美国市政污水处理排放标准制定对中国的启示

在概述美国市政污水处理排放标准制度体系的基础上,介绍了其制定基于技术的排放限值和基于水质的排放限值的方法,阐述了其制定的科学性,并指出了中国市政污水处理排放标准中存在的相应问题。最后,根据美国制定排放标准限值的经验,对我国污水处理排放标准进行了思考,并提出了科学制定排放标准的方法和建议。     

Contribution of precursor compounds to the release of per- and polyfluoroalkyl substances (PFASs) from waste water treatment plants (WWTPs)

Per-and polyfluoroalkyl substances(PFASs) are ubiquitous in sludge and water from waste water treatment plants, as a result of their incorporation in everyday products and industrial processes. In this study, we measured several classes of persistent PFASs,precursors, transformation intermediates, and newly identified PFASs in influent and effluent sewage water and sludge from three municipal waste water treatment plants in Sweden, sampled in 2015. For sludge, samples from 2012 and 2014 were analyzed as well.Levels of precursors in sludge exceeded those of perfluoroalkyl acids and sulfonic acids(PFCAs and PFSAs), in 2015 the sum of polyfluoroalkyl phosphoric acid esters(PAPs) were 15–20 ng/g dry weight, the sum of fluorotelomer sulfonic acids(FTSAs) was 0.8–1.3 ng/g,and the sum of perfluorooctane sulfonamides and ethanols ranged from non-detected to 3.2 ng/g. Persistent PFSAs and PFCAs were detected at 1.9–3.9 ng/g and 2.4–7.3 ng/g dry weight, respectively. The influence of precursor compounds was further demonstrated by an observed substantial increase for a majority of the persistent PFCAs and PFSAs in water after waste water treatment. Perfluorohexanoic acid(PFHxA), perfluorooctanoic acid(PFOA), perfluorohexane sulfonic acid(PFHxS), and perfluorooctane sulfonic acid(PFOS)had a net mass increase in all WWTPs, with mean values of 83%, 28%, 37% and 58%,respectively. The load of precursors and intermediates in influent water and sludge combined with net mass increase support the hypothesis that degradation of precursor compounds is a significant contributor to PFAS contamination in the environment.     

Effects of free ammonia on volatile fatty acid accumulation and process performance in the anaerobic digestion of two typical bio-wastes

The effect of free ammonia on volatile fatty acid(VFA)accumulation and process instability was studied using a lab-scale anaerobic digester fed by two typical bio-wastes:fruit and vegetable waste(FVW)and food waste(FW)at 35°C with an organic loading rate(OLR)of 3.0 kg VS/(m~3·day). The inhibitory effects of free ammonia on methanogenesis were observed due to the low C/N ratio of each substrate(15.6 and 17.2,respectively). A high concentration of free ammonia inhibited methanogenesis resulting in the accumulation of VFAs and a low methane yield. In the inhibited state,acetate accumulated more quickly than propionate and was the main type of accumulated VFA. The co-accumulation of ammonia and VFAs led to an "inhibited steady state" and the ammonia was the main inhibitory substance that triggered the process perturbation. By statistical significance test and VFA fluctuation ratio analysis,the free ammonia inhibition threshold was identified as 45 mg/L. Moreover,propionate,iso-butyrate and valerate were determined to be the three most sensitive VFA parameters that were subject to ammonia inhibition.     

Quantifying public health benefits of environmental strategy of PM2.5 air quality management in Beijing–Tianjin–Hebei region, China

In 2013,China issued "Air Pollution Prevention and Control Action Plan(Action Plan)" to improve air quality.To assess the benefits of this program in Beijing-Tianjin-Hebei(BTH)region,where the density of population and emissions vary greatly,we simulated the air quality benefit based on Ben MAP to satisfy the Action Plan.In this study,we estimate PM_(2.5) concentration using Voronoi spatial interpolation method on a grid with a spatial resolution of 1 × 1 km~2.Combined with the exposure-response function between PM_(2.5) concentration and health endpoints,health effects of PM_(2.5) exposure are analyzed.The economic loss is assessed by using the willingness to pay(WTP) method and human capital(HC) method.When the PM_(2.5) concentration falls by 25% in BTH and reached 60 μg/m~3 in Beijing,the avoiding deaths will be in the range of 3175 to 14051 based on different functions each year.Of the estimated mortality attributable to all causes,3117 annual deaths were due to lung cancer,1924 – 6318 annual deaths were due to cardiovascular,and343 – 1697 annual deaths were due to respiratory.Based on WTP,the estimated monetary values for the avoided cases of all cause mortality,cardiovascular mortality,respiratory mortality and lung cancer ranged from 1110 to 29632,673 to 13325,120 to 3579,1091 to 6574 million yuan,respectively.Based on HC,the corresponding values for the avoided cases of these four mortalities were 267 to 1178,161 to 529,29 to 143 and 261 million yuan,respectively.     

