番龙眼木的热分解失重及动力学研究

木材热解是木材类火灾事件的先导过程,是引起后续的阴燃、着火、燃烧和火焰蔓延等各种现象的重要因素,因此研究木材的热解非常重要。采用热重分析法对番龙眼木的热重特性及反应动力学进行研究。在空气气氛下,研究样品粒径、试验气氛和升温速率对番龙眼木热解特性的影响。对番龙眼木的热解反应过程的分析,采用Flynn-Wall-Ozawa积分法、Kissinger最大速率法和atava-esták积分法对动力学进行处理。试验得到了一些热解动力学的参数,并推断出不同温升速率下番龙眼木的动力学最概然机理方程为反应级数函数,n=4     

洱海表层沉积物中总氮含量及氨氮的释放特征

通过现场调查和室内模拟试验,对洱海具有代表性的9个表层沉积物样品中w(TN)的分布特征以及沉积物中NH₄+-N释放动力学特征进行了研究. 结果表明,洱海表层沉积物中w(TN)在2.0844～6.5153g/kg之间,平均值为3.5378g/kg,北部西岸为高值区,南部(靠近大理市)为次高值区. 一级动力学模型可很好地拟合洱海表层沉积物NH₄+-N释放动力学特征,NH₄+-N最大释放量在0.1209～0.2810g/kg之间;释放主要集中在0~5min内,约占最大释放量的68%~83%;随后释放速率逐渐放缓,到120min后基本达到释放平衡.运用无限稀释法对沉积物NH₄+-N释放潜能进行测定表明,洱海沉积物NH₄+-N释放潜能在1.7001~3.5879 g/kg之间,在水土质量比约为2500时,NH₄+-N释放量达到最大,随后释放逐渐趋于平衡. 洱海沉积物NH₄+-N释放潜能及最大释放量均与其w(TN)呈显著正相关. 洱海沉积物中w(TN)与NH₄+-N释放潜能和最大释放量均高于长江中下游湖泊,具有较大的氮释放风险.      

我国废旧电冰箱聚氨酯泡沫塑料管理现状及对策研究

随着科技进步和电冰箱产品更新换代速度的加快,报废弃电冰箱数量不断增大.冰箱拆解处理产生的大量聚氨酯泡沫塑料,由于其中含有CFCs类发泡剂且其难以降解等,增加了处理难度,如何对其进行有效处理处置成为国内外广泛关注的焦点.目前我国废弃电冰箱聚氨酯泡沫塑料一般送至生活垃圾处理厂进行焚烧或填埋处置,而未进行资源化利用.在调研电冰箱聚氨酯泡沫塑料国内外现有处理处置技术基础上,比较了热能回收法、物理法、化学法、生物法和热解法等处理技术的优缺点,并对其经济性和实用性进行分析.同时分析了我国废电冰箱聚氨酯泡沫塑料环境管理面临的主要问题,结合国家相关管理政策需求,提出了针对性建议.     

济南冬春季室内空气PM_(2.5)中多环芳烃污染特征及健康风险评价

2010年冬春季,在济南典型室内环境(超市、办公室和餐厅)采集了PM2.5样品,并对其多环芳烃(PAHs)进行了分析.结果表明,采样期间办公室的PAHs平均浓度最高,为93.11 ng.m-3,超市和餐厅的PAHs平均浓度分别为42.97 ng.m-3和26.65 ng.m-3.超市和办公室的多环芳烃均以室外源(燃煤)为主,吸烟导致办公室轻环多环芳烃浓度升高,高于室外相应物种的浓度,餐厅的轻环多环芳烃和重环多环芳烃分别来源于室内烹饪和室外的机动车尾气.与室外相比,超市和办公室PAHs中的菲(Phe)和苯并[b+k]荧蒽(BbkF)占总PAHs的比例较高,达到10%—15%,这与冬季室内使用中央空调取暖密不可分.超市、办公室和餐厅的毒性当量浓度值(BEQ)分别为7.05 ng.m-3、10.75 ng.m-3和0.75 ng.m-3.其中办公室的毒性当量浓度高于我国规定10 ng.m-3.超市,办公室和餐厅的PAHs暴露致终身肺癌风险度分别为0.6×10-3、0.9×10-3和6.5×10-5,均超过了世界卫生组织的建议值(10-5),超市和办公室的终身致癌健康风险高于美国最高法院规定的10-3的显著水平,说明生活在超市和办公室致癌风险高.     

Preliminary Evaluation of the Use of Phosphogypsum for Reef Substrate. I. A Laboratory Study of Bioaccumulation of Radium and Six Heavy Metals in an Aquatic Food Chain

Phosphogypsum (PG), a solid by-product of phosphoric acid production, contains radionuclides and trace metals in concentrations which may pose a potential hazard to human health and the environment. to investigate the possibility of bioaccumulation of radium and six heavy metals over time when aquatic organisms experience both trophic and environmental exposure to PG, we designed a laboratory experiment representing three levels of an aquatic food chain. During the 135 day experiment, a meiobenthic copepod species (Amphiascoides atopus) was cultured in the presence of PG. the copepods were subsequently fed to grass shrimp (Palaemonetes vulgaris and P. pugio) which were in turn fed to gulf killifish (Fundulus grandis); both the grass shrimp and the killifish also experienced an environmental PG exposure. Other than elevated radium levels in the experimental grass shrimp, the experiment demonstrated little effect of environmental or trophic exposure to PG on microinvertebrates, macroinvertebrates, or fishes that could be attributed to PG. in all cases where increased concentrations were indicated within the experimental group, roughly equivalent increases in metal concentrations also occurred in the control group.     

