Waste electrical and electronic equipment (WEEE) management in Korea: generation, collection, and recycling systems

In Korea, generation of waste electrical and electronic equipment (WEEE), or electronic waste (e-waste), has rapidly increased in recent years. The management of WEEE has become a major issue of concern for solid waste communities due to the volumes of waste being generated and the potential environmental impacts associated with the toxic chemicals found in most electronic devices. Special attention must be paid when dealing with WEEE because of toxic materials that it contains (e.g., heavy metals, polybrominated diphenyl ethers, phthalates, and polyvinyl chloride). If managed improperly, the disposal of WEEE can adversely affect the environment and human health. Environmental regulatory agencies; electronic equipment manufacturers, retailers, and recyclers; environmental nongovernmental organizations; and many others are much interested in updated statistics with regard to how much WEEE is generated, stored, recycled, and disposed of. In Korea, an extended producer responsibility policy was introduced in 2003 not only to reduce the amount of electronic products requiring disposal, but also to promote resource recovery from WEEE; the policy currently applies to a total of ten electrical and electronic product categories. This article presents an overview of the current recycling practices and management of electrical and electronic waste in Korea. Specifically, the generation rates, recycling systems and processes, and recent regulations of WEEE are discussed. We estimated that 1 263 000 refrigerators, 701 000 washing machines, 1 181 000 televisions, and 109 000 airconditioning units were retired and handled by the WEEE management system in 2006. More than 40% of the products were collected and recycled by producers. Four major producers’ recycling centers and other WEEE recycling facilities are currently in operation, and these process a large faction of WEEE for the recovery of valuable materials. Much attention should still be paid to pollution prevention and resource conservation with respect to WEEE. Several suggestions are made in order to deal with electronic waste management problems effectively and to prevent potential impacts.     

大气汞污染模拟研究进展及控制策略优化方法

简评了国内外大气汞污染模拟相关研究情况,指出目前我国大气汞排放模拟及污染控制研究工作非常缺乏,严重影响了我国汞污染控制策略制定以及"汞环境外交纠纷"的积极应对;并据此建议应该对我国大气汞污染模拟及控制策略优化进行系统研究,其研究内容包括:汞排放清单的建立、大气汞的长程输送、响应面模型软件(response surfac...     

应用Models-3/CMAQ研究长三角区域大气污染及输送

选用美国国家环保局第3代空气质量模式（Models-3，／CMAQ），配合中尺度气象模式（MM5）进行研究，模拟了2001年1、7月份长江三角洲区域冬夏季典型天气条件下大气层二次污染物臭氧及颗粒物的浓度分布及输送状况。采用2001年冬．夏季各10d的小时监测数据对模式验证。结果表明，Models-3／CMAQ对O3、PM10的模拟相关系数分别为0．77和052；一致性指数分别达到081和0．99。模型对于O3略微低估，标准偏差为-31％，而对于PM10则有所高估，标准偏差为46％。对长三角7月份O3浓度及1月份PM10的模拟结果显示，7月份长三角区域16个主要城市O3日均浓度集中在0．043～0．086mg／m^3之间，其中，泰州、扬州．湖州、镇江O3月日均浓度相对较高，均超过0．064mg／m3o模拟时段内O3最高小时浓度达0．276mg／m^3。1月份整个模拟区域PM10月日均浓度为O056mg／m^3，其中，南京市PM10日均浓度最高，达0．080mg／m^3模拟时段内PM10最高小时浓度达0.432mg／m^3研究表明，长三角地区存在明显的污染物输送现象，大气污染已经从局地污染转化为区域污染。     

