旋风除尘器静动态强度分析

对旋风除尘器在静态载荷下的强度进行了分析,发现头部顶板是较薄弱部件。通过动态载荷系数（ＤＬＦ）方法,研究了旋风除尘器承受动态粉尘爆炸压力载荷时提高使用强度的可能性,结果表明,一般情况下,由于载荷的动态特性导致设备强度的变化可以忽略。     

粉料无尘装车机工作原理及其在冶金厂矿的应用

介绍集装车与防尘统一于一体的无尘装车技术及具有设备本质安全化特点的无尘装车机在解决粉状物料装车作业时的扬尘问题,保护作业工人健康,维护厂区环境方面的重要优越性。     

Thermal and Mechanical Properties of Polyurethane Rigid Foam Based on Epoxidized Soybean Oil

A soypolyol based on epoxidized soybean oil (ESO) was prepared in the presence of HBF₄ and diethanolamine (DEA) was used as ring opener. A series of polyurethane rigid foam were prepared by mixing polyol with TDI using an isocyanate index of 1.1. The polyol used in this paper were a mixture of soypolyol and a commercial PL-5601 polyester polyol and the mass fraction of PL-5601 was in the range of 0–60%. The thermal properties of the resins were characterized by DSC and TG. The results showed that these rigid foams possess high thermal stability. There were two glass transition temperature of each foam and Tg₁ was increasing with the increasing of OH value. The compression strength of the foam was also recorded, and the effect of mass ratio of soypolyol and PL-5601 polyester polyol on the compression strength was discussed.     

构建“水-煤-碳”体系 优化煤化工发展

分析了煤化工行业发展的现状及趋势,提出我国现代煤化工发展瓶颈主要是产业发展存在技术风险、产业发展与资源环境的矛盾突出及面临碳减排压力,并提出通过合理构建"水-煤-碳"三大约束指标体系,引导煤化工实现有序发展。     

钛基IrO2-RuO2阳极电解处理亚甲基蓝溶液

采用钛基IrO2-RuO2为阳极材料,不锈钢为阴极材料,NaCl质量浓度为10 g/L的溶液为电解液,对亚甲基蓝溶液进行电化学处理。实验结果表明:处理初始质量浓度为25 mg/L的亚甲基蓝溶液,电解电流0.050 A,电解20 min后亚甲基蓝去除率达95%;处理初始质量浓度为100 mg/L的亚甲基蓝溶液,电解电流0.100 A,电解30 min后亚甲基蓝去除率达98%。随着电解时间和电解电流的增加,亚甲基蓝去除率均增大。     

大孔树脂吸附—Fenton试剂氧化法预处理含邻苯二甲酸二异丁酯废水

采用大孔树脂吸附—Fenton试剂氧化法预处理含邻苯二甲酸二异丁酯(DIBP)废水。大孔树脂吸附工段的最佳实验条件为:以树脂NDA88为吸附剂,废水pH为2。NDA88经过10批次的连续使用,COD去除率基本稳定在58%左右,脱附率可达96%以上,吸附后废水COD为12 000 mg/L左右。Fenton试剂氧化工段的最佳实验条件为:H2O2加入量70 mL/L,n(H2O2):n(Fe2+)=4,废水pH 4。在此最佳条件下进行实验,Fenton试剂氧化工段COD去除率达65%,处理后废水COD为4 200 mg/L。     

Molding Method, Thermal and Mechanical Properties of Jute/PLA Injection Molding

Natural composites have been important materials system due to preservation of earth environments. Natural fibers such as jute, hemp, bagasse and so on are very good candidate of natural composites as reinforcements. On the other hand regarding matrix parts thermosetting polymer and thermoplastic polymer deriver form petrochemical products are not environmental friendly material, even if thermoplastic polymer can be recycled. In order to create fully environmental friendly material (FEFM) biodegradable polymer which can be deriver from natural resources is needed. Therefore poly(lactic acid) (PLA) polymer is very good material for the FEFM. In this paper jute fiber filled PLA resin (jute/PLA) composites was fabricated by injection moldings and mechanical properties were measured. It is believable that industries will have much attention to FEFM, so that injection molding was adopted to fabricate the composites. Long fiber pellet fabricated by pultrusion technique was adopted to prepare jute/PLA pellet. Because it is able to fabricate composite pellets with relative long length fibers for injection molding process, where, jute yarns were continuously pulled and coated with PLA resin. Here two kinds of PLA materials were used including the one with mold releasing agent and the other without it. After pass through a heated die whereby PLA resin impregnates into the jute yarns and sufficient cooling, the impregnated jute yarns were cut into pellets. Then jute/PLA pellets were fed into injection machine to make dumbbell shape specimens. In current study, the effects of temperature of PLA melting temperature i.e. impregnation temperature and the kinds of PLA were focused to get optimum molding condition. The volume fractions of jute fiber in pellet were measured by several measuring method including image analyzing, density measurement and dissolution methods. Additionally, thermal and mechanical properties were investigated. It is found that 250° is much suitable for jute/PLA long fiber pultrusion process because of its less heat degradation of jute, better impregnation, acceptable mechanical property and higher production efficiency. Additionally the jute fibers seem much effective to increase deflection temperature under load, tensile modulus and Izod strength.     

响应面法优化阴阳极同时作用电化学法处理染料废水

在自制电化学反应器中,以甲基橙模拟染料废水为处理对象,采用Box-Behnken Design响应面法研究了影响阴阳极同时作用电化学法处理染料废水的因素及其交互作用。实验得出各因素对废水脱色率影响的大小顺序为：电流密度> Fe³⁺浓度>Cl^-浓度。各因素之间的交互作用对废水脱色率影响的大小顺序为：电流密度和Fe³⁺浓度>电流密度和Cl^-浓度>Fe³⁺浓度和Cl^-浓度。优化结果表明：Fe³⁺浓度为1.02 mmol/L、Cl^-浓度为10.96 mmol/L、电流密度为11.52 mA/cm²时,最佳脱色率为94.67%。阴阳极同时作用电化学法对甲基橙去除效果显著。     

含油污泥处理方法探讨

概述了国家环保部门对含油污泥危害性及其监管工作的相关规定,分析了原油开采和加工过程中产生的含油污泥的组成,介绍了沉降浓缩和机械脱水等含油污泥预脱水技术的处理效果,阐述了浮渣焦化处理工艺、含油污泥热萃取处理技术和烟道气作为热源的剩余活性污泥干燥技术的工艺流程、处理效果及存在的问题.     

好氧颗粒污泥技术处理味精废水

采用好氧颗粒污泥技术处理味精废水.实验结果表明:前置缺氧段对反应器脱氮效果影响较小,脱氮过程主要是在好氧段实现;曝气段的最佳工艺条件为曝气量0.38 m3/h,曝气时间5.5 h;在进水COD、p(NH3-N)和TN分别为l000.00～1300.00,70.00～130.00,100.00～200.00 mg/L的条件下,COD、NH3-N和TN的去除率可分别维持在90％、99％和85％以上,实现了味精废水的高效脱氮处理.有机物主要在曝气初期的1.5 h内被去除,其在微生物体内以聚β-羟基丁酸形式储存,以提供反硝化过程中所需要的碳源.与普通SBR相比,接种好氧颗粒污泥后的反应器对味精废水具有更好的处理效果.