In-situ synthesis of TiO2 rutile/anatase heterostructure by DC magnetron sputtering at room temperature and thickness effect of outermost rutile layer on photocatalysis

TiO_2 rutile/anatase heterostructure thin films with varying rutile thickness have been in-situ synthesized via DC magnetron sputtering with Ar gas at room temperature. The crystal texture, surface morphology, energy gap and optical properties of the films have been investigated by X-ray diffraction meter, grazing incidence X-ray diffraction meter, Raman spectroscopy, scanning electron microscopy, and UV–visible spectrophotometer, which indicates that the rutile/anatase heterostructure films are successfully fabricated. The further degradation experiments display that the photocatalytic activity can be dramatically affected by the thickness of the outmost rutile layer and the 100 nm thickness exhibits the best performance in all of the TiO_2 thin films. With the increase of the outmost rutile layer, the optical band gap of TiO_2 film displays a systematic decrease slightly. However,the change in photocatalytic activity does not coincide with that in the band gap. The photoresponse and electrochemical properties of the thin films have been characterized to understand the mechanism of the varied photocatalytic activity.     

小型城市污水排放量预测模型研究——以楚雄市为例

针对小城市污水排放量历史数据较少,城市发展变化较大的特点,以楚雄市为例,提出了基于污水排放来源以及生成机理的预测方法。根据历史人口增长趋势以及城镇化率进行城区人口综合预测,运用定额法根据不同行业用水特点预测城市用水量,结合城市污水排放特点对楚雄市近期以及远期城市污水排放量进行科学合理的预测,并对预测结果进行了分析,可为城市发展规划提供决策参考。     

船用钢板材料在淡水环境中初期腐蚀行为

目的研究船用钢板材料在长江淡水环境中的初期腐蚀行为。方法运用形貌分析、腐蚀质量损失、XRD、开路电位、极化曲线等方法研究Q235B和CCSA两种船用钢板材料在室外长江淡水环境中不同暴露方式(水面大气、半浸、全浸)及不同浸泡时间(0.5,1 a)腐蚀行为;室内长江淡水环境不同暴露方式(半浸、全浸)浸泡768 h内的腐蚀行为;室内长江淡水环境全浸泡下在不同时间(0~14 d)的电化学腐蚀行为。结果两种船用钢板材料在武汉长江淡水中腐蚀严重,半浸泡环境下腐蚀速率最大,达到100μm/a,水面区大气腐蚀速率最小,腐蚀速率为30μm/a左右,全浸区腐蚀速率为80μm/a左右,1 a和0.5 a的腐蚀速率相近,CCSA耐蚀性优于Q235B。室内长江淡水浸泡环境下两种船用钢板材料腐蚀电位随时间而降低,2d后趋于稳定;半浸泡环境下腐蚀速率大于全浸区;极化曲线说明浸泡2 d后,腐蚀速率降低且趋于稳定。结论 CCSA耐蚀性优于Q235B,半浸泡环境下腐蚀最严重,其次为全浸区,水面大气环境腐蚀最小。     

分光光度法测定总氮的准确度研究

采用碱性过硫酸钾消解紫外分光光度法测定水中总氮时常出现空白值偏高、样品平行性较差、实验准确度不高等现象.为此,从总氮的测定过程出发,探讨了影响总氮测定的主要因素,有利于提高水质总氮测定的准确度.结果表明,分析试剂纯度、实验用水水质、器皿的清洗程度等对总氮的测定均有一定影响,适当延长消解时间与提高消解温度也有利于降低总氮的空白值.因此可通过优化各实验条件来提高实验的准确性,以保证实验室的设备仪器、检测人员和环境等条件满足分析要求.     

大气中重金属污染现状及来源研究

总结了近年来的研究成果,通过文献调研对中国大气中重金属污染现状、大气中重金属来源和重金属在环境中的迁移转化途径进行综述,提出为缓解重金属污染的高发态势,保护人群健康,应建立完善的环境污染防治体系,强化大气污染源颗粒物控制来减少重金属在大气环境中的暴露浓度,切断重金属在环境中的污染途径以减少大气传输和沉降,降低由大气-土壤-动植物-人体的重金属暴露健康风险.     

环境规划实施评估指标体系研究

环境规划指标体系是环境规划的核心内容,具有重要意义.环境规划能否切实发挥重要功能,与其规划实施评估有着密不可分的关系.环境规划评估指标体系的建立有利于系统有效地分析和评估环境规划实施效果和问题.通过分析定性评估、定量评估、层次分析法、逻辑框架法等评估方法,并实证分析环境规划评估指标体系的建立,对比分析发现,逻辑框架法可有效地分析环境规划实施过程中存在的问题,从而从总体上构建评估指标体系,可为环境规划的实施评估提供有效的参考.