流化床污泥干燥器床料的颗粒度对流化情况的影响

以上海白龙港污水处理厂流化床污泥干燥系统为研究对象,针对流化床污泥干燥器流化情况的好坏分析,在确定其它变量（流化风量、给料分配器转速、料层压差、运行负荷等）不变的情况下,对床料颗粒度的工艺参数进行研究实验,总结颗粒度的工艺参数对流化情况的运行变化规律,从而提高了流化床污泥干燥系统的稳定性、连续性和高效性。     

中性点不接地电网中单相接地故障的分析及处理

阐述了中性点不接地电网中单相接地的特点,并分析了用绝缘监视装置和小电流接地选线装置查找故障的利弊,以及目前小电流接地选线技术可靠性差的原因.     

石化行业渣油加氢装置环境监理要点研究——以某企业180万吨／年渣油加氢装置为例

生产清洁油品被列为中国“十二五”炼油工业发展的重点,其中“渣油加氢”是生产清洁油品的重要技术路线,也是环境监理关注的重点。以某石化公司油品质量升级改造项目为例,从“六监一管一协调”八个方面着手,结合项目的环评文件、批复文件、环保篇章、施工方案等,明确初步设计、施工期、试生产三个阶段的环境监理重点,对新建180万吨／年渣油加氢装置的环境监理开展深入研究,为国内深入开展类似项目的环境监理工作、出台环境监理技术规范提供有益的参考。     

基于HEART方法的管制员调配飞行冲突的人为差错概率研究

空中交通管制员的核心任务之一是调配飞行冲突,故有必要对管制员调配飞行冲突的可靠性进行分析与评估.本文首次将HEART方法应用于管制员调配飞行冲突的人为差错概率分析,并根据相关人因可靠性分析方法对HEART中的任务分类和差错诱发条件进行了改进,从而提高了该方法在空中交通领域的适用性.改进后的HEART方法能对管制员调配飞行冲突的人为差错概率进行定量分析,并可发现起负面作用的差错诱发条件,可为管理部门有针对性地制定改进措施提供技术支持,对保障空中交通安全有序地运行具有重要的意义.     

污水土地处理系统重塑土渗透性及混合比的确定方法

污水土地处理系统的渗透性是能否实现污水处理设计要求的关键。本文采用地下水数值模拟方法刻画了污水土地处理系统复杂的结构和边界条件,准确地得到了能够满足污水处理设计要求的污水土地处理系统的渗透系数,并通过不同砂-土混合比例的重塑土渗透试验,研究了能够满足污水处理设计要求的重塑土的砂-土混合比,以为充分利用原场地黏土资源提供依据,也为类似研究和设计提供新的思路和方法。     

白音华一号露天矿工程环境监理的实践与探讨

白音华一号露天矿工程施工建设过程中,将会造成大气污染、地表水污染、地下水疏干、噪声污染、排土场及工业场地占地等大量生态环境问题。因此,在工程施工之初开展环境监理工作,对加强环境保护“三同时”制度,落实污染物防治及生态保护措施具有十分重要的意义。     

Supercritical water oxidation of polyvinyl alcohol and desizing wastewater：Influence of NaOH on the organic decomposition

Polyvinyl alcohol is a refractory compound widely used in industry. Here we report supercritical water oxidation of polyvinyl alcohol solution and desizing wastewater with and without sodium hydroxide addition. However, it is difficult to implement complete degradation of organics even though polyvinyl alcohol can readily crack under supercritical water treatment. Sodium hydroxide had a significant catalytic effect during the supercritical water oxidation of polyvinyl alcohol. It appears that the OH ion participated in the C-C bond cleavage of polyvinyl alcohol molecules, the CO2-capture reaction and the neutralization of intermediate organic acids, promoting the overall reactions moving in the forward direction. Acetaldehyde was a typical intermediate product during reaction. For supercritical water oxidation of desizing wastewater, a high destruction rate (98.25%) based on total organic carbon was achieved. In addition, cases where initial wastewater was alkaline were favorable for supercritical water oxidation treatment, but salt precipitation and blockage issues arising during the process need to be taken into account seriously.     

