武汉地区水环境中全氟化合物污染水平及其分布特征

武汉作为中国氟化工行业的主要生产基地之一,其水环境中全氟及多氟类化合物(PFASs)污染情况对评估该地区水环境生态安全至关重要。采集了武汉城区10个污水处理厂进、出口污水和19个地表水样品,利用HPLC-ESI-MS/MS技术分析研究该区域水环境中PFASs污染水平及其分布特征。结果发现,武汉地区的污水和地表水样品中,PFASs污染均以短链同系物全氟丁酸(PFBA)和全氟丁基磺酸(PFBS)为主。污水处理厂进、出口污水中PFASs总浓度分别为11.8~12 700 ng·L~(-1)和19.1~9 970 ng·L~(-1)。在城区15个湖水样品中,PFASs总浓度为21.0~10 900 ng·L~(-1);在流经城区的4个江水样品中,PFASs总浓度为4.11~4.77 ng·L~(-1),比湖水样品中PFASs浓度水平低1~2个数量级。与污水中PFASs空间分布趋势一致,各湖泊水样中PFASs总体水平呈现汉口汉阳武昌的趋势,表明城市工业布局与人口密度程度直接影响城市PFASs污染空间分布。值得注意的是,与以往水环境中PFASs污染以全氟辛酸(PFOA)和全氟辛基磺酸(PFOS)为主不同,武汉地区水环境中PFASs污染以短链同系物为主,表明短链替代效应已经渐渐在中国化工领域出现,中国全氟行业在响应国际组织规范和建议的基础上做出了实质性进展。然而,对于短链PFASs的污染特征、迁移运输以及生态风险等科学问题,还需要更进一步的研究。     

Efficacy of woody biomass and biochar for alleviating heavy metal bioavailability in serpentine soil

Crops grown in metal-rich serpentine soils are vulnerable to phytotoxicity. In this study, Gliricidia sepium (Jacq.) biomass and woody biochar were examined as amendments on heavy metal immobilization in a serpentine soil. Woody biochar was produced by slow pyrolysis of Gliricidia sepium (Jacq.) biomass at 300 and 500 °C. A pot experiment was conducted for 6 weeks with tomato (Lycopersicon esculentum L.) at biochar application rates of 0, 22, 55 and 110 t ha^?1. The CaCl₂ and sequential extractions were adopted to assess metal bioavailability and fractionation. Six weeks after germination, plants cultivated on the control could not survive, while all the plants were grown normally on the soils amended with biochars. The most effective treatment for metal immobilization was BC500-110 as indicated by the immobilization efficiencies for Ni, Mn and Cr that were 68, 92 and 42 %, respectively, compared to the control. Biochar produced at 500 °C and at high application rates immobilized heavy metals significantly. Improvements in plant growth in biochar-amended soil were related to decreasing in metal toxicity as a consequence of metal immobilization through strong sorption due to high surface area and functional groups.     

Characterization of hard- and softwood biochars pyrolyzed at high temperature

A wide range of waste biomass/waste wood feedstocks abundantly available at mine sites provide the opportunity to produce biochars for cost-effective improvement of mine tailings and contaminated land at metal mines. In the present study, soft- and hardwood biochars derived from pine and jarrah woods at high temperature (700 °C) were characterized for their physiochemical properties including chemical components, electrical conductivity, pH, zeta potential, cation-exchange capacity (CEC), alkalinity, BET surface area and surface morphology. Evaluating and comparing these characteristics with available data from the literature have affirmed the strong dictation of precursor type on the physiochemical properties of the biochars. The pine and jarrah wood feedstocks are mainly different in their proportions of cellulose, hemicellulose and lignin, resulting in biochars with heterogeneous physiochemical properties. The hardwood jarrah biochar exhibits much higher microporosity, alkalinity and electrostatic capacity than the softwood pine. Correlation analysis and principal component analysis also show a good correlation between CEC–BET–alkalinity, and alkalinity–ash content. These comprehensive characterization and analysis results on biochars’ properties from feedstocks of hardwood (from forest land clearance at mine construction) and waste pine wood (from mining operations) will provide a good guide for tailoring biochar functionalities for remediating metal mine tailings. The relatively inert high-temperature biochars can be stored for a long term at mine closure after decades of operations.     

Trace elements in surface sediments of the Hooghly (Ganges) estuary: distribution and contamination risk assessment

Our objective was to evaluate distribution and accumulation of trace elements (TEs) in surface sediments along the Hooghly (Ganges) River Estuary, India, and to assess the potential risk with view to human health. The TE concentrations (mg kg^?1 dry weight) exhibited a wide range in the following order: Al (31.801 ± 15.943) > Fe (23.337 ± 7584) > Mn (461 ± 147) > S (381 ± 235) > Zn (54 ± 18) > V (43 ± 14) > Cr (39 ± 15) > As (34 ± 15) > Cu (27 ± 11) > Ni (24 ± 9) > Se (17 ± 8) > Co (11 ± 3) > Mo (10 ± 2) > Hg (0.02 ± 0.01). Clay, silt, iron, manganese and sulphur were important for the accumulation of TE in the sediments as confirmed by factor analysis and Pearson correlation. The accumulation and dispersal of TEs were most likely to be governed by both tide-induced processes and anthropogenic inputs from point and non-point sources. Enrichment factor analysis and geoaccumulation index revealed serious contamination of the sediments with Se and As, while comparing the consensus-based sediment quality guidelines (SQGs), adverse biological effects to benthic fauna might be caused by As, Cu, Ni and Cr. This investigation may serve as a model study and recommends continuous monitoring of As, Se, Cu, Ni and Cr to ascertain that SQGs with respect to acceptable levels of TEs to safeguard geochemical health and ecology in the vicinity of this estuary.     

