cultivation of varieties. Therefore, by planting varieties in multiples plots, replanting immediately after harvesting, sharing with others in the community and planting disease-free materials, farmers ensure that they preserve varieties of interest for decades. The information generated during this study could inform development policies tailored toward ensuring sustainable on-farm conservation of cassava genetic resources.     

Total soil available nitrogen under perennial grasses after burning and defoliation

Total soil available nitrogen concentrations (NO^–3 + NH ₄ ⁺ ) were determined underneath plants of the more-competitive Poa ligularis, mid-competitive Nassella tenuis and the less-competitive Amelichloa ambigua exposed to various combinations of controlled burning and defoliation treatments. Defoliations were at the vegetative (V), internode elongation (E) or both developmental morphology stages (V + E) during two years after burning in northeastern Patagonia, Argentina. Hypotheses were that (1) concentrations of total soil available nitrogen after burning are greater underneath burned than unburned plants. With time, these differences, however, will gradually disappear; (2) greater total soil available nitrogen concentrations are underneath plants of the more- than less-competitive perennial grasses; and (3) total soil available nitrogen is similar or lower underneath plants defoliated at the various developmental morphology stages in all three study species than on untreated controls at the end of the study. Concentration of total soil available nitrogen increased 35% (p < 0.05) on average after the first six months from burning in comparison to control plants. However, these differences disappeared (p > 0.05) towards the end of the first study year. Total soil available nitrogen concentrations were at least 10% lower underneath the less competitive N. tenuis and A. ambigua than the more competitive P. ligularis on average for all treatments, although differences were not significant (p > 0.05) most of the times. Defoliation had practically no effect on the concentration of total soil available nitrogen. Rather than any treatment effect, total soil nitrogen concentrations were determined by their temporal dynamics in the control and after the experimental fire treatments.     

Project house water: a novel interdisciplinary framework to assess the environmental and socioeconomic consequences of flood-related impacts

Protecting our water resources in terms of quality and quantity is considered one of the big challenges of the twenty-first century, which requires global and multidisciplinary solutions. A specific threat to water resources, in particular, is the increased occurrence and frequency of flood events due to climate change which has significant environmental and socioeconomic impacts. In addition to climate change, flooding (or subsequent erosion and run-off) may be exacerbated by, or result from, land use activities, obstruction of waterways, or urbanization of floodplains, as well as mining and other anthropogenic activities that alter natural flow regimes. Climate change and other anthropogenic induced flood events threaten the quantity of water as well as the quality of ecosystems and associated aquatic life. The quality of water can be significantly reduced through the unintentional distribution of pollutants, damage of infrastructure, and distribution of sediments and suspended materials during flood events. To understand and predict how flood events and associated distribution of pollutants may impact ecosystem and human health, as well as infrastructure, large-scale interdisciplinary collaborative efforts are required, which involve ecotoxicologists, hydrologists, chemists, geoscientists, water engineers, and socioeconomists. The research network “project house water” consists of a number of experts from a wide range of disciplines and was established to improve our current understanding of flood events and associated societal and environmental impacts. The concept of project house and similar seed fund and boost fund projects was established by the RWTH Aachen University within the framework of the German excellence initiative with support of the German research foundation (DFG) to promote and fund interdisciplinary research projects and provide a platform for scientists to collaborate on innovative, challenging research. Project house water consists of six proof-of-concept studies in very diverse and interdisciplinary areas of research (ecotoxicology, water, and chemical process engineering, geography, sociology, economy). The goal is to promote and foster high-quality research in the areas of water research and flood-risk assessments that combine and build off-laboratory experiments with modeling, monitoring, and surveys, as well as the use of applied methods and techniques across a variety of disciplines.     

Simultaneous determination of eight metabolites of organophosphate and pyrethroid pesticides in urine

A simultaneous method for quantifying eight metabolites of organophosphate pesticides and pyrethroid pesticides in urine samples has been established. The analytes were extracted using liquid–liquid extraction coupled with WCX solid phase extraction (SPE) cartridges. Eight metabolites were chemically derivatized before analysis using gas chromatography–tandem mass spectrometry (GC–MS–MS). The separation was performed on a HP-5MS capillary column (30 m × 0.25 mm × 0.25 µm) with temperature programming. The detection was performed under electro-spray ionization (ESI) in multiple reaction monitoring (MRM) mode. An internal standard method was used. The extraction solvent, types of SPE cartridges and eluents were optimized by comparing the sample recoveries under different conditions. The results showed that the calibration curves of the five organophosphorus pesticides metabolites were linear in the range of 0.2–200 μg/L (r² ≥ 0.992) and that of the three pyrethroid pesticides metabolites were linear in the range of 0.025–250 μg/L (r² ≥ 0.991). The limits of detection (LODs, S/N ≥ 3) and the limits of quantification (LOQs, S/N ≥ 10) of the eight metabolites were 0.008–0.833 μg/L and 0.25–2.5 μg/L, respectively. The recoveries of the eight metabolites ranged from 54.08% to 82.49%. This efficient, stable, and cost-effective method is adequate to handle the large number of samples required for surveying the exposure level of organophosphorus and pyrethroid pesticides in the general population.     

