生物焦炭滴滤塔降解苯乙烯废气的中试启动研究

苯乙烯废气既是一种挥发性有机化合物（VOCs），又属于我国恶臭气体控制的范围之内。其作为一种化工原料和有机溶剂广泛应用于工业生产中。生物法处理有机废气具有运行费用低和没有二次污染等优点。采用焦炭填料滴滤塔对苯乙烯废气的处理进行了中试启动研究。启动过程中，进气浓度范围是50—114mg／m^3，去除率为30％～45％左右，最高可达90％左右。所采用的焦炭填料可以认为是一种环境友好型填料，废弃后可作为燃料，值得推广。     

Clomazone dissipation, adsorption and translocation in four paddy topsoils

IntroductionClomazone,(2 [(2 chlorophenyl)methyl ] 4 ,4 dimethyl 3 isoxazolidinone) ,isasoil appliedisoxazolidinoneherbicideproducedbyFMCCorp .Itisintroducedforannualgrassandbroad spectrumweedsinsoybeans(Rani,1998;Vyas,2 0 0 0 ) .Itisalsocurrentlyregis…     

火车站环境污染及防治措施

火车站候车室内的粉尘，烟尘 气溶胶 有毒有害气体危害人体健康，人群集中，流动量大易恶化空气质量，传播疾病，应围绕改善空气质量，控制疾病传播建立和实施严格的管理制度，以防治火车站的环境污染。     

The curve of ion exchange ratio(%)-pH of the interaction between suspended particles with Cd(II) in the Yellow River

The curve of ion exchange ratio(%)-pH of the interactionbetween suspended particles with Cd(II) in the Yellow River wasstudied. The effects of lysine on this curve have been alsoinvestigated. The results showed that (1) Cadmium in Cd(OH)+ formin the suspended particles exchanges with the cations.The exchangeratio of Cd2+ is nearly at its greatest value in the range of pH(8.0-8.5) in natural aquatic system; (2) Ion exchange ratiodecreases as the concentration of Cd2+ raises from 8.9×10-6 mol/L to 2x8.9 x 10-6mol/L; (3) At the lysine concentration of 6.8x10-6 mol/L, it can promote the ion exchange ratio; (4) Adsorption of thesuspended particles to cadmium is weaker in seawater and Jin ShaRiver than in the Yellow River.     

中扬子台地北缘灯影组碳酸盐岩成岩作用序列及成岩模式

研究区主要的成岩作用类型有胶结、溶解、硅化、白云石化、压实-压溶和去白云石化作用等，详细研究了每种成岩作用的矿物岩石学特征及对孔隙形成、演化的影响。把研究区成岩环境划分为大气淡水成岩环境、海水成岩环境、混合水成岩环境、埋藏成岩环境和晚期表生成岩环境五大类．总结了每种成岩环境的成岩组构特征、成岩标志、δ18O和δC及微量元素Na+、Sr2+的分布规律。此外，还探讨了深水斜坡相粉-细晶白云岩和台地浅滩相颗粒白云岩的成岩演化序列与孔隙演化，最后概括出了研究区碳酸盐岩的成岩作用模式。     

县级生态农业建设的人工神经网络模型

引入人工神经网络的评价识别方法，建立了ＢＰ模型，以前人建立的县级生态农业建设评价指标体系评价标准，和某县生态农业综合评价指标数据为实例，比较ＢＰ模型的有效性，得到的评价分类结果和指标优先发展顺序决策与实际情况相吻合。     

湖泊水质富营养化评价的多准则神经网络法

提出了基于误差平方和准则与模糊熵准则下的多准则神经网络湖泊水质营养化评价模型，并将其应用于我国五大湖泊水质营养化的评价。结果表明，多准则神经网络用于湖泊水质营养化评价，具有简便，实用，客观和广泛的通用性     

Removal of high concentrated ammonia nitrogen from landfill leachate by landfilled waste layer

The landfill of municipal solid waste(MSW) could be regarded as denitrification reactor and involved in ammonia nitrogen biological removal process. In this research, the process was applied to municipal solid waste collected in Shanghai, China, which was characterized by high food waste content. The NH4^ removal efficiency in the system of SBR nitrifying reactor followed by fresh and matured landfilled waste layer in series was studied. In the nitrifying reactor, above 90% of NH4^ in leachate was oxidized to NO2^- and NO3^- . Then high concentrated NO2^- and NO3^- were removed in the way of denitrification process in fresh landfilled waste layer. At the same time, degradation of fresh landfilled waste was accelerated. Up to the day 120, 136.5 gC/(kg dry waste) and 17.9 gN/(kg dry waste) were converted from waste layer. It accounted for 50.15 % and 86.89 % of the total carbon and nitrogen content of preliminary fresh waste, which was 4.42 times and 5.17 times higher than that of reference column respectively. After filtering through matured landfilled waste, BOD5 concentration in leachate dropped to below 100 mg/L, which would not affect following nitrification adversely. Because the matured landfilled waste acted as a well methanogenic reactor, 23% of carbon produced accumulatively from fresh landfilled waste degradation was converted into CH4.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

我国与国外民间直升机救援的比较研究

本文通过对国外和我国民间直升机的救援现状进行分析,从救援装备、专业人才、基础设施、政策法规、运营模式等方面做了对比研究,发现我国在各方面都存在较大差距,提出了构建我国民间直升机救援体系的具体措施。