GKS在国家水质管理信息系统中的应用

图形核心系统是开发图形应用软件的一组核心功能描述,它独立于设备和各种高级语言,自８０年代中期被ＩＳＯ正式批准为第一个计算机图形学国际标准以来,世界上各大计算机厂商纷纷推出ＧＫＳ不同级别的实现版本,广大用户也不断将自己的图形应用开发平台转向ＧＫＳ。本研究结合国家水质管理信息系统的需求,以ＧＫＳ为起点,完成了ＮＷＱＭＩＳ图形管理系统的设计与实施,有效地支持了其应用功能的实现。     

微波消解和ASD消解ICP-MS测定土壤中重金属元素的比较

采用微波消解和ASD消解2种消解方式对不同土壤样品进行消解,ICP-MS测定其中重金属含量。微波和ASD2种消解方式均能够较好地提取土壤中的Cr、Co、Ni、Mn和V元素,实验结果的相对误差和相对标准偏差均≤10%,符合实验分析的要求。微波消解精密度优于ASD,可作为优先选择的前处理方法。     

SBR工艺处理高盐度生活污水试验

针对海水冲厕产生的高含盐生活污水,试验采用SBR工艺分别研究了不同海水盐度的污水中有机物的降解及氨氮的去除情况。结果表明,在高盐度污水的生物处理系统中,污泥的驯化是关键的一步。有机物和氨氮的去除率总体上随着盐度的增大而降低,但在海水冲厕范围内(海水比例在30%内,盐度为10500mg/L,Cl-为5700mg/L),海水盐度对有机物及氨氮的去除影响不大。     

藻类生长的水动力学因素影响与数值仿真

为了定量研究水动力条件对藻类生长影响,选择微囊藻进行了室内扰动实验.通过维持光照、温度、营养盐等生境因子的一致性,调整振荡器转速,研究了不同扰动强度对藻类生长规律的影响;提出了"水动力影响参数a"对藻类生长公式进行了修正,以内江为例建立了二维非稳态藻类生长模型.对不同方案下内江藻类暴发特征进行了预测分析.结果表明,水动力条件对藻类生长影响明显,低流速有利于藻类生长,而在静止与高流速条件下,藻类生长受到抑制;内江引航道节制闸关闭后,流速减缓,藻类易于暴发,可能发生水华的水域面积约2.5 km2,占总面积的36.8%;完全静止状态以及节制闸开启后内江水动力条件改善条件下,藻类暴发程度有所减小,可能发生水华面积分别为0.78 km2和0.18 km2.     

太湖流域典型河流沉积物重金属污染特征及生态风险评价

武宜运河位于太湖西部贯穿大部分太湖入湖河流,其重金属污染的研究,对太湖重金属污染来源,流域管理具有重要的意义。因此,2012年8月对武宜运河全程底质调查,分析了沉积物中Cu、Zn、Pb、Ni、Cr等元素,通过地累积指数评价、相关分析、潜在生态风险评价以及相关研究对比分析,得出以下结论:1)Cu、Zn、Pb、Ni、Cr污染浓度均值为129.38,207.74,52.13,28.26,77.06 mg/kg,其中Cu、Zn、Pb、Ni、Cr均超过毒性参考值(TRV),Cu超标达800%。Zn、Pb、Cr在世界湖泊沉积物中微量金属的范围(WCTMEL)内,Cu超出144%,Ni略低于WCTMEL;2)Ni-Cr、Zn-Pb具有较好的同源性。且Cu、Zn污染较高,达到"中—强"和"强"污染级别,Pb污染级别其次,Ni、Cr污染级别较低或无污染。可以排除武宜运河携带Ni、Cr污染物进入入湖河网的可能;3)Cu为武宜运河生态风险主要贡献因子。需加强工业园区地段重金属污染控制,减少污染来源,加大武宜运河对连同入湖水系的清水补充。     

控制氧化对湿法烟气脱硫过程的影响研究

在喷射鼓泡反应器上进行了控制氧化对湿法烟气脱硫过程的影响研究,测定了脱硫率η和pH随时间t的变化规律,得出了η与t的回归式及η与pH值的关系规律,讨论了不同曝气强度及抑制剂浓度对CaCO3利用率α、pH值及脱硫率η的影响。实验表明强制氧化及抑制氧化均能提高脱硫效率η及CaCO3利用率α,但对浆液pH值的影响正好相反,强制氧化使浆液pH值下降的更快,而抑制氧化则使浆液pH值有所提高。