印刷线路板废弃物的热解与动力学实验研究

分别应用管式炉反应器和热重分析手段对印刷线路板废弃物的热解行为和热解动力学进行了实验研究。在管式炉中，研究不同的热解温度：700～950℃，对产物分布和气体成分分布的影响。实验结果表明：PCB热解气体的主要成分是H2和CO2，气体的热值较低，仅为2．09～5．41MJ/m^3，PCB不适合以气体产物为目标的能源利用方式。应用Friedman方法对PCB的热解动力学进行了研究，求得PCB的热解动力学参数分别是：表观活化能190．92kJ/mol，反应级数5．97，指前因子lnA47．14min^-1。     

A/O脱氮工艺的控制策略和应用性研究

根据A/O脱氮工艺的运行状况和影响因素 ,提出了应用在线传感器连续测定曝气池中DO浓度、氨氮浓度和硝酸氮浓度 ,并据此调节供氧强度、内循环回流量、有机碳源的投加以及硝化区和反硝化区的大小 ,这是保证A/O脱氮工艺良好处理效果的重要控制策略和思想。同时对近年来国外A/O脱氮工艺自动控制的应用及研究进行了简单的回顾。     

Selective leaching of valuable metals from waste printed circuit boards

This study was carried out to recover valuable metals from the printed circuit boards (PCBs) of waste computers. PCB samples were crushed to smaller than 1 mm by a shredder and initially separated into 30% conducting and 70% nonconducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation, where it was found that 42% of the conducting materials were magnetic and 58% were nonmagnetic. Leaching of the nonmagnetic component using 2 M H2SO4 and 0.2 M H2O2 at 85 degrees C for 12 hr resulted in greater than 95% extraction of Cu, Fe, Zn, Ni, and Al. Au and Ag were extracted at 40 degrees C with a leaching solution of 0.2 M (NH4)2S2O3, 0.02 M CuSO4, and 0.4 M NH4OH, which resulted in recovery of more than 95% of the Au within 48 hr and 100% of the Ag within 24 hr. The residues were next reacted with a 2 M NaCl solution to leach out Pb, which took place within 2 hr at room temperature.     

林可霉素制药废水的臭氧氧化处理

考察了臭氧氧化对林可霉素的效价削减效果。在初始抗生素浓度为100 mg·L⁻¹时,林可霉素效价削减50%所需消耗的臭氧量为0.118 mg·mg⁻¹抗生素,降解过程符合一级降解动力学特征。进一步采用林可霉素实际废水考察了污水化学需氧量(COD)和pH对抗生素臭氧氧化处理的影响,发现废水的COD每增加100 mg·L⁻¹,则单位抗生素实现50%削减需要增加的臭氧量约为1.64 mg。碱性条件下,臭氧可催化分解生成羟基自由基等活性基团而加速林可霉素的降解。同时,臭氧氧化后林可霉素生产废水的厌氧可生化性提高了98.51%。研究结果可以为林可霉素生产废水的处理技术选择提供参考。     

Insights into aqueous carbofuran removal by modified and non-modified rice husk biochars

Biochar has been considered as a potential sorbent for removal of frequently detected pesticides in water. In the present study, modified and non-modified rice husk biochars were used for aqueous carbofuran removal. Rice husk biochars were produced at 300, 500, and 700 °C in slow pyrolysis and further exposed to steam activation. Biochars were physicochemically characterized using proximate, ultimate, FTIR methods and used to examine equilibrium and dynamic adsorption of carbofuran. Increasing pyrolysis temperature led to a decrease of biochar yield and increase of porosity, surface area, and adsorption capacities which were further enhanced by steam activation. Carbofuran adsorption was pH-dependant, and the maximum (161 mg g^?1) occurred in the vicinity of pH 5, on steam-activated biochar produced at 700 °C. Freundlich model best fitted the sorption equilibrium data. Both chemisorption and physisorption interactions on heterogeneous adsorbent surface may involve in carbofuran adsorption. Langmuir kinetics could be applied to describe carbofuran adsorption in a fixed bed. A higher carbofuran volume was treated in a column bed by a steam-activated biochar versus non-activated biochars. Overall, steam-activated rice husk biochar can be highlighted as a promising low-cost sustainable material for aqueous carbofuran removal.     