Methodology for an urban ecological footprint to evaluate sustainable development in China

The ecological footprint (EF) is a method for measuring sustainable development through ecological impact. A methodology is presented for predicting urban ecological footprints. Urban energy use and natural resource consumption were analyzed to calculate an EF based on land type (arable, pasture, forest, fossil energy land, built-up area and water area) and consumption (food, housing, transportation, goods, services and waste). The result was then compared with the local ecological carrying capacity to develop criteria for sustainable ecological footprints. Case studies of four cities in China (Guangzhou, Ningbo, Suzhou and Yangzhou) illustrate the urban EF approach. The time series of EF in a case study of Guangzhou for 1991–2001 was analyzed and the consumption–land-use matrix of urban EF was established. The results show that the cities are ecologically unsustainable, with average ecological conflicts per capita of more than 2 ha. The urban EF method is useful to measure urban sustainable development and provides policy proposals for decision-making. However, the EF method still has limitations and weaknesses.     

Multi-index integrated assessment and analysis of town-sewage treatment priorities in China

Water quality is one of the most serious problems of environment and national sustainable development strategy now facing China. After hard work over the last several decades, urban-sewage treatment in China is now relatively well developed. It now affords mainly higher levels of sewage collection and treatment, as well as pollution-load control. The characteristic rapid urbanization now occurring in China is still increasing and developing dramatically, and involves large numbers of people. However, in towns, sewage treatment infrastructure is inadequate, and a high percentage of the sewage generated there is not effectively collected and treated. The sewage and pollution load of such towns have become the most important reason for environmental water problems in China. To understand the priorities of sewage treatment in such towns, and their spatial distribution in China, we conducted two nationwide investigations of water use and sewage discharge in towns. Based on the integrated analytic hierarchy process (AHP), assessment indices and a framework of town-sewage treatment priorities in China were constructed. Then, we assessed and analyzed the priorities of towns regarding three aspects of sewage treatment: environmental stress, economic capability, and infrastructure. The results showed that the southeast coastal areas and north China had higher demand for sewage treatment than other areas. The demand in eastern and western areas had obvious differences in spatial distribution, but had nearly no differences within those areas. The towns having the greatest demand for high-priority sewage treatment were concentrated in regions with high economic capability and intense water resource utilization.     

城市污水处理厂微生物气溶胶污染和粒径分布特征

城市污水处理厂微生物气溶胶的污染与控制逐渐成为人们关注的热点问题。为明确城市污水处理厂微生物气溶胶浓度和粒径分布特征,选择鄂尔多斯市某城市污水处理厂的格栅间、配水池、氧化沟、二沉池、污泥脱水间和厂区门口6个功能区为对象,对各功能区产生的异养细菌、真菌和放线菌气溶胶浓度分布、污染特性和微生物粒子粒径分布特性进行研究。结果表明,该污水处理厂不同功能区内异养细菌、真菌和放线菌的浓度分布存在显著性差异,其中二沉池和污泥脱水间产生的异养细菌和放线菌浓度均较高,真菌浓度较高的区域为厂门口和二沉池;根据相关微生物气溶胶污染评价标准,污泥脱水间逸散的异养细菌浓度均达到污染级,二沉池、氧化沟和厂门口逸散的异养细菌浓度达轻微污染级,格栅间和配水池未受污染,而真菌浓度在各个功能区均未受到污染;各功能区产生的异养细菌、真菌和放线菌粒子粒径分布无明显差异,异养细菌、真菌和放线菌粒子粒径分别集中在第1、4级,第3、4级和第1、2、3级,大体上均呈正态分布;各功能区均逸散出一定比例的可以直接吸入人体呼吸道的微生物粒子,可能对人体健康具有一定的潜在风险。研究结果可为城市污水处理厂运行过程中微生物气溶胶的污染控制提供科学依据。     

胶东站换相失败引起的银川东换流站扰动分析

针对2012年4月22日胶东站换相失败问题。通过对直流系统建模,并将换相失败过程的系统参数代入模型中进行了分析和计算,提出预防逆变站换相失败的措施。分析结果表明:逆变站发生换相失败故障,将导致银川东换流站直流电流增大,直流输电输送功率减少,并对整流侧交流系统产生干扰。     

利用果胶培养基分离番茄根际细菌

采用平板稀释和PCR-DGGE相结合的方法,比较了4种培养基(果胶富营养培养基PM,只含果胶一种营养的培养基PA,添加果胶的寡营养培养基YPP以及与YPP营养成分一致但不添加果胶的寡营养培养基YPG)分离番茄根际细菌的能力.结果显示:PA培养基能够分离到42种形态的细菌;YPP培养基可以分离到最高的细菌菌落数,分离获得的种类比PA少;YPP培养基分离获得细菌的种类和菌落数量比YPG培养基要多.聚类分析也显示只有果胶一种营养的PA培养基能分离到最多种类,分离获得的菌群与自然环境中微生物群落最相似.研究结果表明添加番茄根际主要分泌物——果胶到培养基中可以提高培养基分离细菌的能力.