中华圆田螺对沉积物中十溴联苯醚工业品DE-83的生物积累与转化

为研究沉积物中十溴联苯醚(BDE-209)的生物有效性,将淡水生态系统中常见的底栖动物中华圆田螺(Cipangopaludina cahayensis)暴露于商品DE-83(主要包含92%的BDE-209、6%的BDE-206、1.5%的BDE-207和0.5%的BDE-208)染毒的沉积物,进行60 d养殖实验。根据暴露期间中华圆田螺体内PBDEs含量与同系物组成的变化,探讨了田螺对DE-83的富集动力学、积累常数以及可能发生的生物转化。实验结果显示,DE-83主要同系物均能够被中华圆田螺积累,但是生物有效性非常低,BDE-209、BDE-207和BDE-206的吸收速率常数(k_s)为0.029～0.042 d^-1,BDE-207 > BDE-206 > BDE-209。依据动力学参数推算的生物-沉积物积累因子(BSAF)非常低,分别为0.05(BDE-209)和0.02(BDE-206和BDE-207)。暴露20 d后,中华圆田螺体内有低溴代同系物检出,其含量随暴露时间延长而增加,说明BDE-209在中华圆田螺体内发生了生物转化。     

Removal of sulfadiazine from aqueous solution on kaolinite

The adsorption of sulfadiazine onto kaolinite clay as an alternative adsorbent was examined in aqueous solution, hnpacts of the contact time, pH, temperature, ionic strength and coexistent surfactants on the adsorption process were evaluated. The pH significantly influenced the adsorption process, with adsorption being promoted at lower pH due to the cation exchange mechanism. Decreasing ionic strength in the solution was favorable for adsorption, and the addition of cationic and anionic surfactants had negative effects on the adsorption capacity of sulfadiazine on kaolinite. Kinetic experiments showed that the adsorption followed the pseudo-second-order model. The equilibrium adsorption was well described by both Freundlich and Dubinin-Radushkevich （DR） models. According to the DR model, the adsorption mechanism was determined by cationic exchange and weak physical forces. The thermodynamic study showed that sulfadiazine adsorption onto kaolinite was a sponta- neous and endothermic reaction.     

Fermentative hydrogen production from beet sugar factory wastewater treatment in a continuous stirred tank reactor using anaerobic mixed consortia

A low pH, ethanol-type fermentation process was evaluated for wastewater treatment and bio-hydrogen production from acidic beet sugar factory wastewater in a continuous stirred tank reactor (CSTR) with an effective volume of 9.6 L by anaerobic mixed cultures in this present study. After inoculating with aerobic activated sludge and operating at organic loading rate (OLR) of 12 kgCOD?m^-3·d^-1, HRT of 8h, and temperature of 35°C for 28 days, the CSTR achieved stable ethanol-type fermentation. When OLR was further increased to 18 kgCOD?m^-3·d^-1 on the 53rd day, ethanol-type fermentation dominant microflora was enhanced. The liquid fermentation products, including volatile fatty acids (VFAs) and ethanol, stabilized at 1493 mg·L^-1 in the bioreactor. Effluent pH, oxidation-reduction potential (ORP), and alkalinity ranged at 4.1–4.5, -250–(-290) mV, and 230–260 mgCaCO₃?L^-1. The specific hydrogen production rate of anaerobic activated sludge was 0.1 L?gMLVSS^-1·d^-1 and the COD removal efficiency was 45%. The experimental results showed that the CSTR system had good operation stability and microbial activity, which led to high substrate conversion rate and hydrogen production ability.     

Effect of pipes in heat pump system on electric vehicle energy saving

ABSTRACT

Refrigerant pressure drop and temperature change in pipes are normally ignored in the thermodynamic analysis of traditional vehicle air conditioning system, this will result in serious errors. In this Paper, pressure drop and temperature difference are simulated in different pipes of electric vehicle (EV) heat pump system to analysis the effects of pipes in the actual EV heat pump system. The results indicate that the greater the mass flow, the faster pressure drop increases, the temperature difference decreases. Pressure drop of saturated liquid refrigerant is smaller than that of saturated gas refrigerant at the same saturation pressure and mass flow rate. The higher the refrigerant pressure (no phase change), the slower pressure drop decreases, the faster the temperature difference decreases. Pressure drop decreases with the increment of bending angle of the pipe. For EV heat pump system, suitable valves and less branches are helpful for energy saving of the system. Shortening the pipe between compressor and condenser can reduce temperature change obviously. Pressure drop per unit length in the pipe between evaporator and compressor is large especially in heating mode because of lower refrigerant density. It even reaches to over 100 times of that in the pipe between condenser and throttle valve in heating mode and has negative effects on the performance of the system. If the evaporator is closer to the compressor and the number of branches is less, then pressure drop will decrease a lot, which will be advantageous for energy saving of the heat pump system.     