电絮凝处理三次采油废水

采用电絮凝技术对含PAM的三次采油废水进行处理,研究了不同极板、pH、电流密度、极板间距、搅拌速度、反应时间以及极性交换周期对大庆三次采油废水处理效果的影响。通过处理效果和成本分析,铝作为极板时处理效果要优于铁板,最佳实验条件下COD去除率达到了94.6%。同时对三次采油废水的主要性质和电絮凝处理三次采油废水的作用机理进行了分析,发现COD主要通过絮凝沉降作用去除,而电化学氧化作用和气浮作用对COD的去除效果并不显著。与普通化学混凝法相比,电絮凝处理三次采油废水在处理效果和成本方面有着独特的优势。     

江苏省某镇土壤重金属污染评价

为了解江苏省某镇表层土壤重金属污染特征,采集并测定了190个土壤样品的As、Cd、Hg和Pb 4种重金属含量,分析土壤重金属的分布特征,综合运用内梅罗综合污染指数法和污染负荷指数法两种评价方法对土壤重金属污染状况进行评价。结果表明：该镇表层土壤中As、Cd和Pb含量平均值高于土壤背景值,Hg与之相反。4种重金属都是主要受到点源污染的影响,其中As的高含量区主要分布在镇的正西边,Cd和Pb的高含量区主要分布在镇的中心区域,Hg的高含量区主要分布在东部以及东北区域。经内梅罗综合污染指数法评价,安全、警戒线、轻污染、中污染和重污染样点的比例分别为5.79%、32.11%、52.11%、4.74%和5.26%。经污染负荷指数法评价,无污染、轻度污染、中度污染和重度污染样点的比例分别为73.69%、25.26%、1.05%和0%。在内梅罗综合污染指数法和污染负荷指数法评价的结果中,有55.26%的样点评价结果相同,而44.74%的样点不同,但都显示出污染程度从镇中心向四周逐渐降低的变化态势。     

燃煤手烧炉有害气体生成特征研究

本文对燃煤手烧炉烟气生成特征进行了分析和研究 ,对燃烧过程二氧化硫、一氧化碳及一氧化氮等有害气体的生成规律和浓度值进行了测定和分析     

反胶束漆酶/纤维素酶体系中油酸酯化的优化

漆酶和纤维素酶在反胶束水核中心具有较强的催化活性。为了对反胶束酶体系中油酸酯化反应深入研究,采用生物表面活性剂鼠李糖脂构建反胶束体系作为漆酶与纤维素酶酯化油酸的催化反应场所。通过实验研究了反胶束体系的不同条件对酯化产物含量的影响。对于反胶束漆酶体系,最佳酯化条件为：含水量W0 40%,鼠李糖脂临界胶束浓度20 mmol·L-1,pH值4,温度40 ℃;对于反胶束纤维素酶体系,最佳酯化条件为：含水量20%,鼠李糖脂临界胶束浓度80 mmol·L-1,pH值4,温度30 ℃。综合考虑几个因素,漆酶比纤维素酶更适合应用于反胶束中油酸的酯化。研究同时采用荧光光谱法对漆酶和纤维素酶在反胶束体系中结构性能的变化进行研究,结果表明,当反胶束体系处于最佳酯化反应条件时,荧光强度最高。     

压力环境下活性污泥的耐盐驯化过程

通过逐步提高盐浓度的梯度盐度方法驯化耐盐活性污泥,采用加压-常压对比实验,探讨活性污泥耐盐驯化过程中,0.3 MPa的压力环境对有机物降解规律、污泥脱氢酶活性及胞外聚合物（EPS）含量的影响。结果表明,经耐盐驯化的活性污泥在5%的高盐度环境下仍可达到75%以上的有机物去除率;当驯化盐度达3.5%及以上,加压耐盐活性污泥有机物去除率及污泥脱氢酶活性均高于常压,其优势更为突出。耐盐驯化过程中活性污泥胞外聚合物（EPS）含量较稳定,加压系统EPS含量低于常压,这可能是加压活性污泥法可以实现原位污泥减量的重要原因之一。