城市水资源供需经济分析与对策

本文通过对水价与需求关系的探讨,推导出水价与需求的理想公式,并就该公式进行了分析,提出了解决城市水资源供需矛盾的经济对策。     

四川彭县银厂沟峡谷自然景观成因初探

四川省彭县银厂沟峡谷全长21公里,峡谷和原始森林保存完整。时隐时现的“彩虹”出现于峡谷两岸的瀑布上。区内自然景观丰富多彩。本文根据旅游地质调查工作成果,对自然景观的成因作了初步探讨。     

新型电极及其电解阳离子染料染色模拟液研究

本文研制了一种可用于废水处理的新型阳极和阴极，研制电极电解处理离子染料色模拟液时，分解电压低，脱色率高，电能消耗少。     

Biodegradable plastic made from soybean products. II. Effects of cross-linking and cellulose incorporation on mechanical properties and water absorption

Soy isolate was treated with formaldehyde and glyoxal at 1.0, 2.5, and 5.0% (w/w isolate) and with adipic and acetic anhydrides. The materials were then compression-molded into plastic tensile bars and tested for tensile and yield strength, percentage elongation, Young's modulus, and water absorption. Treatment with 5% formaldehyde increased the tensile strength significantly, to 4.9 kg/mm², compared with the untreated sample (3.7 kg/mm²). The yield strength increased slightly, to 0.68 kg/mm². Elongation was significantly less after treatment with formaldehyde. Young's modulus increased after treatment and leveled off at 174 kg/mm². Water absorption decreased as the formaldehyde concentration increased. Treatment with either glyoxal or adipic/acetic anhydride had a detrimental effect on the mechanical properties of the plastic specimens. Water absorption was decreased by glyoxal treatment but was not affected by adipic/acetic anhydride treatment. Long-fiber (lf), short-fiber (sf), and microcrystalline (mc) cellulose were incorporated into soy isolate at various levels. Cellulose addition decreased the percentage elongation and increased the rigidity of the plastic. All three cellulose additions increased Young's modulus. The tensile strength increased with the addition of sf-cellulose to soy isolate; lf-cellulose decreased the tensile strength, whereas the incorporation of mc-cellulose did not have a significant effect. The yield strength increased slightly with the addition of sf-cellulose and was less affected by the addition of lf- or mc-cellulose. All three types of cellulose slightly decreased water absorption at ca. 15% content.Journal Paper No. J-15563 of the Iowa Agriculture and Home Economics Experiment Station, Ames; Project No. 2863.     

洪水灾害损失信息系统—FLOODIS系统设计

本文借助遥感技术，设计出一个专题地理信息系统一洪灾损失信息系统ＦＬＯＯＤＩＳ，为损失评估模型提供评估区域洪水灾害损失的各种自然地理和社会经济信息以及经系统内专家模块处理后的专题信息，同时对其计算结果进行多种方式输出。     

Study of factors associated with risk of work-related stairway falls

This report describes a study of stairway risk factors based on video tape recordings of workers using 31 flights of stairs selected from among the industries with the highest frequency and severity rates for stair-related injuries. The video tapes were reviewed to identify all incidents, i.e., falls, trips, slips, missteps, and moments of temporary instability. The characteristics of the 98 stair users who were involved in an incident were compared to the characteristics of a matched group of stair users who did not have incidents. The factors that best discriminated between the incident group and the nonincident group were: (a) The incident group tended to be those whose movement was impeded by others and who were older; and (b) The nonincident group tended to be those who were wearing glasses and those who were very large or heavy individuals. The influence of stairway physical features on the risk of injury was examined using correlation analysis. The measure of risk was the incidence rate (observed incidents per number of observed uses) for each flight as well as for each tread. Among the several variables significantly correlated with higher incidence rate are: (a) higher effective riser height and less effective tread depth; the safest stairs have an effective riser height not greater than 7 in. (18 cm) and an effective tread depth no less than 11 in. (27 cm); and (b) for descent only (92% of the injuries), the size of the nosing projection; it appears that nosing projections that exceed $\text{11}\text{16}$ in. (1.8 cm) are associated with higher incidence rates.     

易燃易爆重大危险源安全监测系统校验的等周期数学模型

按照校验费和损失费最小以及有效度最大的原则分别给出了安全监测系统校验的等周期模型。当安全监测系统的无故障工作时间服从威布尔分布时，给出了模型的解法。     

膜生物反应器废水处理新工艺

概述了国内外膜生物反应器的研究与应用状况；介绍了其构形与特点；分析了膜污染的成因，影响因素及防制措施；指出了今后的研究方向。     

Renewable Resources and Enzymatic Processes to Create Functional Polymers: Adapting Materials and Reactions from Food Processing

We are exploiting materials and concepts from food science to create functionalized, environmentally friendly derivatives of the biopolymer chitosan, a byproduct of seafood processing. Functional groups are grafted onto chitosan using tyrosinase, the enzyme responsible for food browning. The functionalizing groups studied include low-molecular-weight phenols derived from natural sources and high-molecular-weight proteins. The approach of using low-molecular-weight phenols to functionalize chitosan is illustrated with arbutin, a natural phenol found in pears. Results demonstrate that tyrosinase initiates reactions that lead to the conversion of arbutin–chitosan solutions into gels. These gels can be rapidly broken by treatment with the chitosan-hydrolyzing enzyme chitosanase, demonstrating that the chitosan derivatives remain biodegradable. We briefly review other studies in which low-molecular-weight natural phenols are enzymatically grafted onto chitosan to confer functional properties. The creation of co-polymers is illustrated by results in which tyrosinase is used to couple gelatin onto chitosan. Gelatin is a proteinaceous byproduct of meat production. The tyrosinase-generated gelatin–chitosan conjugates have been observed to offer interesting rheological and thermal properties. These results demonstrate the potential for using renewable resources and enzymatic processing to create environmentally friendly polymers with useful functional properties.     

四川盆地森林覆盖率自然影响因素分析

本文对四川盆地森林覆盖率的影响因素进行逐步回归分析,结果表明影响森林覆盖率的自然因素是综合的,它包括气候、地貌、土壤等自然条件。其中以7月降水量、地形崎岖度、山地比例、酸性紫色土比例及土地垦殖系数等作为决定四川森林覆盖率变化的最重要因素,这5个因素即可解释盆地森林覆盖率80%以上的变化。