Comprehensive modeling of HFC-23 incineration in a CDM incinerator

Considering that a significant part of used refrigerants have to be destroyed in an environmentally friendly manner together with the high global warming potential (GWP) of HFCs (hydrofluorocarbons), the development of a proper incineration method of HFCs becomes one of the viable methods in the refrigeration and air-conditioning industry. To this end, in this study, the development of a comprehensive modeling of CHF₃ (HFC-23 or R-23) incineration is made to assist in the proper design and determination of optimal operating condition of a practical HFCs incinerator, since the refrigerant of CHF₃ is one of typical HFCs. For this, numerical investigation was performed by the development of a predictive model for the thermal destruction of the CHF₃ using CH₄–air flames in an incinerator designed for CDM (clean development mechanism) project. First of all, comparison between calculation and operation data was made to evaluate the program developed in this study. Numerical calculation of CHF₃–CH₄–air flame predicts successfully the operation data of a CDM incinerator such as temperature, CHF₃ destruction rate more than 99.99 % and other species concentrations such as CO and NO at the exit of the incinerator. Further parametric study was performed also in terms of important variables such as excess air, amount of steam and incinerator size. In general, the results obtained appear physically acceptable and give a clear physical insight into the role of the important variables. Further work is strongly recommended for the development of a general turbulent reaction model for the thermal destruction of HFCs, especially for the condition of non-equilibrium turbulent reaction dominance.     

长江三角洲地区大气O3和PM10的区域污染特征模拟

以TRACE-P污染源资料及上海市地方排放清单为基础,采用Models-3/CMAQ环境空气质量模型和中尺度气象模式MM5,模拟研究了2001-01和2001-07长三角近地面二次污染物O3及PM 10的浓度分布及输送状况,并以上海市国控点2001年冬、夏季各10 d的小时监测数据对模型进行了验证.验证结果显示,Models-3/CMAQ对O3和PM10的模拟结果与监测值的相关系数分别为0.77和0.52;一致性指数分别达到0.81和0.99.模型对O3小时最高浓度的估算偏低27%,标准偏差为-3.1%;对PM10小时平均浓度的估算偏低10%,标准偏差为46%.模型已具备再现和模拟长三角大气污染输送过程的能力,且误差落在可接受的范围之内.模拟结果显示,2001-07长三角区域16个主要城市中,有14个城市O3小时最大浓度超过国家二级标准,高浓度O3可覆盖苏南和浙北广大区域.2001-01泰州、扬州、南京、镇江、常州等城市受本地排放源和北部大气污染输送的影响显著,大气PM10日均浓度超过PM10国家二级标准.长三角地区环境空气质量与污染类型受大气污染传输与化学转化的影响十分明显.夏季太阳辐射较强时,南部城市排放的污染物常以二次污染物的形式影响下风向城市;太阳辐射较弱的情况下,则以一次污染物输送为主的形式影响周边地区.冬季长三角区域颗粒物污染总体水平较高,这与我国北方地区排放的颗粒物在西北风作用下向长三角输送造成的影响密切相关.长三角地区的大气污染已逐渐从局地转为区域问题.     

广东省工业点源大气汞排放清单更新研究

基于包含工业点源位置、排放信息的2006年广东省环境统计数据和能源统计年鉴,编制了广东省2006年工业点源汞排放清单.利用该清单更新了1999年中国区大气汞排放清单中广东省行政区域内相应的点源清单数据内容.采用CMAQ-Hg模型基于同一气象、初始浓度和边界浓度输入条件对两套清单进行了更新效果评估.结果表明,使用包含工业点源位置及排放细节的bottom-up方法编制的排放清单有效提高了模拟结果的准确度.更新清单前后,本地和跨省大气汞沉降增量差异的初步研究结果说明不同形态的大气汞具备不同的干、湿沉降特征.据此提出,需要尽快开展符合我国实际的各类工业源大气汞排放因子和排放形态因子更新研究.     

Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces

This study examines the adsorption isotherms, kinetics and mechanisms of Pb2(+) sorption onto waste cow bone powder (WCBP) surfaces. The concentrations of Pb2(+) in the study range from 10 to 90 mg/L. Although the sorption data follow the Langmuir and Freundlich isotherm, a detailed examination reveals that surface sorption or complexation and co-precipitation are the most important mechanisms, along with possibly ion exchange and solid diffusion also contributing to the overall sorption process. The co-precipitation of Pb2(+) with the calcium hydroxyapatite (Ca-HAP) is implied by significant changes in Ca2(+) and PO?3? concentrations during the metal sorption processes. The Pb2(+) sorption onto the WCBP surface by metal complexation with surface functional groups such as ≡ POH. The major metal surface species are likely to be ≡ POPb(+). The sorption isotherm results indicated that Pb2(+) sorption onto the Langmuir and Freundlich constant q(max) and K( F ) is 9.52 and 8.18 mg g?1, respectively. Sorption kinetics results indicated that Pb2(+) sorption onto WCBP was pseudo-second-order rate constants K? was 1.12 g mg?1 h?1. The main mechanism is adsorption or surface complexation (≡POPb(+): 61.6%), co-precipitation or ion exchange [Ca?(.)?? Pb?(.)?? (PO?)? (OH): 21.4%] and other precipitation [Pb 50 mg L?1 and natural pH: 17%). Sorption isotherms showed that WCBP has a much higher Pb2(+) removal rate in an aqueous solution; the greater capability of WCBP to remove aqueous Pb2(+) indicates its potential as another promising way to remediate Pb2(+)-contaminated media.     

Potential application of sludge produced from coal mine drainage treatment for removing Zn(II) in an aqueous phase

Various analyses of physico-chemical characteristics and batch tests were conducted with the sludge obtained from a full-scale electrolysis facility for treating coal mine drainage in order to find the applicability of sludge as a material for removing Zn(II) in an aqueous phase. The physico-chemical analysis results indicated that coal mine drainage sludge (CMDS) had a high specific surface area and also satisfied the standard of toxicity characteristic leaching procedure (TCLP) because the extracted concentrations of certain toxic elements such as Pb, Cu, As, Hg, Zn, and Ni were much less than their regulatory limits. The results of X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the CMDS mainly consists of goethite (70%) and calcite (30%) as a weight basis. However, the zeta potential analysis represented that the CMDS had a lower isoelectric point of pH (pH(IEP)) than that of goethite or calcite. This might have been caused by the complexation of negatively charged anions, especially sulfate, which usually exists with a high concentration in coal mine drainage. The results of Fourier transform infrared (FT-IR) spectrometry analysis revealed that Zn(II) was dominantly removed as a form of precipitation by calcite, such as smithsonite [ZnCO?] or hydrozincite [Zn?(CO?)?(OH)?]. Recycling sludge, originally a waste material, for the removal process of Zn(II), as well as other heavy metals, could be beneficial due to its high and speedy removal capability and low economic costs.     

超声气浮+SBR工艺在小城镇垃圾场渗滤液处理中的应用

根据小城镇垃圾渗滤液特点，采用超声气浮技术并加以SBR生化处理工艺进行脱氮处理，处理后氮氮，CODcr,BOD5,悬浮物均达标排放。具有操作简单，灵活，处理成本低，设施可整体搬移的特点，非常适合小城镇小型垃圾卫生填埋场使用。     

Response surface modeling-based source contribution analysis and VOC emission control policy assessment in a typical ozone-polluted urban Shunde, China

To develop a sound ozone (O₃) pollution control strategy, it is important to well understand and characterize the source contribution due to the complex chemical and physical formation processes of O₃. Using the “Shunde” city as a pilot summer case study, we apply an innovative response surface modeling (RSM) methodology based on the Community Multi-Scale Air Quality (CMAQ) modeling simulations to identify the O₃ regime and provide dynamic analysis of the precursor contributions to effectively assess the O₃ impacts of volatile organic compound (VOC) control strategy. Our results show that Shunde is a typical VOC-limited urban O₃ polluted city. The “Jiangmen” city, as the main upper wind area during July 2014, its VOCs and nitrogen oxides (NO_x) emissions make up the largest contribution (9.06%). On the contrary, the contribution from local (Shunde) emission is lowest (6.35%) among the seven neighbor regions. The local VOCs industrial source emission has the largest contribution comparing to other precursor emission sectors in Shunde. The results of dynamic source contribution analysis further show that the local NO_x control could slightly increase the ground O₃ under low (10.00%) and medium (40.00%) reduction ratios, while it could start to turn positive to decrease ground O₃ under the high NO_x abatement ratio (75.00%). The real-time assessment of O₃ impacts from VOCs control strategies in Pearl River Delta (PRD) shows that the joint regional VOCs emission control policy will effectively reduce the ground O₃ concentration in Shunde.