挥发性油藏回注气井控因素分析及措施

文章明确了挥发性油藏天然气回注井控的安全环保关键因素;量化了低渗挥发性油藏天然气回注注入能力,确定注入端各节点安全生产压力分布,攻关相关配套工艺设备,实现安全有效注入;开展室内实验和PVT相态拟合,分析注天然气后天然气和原油性质变化规律,创新非混相驱组分数值模拟参数优化方法,开展带人工压裂裂缝的组分数值模拟,精准确定压力场分布,降低计量及监测不准带来的安全隐患;明确注气井气窜影响因素,优化注采参数,抑制油井气窜,降低生产风险,实现井控安全情况下的天然气驱环保高效开发。     

Modelling hydraulic jump using the bubbly two-phase flow method

Hydraulic jumps have complex flow structures, characterised by strong turbulence and large air contents. It is difficult to numerically predict the flows. It is necessary to bolster the existing computer models to emphasise the gas phase in hydraulic jumps, and avoid the pitfall of treating the phenomenon as a single-phase water flow. This paper aims to improve predictions of hydraulic jumps as bubbly two-phase flow. We allow for airflow above the free surface and air mass entrained across it. We use the Reynolds-averaged Navier–Stokes equations to describe fluid motion, the volume of fluid method to track the interface, and the k–ε model for turbulence closure. A shear layer is shown to form between the bottom jet flow and the upper recirculation flow. The key to success in predicting the jet flow lies in formulating appropriate bottom boundary conditions. The majority of entrained air bubbles are advected downstream through the shear layer. Predictions of the recirculation region’s length and air volume fraction within the layer are validated by available measurements. The predictions show a linear growth of the shear layer. There is strong turbulence at the impingement, and the bulk of the turbulence kinetic energy is advected to the recirculation region via the shear layer. The predicted bottom-shear-stress distribution, with a peak value upstream of the toe of the jump and a decaying trend downstream, is realistic. This paper reveals a significant transient bottom shear stress associated with temporal fluctuations of mainly flow velocity in the jump. The prediction method discussed is useful for modelling hydraulic jumps and advancing the understanding of the complex flow phenomenon.     

Comparison of membrane fouling in ultrafiltration of down-flow and up-flow biological activated carbon effluents

The UF membrane fouling by down- and up-flow BAC effluents were compared. Up-flow BAC effluent fouled the membrane faster than down-flow BAC effluent. The combined effects dominated irreversible fouling. The extent of fouling exacerbated by inorganic particles was higher. The TMP, permeate flux, and normalized membrane flux during 21 days of UF of DBAC and UBAC effluents. Fouling during ultrafiltration of down- and up-flow biological activated carbon effluents was investigated to determine the roles of polysaccharides, proteins, and inorganic particles in ultrafiltration membrane fouling. During ultrafiltration of down- flow biological activated carbon effluent, the trans-membrane pressure was≤26 kPa and the permeate flux was steady at 46.7 L?m⁻²?h⁻¹. However, during ultrafiltration of up-flow biological activated carbon effluent, the highest trans-membrane pressure was almost 40 kPa and the permeate flux continuously decreased to 30 L?m⁻²?h⁻¹. At the end of the filtration period, the normalized membrane fluxes were 0.88 and 0.62 for down- and up-flow biological activated carbon effluents, respectively. The membrane removed the turbidity and polysaccharides content by 47.4% and 30.2% in down- flow biological activated effluent and 82.5% and 22.4% in up-flow biological activated carbon effluent, respectively, but retained few proteins. The retention of polysaccharides was higher on the membrane that filtered the down- flow biological activated effluent compared with that on the membrane that filtered the up-flow biological activated carbon effluent. The polysaccharides on the membranes fouled by up-flow biological activated carbon and down- flow biological activated effluents were spread continuously and clustered, respectively. These demonstrated that the up-flow biological activated carbon effluent fouled the membrane faster. Membrane fouling was associated with a portion of the polysaccharides (not the proteins) and inorganic particles in the feed water. When there was little difference in the polysaccharide concentrations between the feed waters, the fouling extent was exacerbated more by inorganic particles than by polysaccharides.     