Monitoring of organic pollutants in marine environment by semipermeable membrane devices and mussels: accumulation and biochemical responses

This study involves the monitoring of organic pollutants using transplanted mussels (Mytilus galloprovincialis) as bioindicator organisms and semipermeable membrane devices (SPMDs) as passive samplers. Mussels and SPMDs were deployed to marinas, shipyards and shipbreaking yards on the coastal area of Turkey and retrieved after 60 days. Polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB) and organochlorine pesticide (OCP) compounds were analysed with high-resolution GC-MS. Total PAH concentrations in SPMDs and mussels ranged from 200 to 4740 ng g sampler^?1 and from 7.0 to 1130 ng g^?1 in wet weight (ww). PCB and OCP concentrations in SPMDs changed between 0.04–200 and 4.0–26 ng g sampler^?1, respectively. The highest PCB (190 ng g^?1 ww) and OCP (200 ng g^?1 ww) concentrations in mussels were measured at shipyard stations. A strong correlation was observed between the PAH and PCB concentrations in SPMDs and mussels. Enzyme assays (acetylcholinesterase, ethoxyresorufin-O-deethylase, glutathione S-transferase, glutathion reductase and carboxylesterase activities) were performed as biomarkers to reveal the effects of pollution on the mussels. There was no clear relationship found between the enzyme levels and the pollutant concentrations in mussels. Integrated biomarker responses were calculated to interpret the overall effect of pollutants.

     

Novel hybrid composite discharge electrode for electrostatic precipitator

Over the last few decades, electrostatic precipitators (ESPs) have emerged as effective air pollution control devices for treating coal-fired power plant exhausts. Among the components of the ESP, the discharge electrodes are extremely important in determining the collection efficiency of the ESP. Typically, in wet ESPs, the discharge electrodes used must be made of corrosion-resistant alloys, which makes them extremely expensive and heavy. Hybrid composite discharge electrodes have the potential to be lightweight and corrosion-resistant substitute for traditional metal alloy electrodes used in wet ESPs. In this experimental study, a novel hybrid composite electrode (recently patented at Ohio University) is presented as a substitute for traditional metal electrodes in wet ESPs. The samples of hybrid electrodes were fabricated by using carbon fiber composites, combined with metal mesh, in the shape of a long and thin tape. The electrode’s electrical response was evaluated in open atmospheric conditions, while connected to a transformer-rectifier unit to generate a corona current at voltages exceeding 50 kV. Results of these hybrid electrodes were compared with traditional metal electrodes. The hybrid composite discharge electrode produced a uniform corona at comparable power levels to that of metal electrodes, with additional advantages of being compact, lightweight, and highly corrosion resistant. In addition, hybrid composite electrodes exhibited lower corona onset voltage as compared with metal electrodes. The preliminary experimental data are encouraging and show significant potential for this new inexpensive hybrid electrode to replace metal electrodes in wet ESPs, providing comparable (and in some cases exceeding) collection efficiencies with lower ozone generation.

Implications: The newly invented hybrid composite electrode (HCE) performance was evaluated through experimentation with conventional metal electrodes. The HCE performance was comparable to the metal electrodes. The HCE also exhibited uniform corona fields and steady power while maintaining similar and in some cases superior electrical performance as compared with metal electrodes and thus shows a significant potential to substitute metal electrodes in wet ESP systems.     

Recovery of rare-earth elements from neodymium magnets using molten salt electrolysis

Rare-earth elements are used in neodymium magnets, and these elements are critical to Japanese industry. In this study, we focused on the electrochemical behavior of neodymium magnets for the recovery of rare-earth elements using molten salt electrolysis. The influence of the rare-earth elemental composition of the neodymium magnets on their anodic polarization behavior and oxidation mechanism was studied. The use of potentiostatic electrolysis enabled selective leaching of rare-earth elements from neodymium magnets in the potential range from ?1.8 to ?0.8 V. The oxidation potential limits the oxidation stage, enabling rare-earth elements to be leached from mixed neodymium magnets simultaneously.