Photocatalytic degradation of carbofuran in TiO2 aqueous solution：Kinetics using design of experiments and mechanism by HPLC/MS/MS

The photocatalytic degradation kinetics of carbofuran was optimized by central composite design based on response surface methodology for the first time. Three variables, TiO2 concentration, initial pH value and the concentration of carbofuran, were selected to determine the dependence of degradation efficiencies on independent variables. Response surface methodology modeling results indicated that the degradation efficiency of carbofuran was highly affected by the initial pH value and the concentration of carbofuran. Then nine degradation intermediates were detected by HPLC/MS/MS. The Frontier Electron Densities of carbofuran were calculated to predict the active sites on carbofuran attacked by hydroxyl radicals and photoholes. Point charges were used to elucidate the chemisorption pattern on TiO2 catalysts during the photocatalytic process. By combining the experimental results and calculation data, the photocatalytic degradation pathways of carbofuran were proposed, including the addition of hydroxyl radicals and the cleavage of the carbamate side chain.     

基于国内实测燃煤电厂烟气汞排放估算的不确定度

参照测量不确定度评定与表示的国家技术规范,基于近年来我国燃煤电厂常规污控设备协同脱汞的现场测试数据(文献报道和实测值)及各省原煤w(汞)的实测值,初步构建了国内燃煤电厂烟气汞排放不确定度的计算方法,并以2010年的燃煤量、污控方式布局为基础,计算了该年度汞排放的不确定度. 结果表明:2010年我国燃煤电厂烟气汞排放的总不确定度为48.8t,占平均排放总量的34.3%;其中60.2%源于污控设备脱汞效率的不确定度,39.8%源于原煤w(汞)的不确定度;采用ESP(静电除尘)、ESP+WFGD(静电除尘+湿法脱硫)、SCR+ESP+WFGD(选择性催化还原脱硝+静电除尘+湿法脱硫)和FF(袋式除尘)大气污控组合的机组各存在6.0、32.2、9.7和0.9t的烟气汞排放不确定度,分别占各对应机组烟气汞排放量的19.3%、32.8%、84.6%和53.6%,其中SCR+ESP+WFGD污控组合烟气汞排放的相对不确定度最大. 随着我国烟气脱硝工作全面推行,2015年以后,SCR+ESP+WFGD污控措施(组合)的机组所占比例将会提高到66%以上,如果仍以现有数据为基础,则来自SCR+ESP+WFGD污控措施(组合)机组的烟气汞排放不确定度将会大幅增加,因此急需增加对该类装置脱汞效率的实测样本数量.      

珠江三角洲印刷行业VOCs组分排放清单及关键活性组分

根据珠江三角洲地区印刷行业活动数据和不锈钢罐采样-气质联用技术,获取了印刷工艺VOCs成分谱,建立了该地区2010年印刷行业VOCs组分排放清单,研究了不同工艺排放的臭氧生成潜势. 结果表明:该地区2010年印刷行业VOCs排放总量达8591.26t,深圳、东莞、佛山排放量较大.凹印是印刷行业主要VOCs排放工艺,排放量达5762.01t;平印和凸印次之,分别为1954.01和37.82t.不同工艺排放的VOCs组分差异较大,平印工艺排放的VOCs成分中异丙醇含量最多(306.58t),其次为正庚烷(115.87t);苯和甲苯是凸印工艺排放的VOCs成分中含量最大的2种化合物,分别达5.58和4.83t;乙酸乙酯是凹印工艺排放的VOCs成分中的首要化合物,达2482.85t.凸印工艺排放的VOCs单位浓度臭氧潜势最大,达1.30μg/m3,平印和凹印较小,分别为0.89和0.72μg/m3,各工艺排放的含氧有机物对臭氧生成潜势的贡献均为最大.