Algal biomass derived biochar anode for efficient extracellular electron uptake from <Emphasis Type="Italic">Shewanella oneidensis</Emphasis> MR-1

The development of cost-effective and highly efficient anode materials for extracellular electron uptake is important to improve the electricity generation of bioelectrochemical systems. An effective approach to mitigate harmful algal bloom (HAB) is mechanical harvesting of algal biomass, thus subsequent processing for the collected algal biomass is desired. In this study, a low-cost biochar derived from algal biomass via pyrolysis was utilized as an anode material for efficient electron uptake. Electrochemical properties of the algal biochar and graphite plate electrodes were characterized in a bioelectrochemical system (BES). Compared with graphite plate electrode, the algal biochar electrode could effectively utilize both indirect and direct electron transfer pathways for current production, and showed stronger electrochemical response and better adsorption of redox mediators. The maximum current density of algal biochar anode was about 4.1 times higher than graphite plate anode in BES. This work provides an application potential for collected HAB to develop a cost-effective anode material for efficient extracellular electron uptake in BES and to achieve waste resource utilization.

Open image in new window

     

微囊藻毒素-LR对雄性黑斑蛙精巢中CYP46A1,CYP2H2和CYP2G1 mRNA表达的影响

微囊藻毒素-LR(microcystin-LR,MC-LR)是分布最广泛和毒性最强的一种微囊藻毒素,对水生动物造成潜在的健康威胁。大量科学研究证实,动物体中的细胞色素P450酶(CYP)参与内源性物质及外源毒性物质的代谢过程。为探究两栖动物生殖器官中的CYP酶对低剂量MC-LR生殖毒效应的调节作用,选择雄性黑斑蛙(Rana nigromaculata)为受试动物,采用静态置换法和体内暴露方法,分别暴露于0、0.1、1和10μg·L~(-1)MC-LR溶液0、7和14 d;用实时荧光定量PCR方法检测精巢中CYP46A1、CYP2H2和CYP2G1的mRNA表达水平。结果表明,暴露于0.1、1和10μg·L~(-1)MC-LR 14 d后,CYP46A1在mRNA水平分别上调了1.86、1.65和1.22倍,CYP2H2在mRNA水平分别上调了4.62、1.80和1.04倍,CYP2G1的mRNA水平分别上调了2.63、2.16和1.56倍。MC-LR在1μg·L~(-1)剂量下暴露7 d后,CYP46A1、CYP2H2和CYP2G1 mRNA水平均出现显著上调。上述研究表明,微囊藻毒素对黑斑蛙精巢3种CYP基因在mRNA水平上都存在低剂量刺激效应。低剂量MC-LR能诱导黑斑蛙精巢中CYP46A1转录水平变化,促进胆固醇转化为24S-羟化胆固醇,潜在破坏雄性黑斑蛙精巢中胆固醇水平的平衡; MC-LR也能够诱导精巢中CYP2H2和CYP2G1转录水平的变化,潜在调节CYP2H2和CYP2G1转录水平,进而影响MC-LR的代谢作用。     

氟离子慢性暴露对中国林蛙蝌蚪生长发育的毒性效应研究

氟元素以不同的结合形式广泛存在于自然界中,适量氟的摄取有益于龋齿预防和骨骼发育,然而过量氟的摄取会对动物及人体健康造成危害。近年来,大量的人类活动导致水环境中氟含量持续升高。为探究水域氟污染对中国林蛙的毒性影响,本研究以中国林蛙(Rana chensinensis)胚胎为试验材料,对卵黄栓期(G12期)胚胎进行了0、0.7、4.2、19.4、42.8 mg·L~(-1)F-慢性水体暴露直至胚胎发育到变态高峰期(G42期)的研究。分别于暴露25 d和40 d后取样测定了蝌蚪全长、体长、体重和发育分期;此外,分析了F-慢性暴露对变态率、G42期蝌蚪的全长、体长、体重和后肢长以及G42期蝌蚪骨骼发育的影响。结果表明:暴露25 d时,4.2 mg·L~(-1)F-处理组促进了林蛙蝌蚪的生长发育,而42.8 mg·L~(-1)F-处理组显著抑制了蝌蚪的生长发育;暴露40 d时,19.4 mg·L~(-1)F-和42.8 mg·L~(-1)F-处理组蝌蚪的生长发育均受到显著抑制。持续进行慢性暴露78 d后,4.2 mg·L~(-1)F-处理组蝌蚪的变态率显著升高,而42.8 mg·L~(-1)F-处理组蝌蚪的变态率受到了显著抑制。此外,42.8 mg·L~(-1)F-处理组G42期蝌蚪形态指标(全长、体长和后肢长)以及骨骼发育均受到抑制。依据G42期中国林蛙蝌蚪的生长发育指标和变态率为观察指标,氟离子慢性暴露对中国林蛙蝌蚪的最低可观察效应浓度(LOEC)为0.7 mg·L~(-1)。研究表明,水环境中高浓度的氟污染会对中国林蛙蝌蚪的生长发育、变态和骨骼发育等造成潜在的不利影响,水体氟污染的生态毒性效应理应引起高度重视。